From 230dec61313dc5f5720311d0b492f69f5466b0a4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 23 Sep 2011 02:12:48 +0000 Subject: [PATCH] net/fec: add imx6q enet support The imx6q enet is a derivative of imx28 enet controller. It fixed the frame endian issue found on imx28, and added 1 Gbps support. It also fixes a typo on vendor name in Kconfig. Signed-off-by: Shawn Guo Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/Kconfig | 9 +++-- drivers/net/ethernet/freescale/fec.c | 66 +++++++++++++++++++++++++++------- 2 files changed, 57 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index 4dbe41f1cbc6..1cf671643d1f 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_FREESCALE default y depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \ M523x || M527x || M5272 || M528x || M520x || M532x || \ - IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC || \ + ARCH_MXC || ARCH_MXS || \ (PPC_MPC52xx && PPC_BESTCOMM) ---help--- If you have a network (Ethernet) card belonging to this class, say Y @@ -16,16 +16,15 @@ config NET_VENDOR_FREESCALE Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all - the questions about IBM devices. If you say Y, you will be asked for - your specific card in the following questions. + the questions about Freescale devices. If you say Y, you will be + asked for your specific card in the following questions. if NET_VENDOR_FREESCALE config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \ - IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC) - default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM + ARCH_MXC || ARCH_MXS) select PHYLIB ---help--- Say Y here if you want to use the built-in 10/100 Fast ethernet diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 2bbe6a519bf4..cce78ceb63ed 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -18,7 +18,7 @@ * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) * Copyright (c) 2004-2006 Macq Electronique SA. * - * Copyright (C) 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. */ #include @@ -72,6 +72,8 @@ #define FEC_QUIRK_SWAP_FRAME (1 << 1) /* Controller uses gasket */ #define FEC_QUIRK_USE_GASKET (1 << 2) +/* Controller has GBIT support */ +#define FEC_QUIRK_HAS_GBIT (1 << 3) static struct platform_device_id fec_devtype[] = { { @@ -88,6 +90,9 @@ static struct platform_device_id fec_devtype[] = { .name = "imx28-fec", .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME, }, { + .name = "imx6q-fec", + .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT, + }, { /* sentinel */ } }; @@ -97,12 +102,14 @@ enum imx_fec_type { IMX25_FEC = 1, /* runs on i.mx25/50/53 */ IMX27_FEC, /* runs on i.mx27/35/51 */ IMX28_FEC, + IMX6Q_FEC, }; static const struct of_device_id fec_dt_ids[] = { { .compatible = "fsl,imx25-fec", .data = &fec_devtype[IMX25_FEC], }, { .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], }, { .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], }, + { .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fec_dt_ids); @@ -373,6 +380,7 @@ fec_restart(struct net_device *ndev, int duplex) int i; u32 temp_mac[2]; u32 rcntl = OPT_FRAME_SIZE | 0x04; + u32 ecntl = 0x2; /* ETHEREN */ /* Whack a reset. We should wait for this. */ writel(1, fep->hwp + FEC_ECNTRL); @@ -442,18 +450,23 @@ fec_restart(struct net_device *ndev, int duplex) /* Enable flow control and length check */ rcntl |= 0x40000000 | 0x00000020; - /* MII or RMII */ - if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) + /* RGMII, RMII or MII */ + if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII) + rcntl |= (1 << 6); + else if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) rcntl |= (1 << 8); else rcntl &= ~(1 << 8); - /* 10M or 100M */ - if (fep->phy_dev && fep->phy_dev->speed == SPEED_100) - rcntl &= ~(1 << 9); - else - rcntl |= (1 << 9); - + /* 1G, 100M or 10M */ + if (fep->phy_dev) { + if (fep->phy_dev->speed == SPEED_1000) + ecntl |= (1 << 5); + else if (fep->phy_dev->speed == SPEED_100) + rcntl &= ~(1 << 9); + else + rcntl |= (1 << 9); + } } else { #ifdef FEC_MIIGSK_ENR if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) { @@ -478,8 +491,15 @@ fec_restart(struct net_device *ndev, int duplex) } writel(rcntl, fep->hwp + FEC_R_CNTRL); + if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { + /* enable ENET endian swap */ + ecntl |= (1 << 8); + /* enable ENET store and forward mode */ + writel(1 << 8, fep->hwp + FEC_X_WMRK); + } + /* And last, enable the transmit and receive processing */ - writel(2, fep->hwp + FEC_ECNTRL); + writel(ecntl, fep->hwp + FEC_ECNTRL); writel(0, fep->hwp + FEC_R_DES_ACTIVE); /* Enable interrupts we wish to service */ @@ -490,6 +510,8 @@ static void fec_stop(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); + const struct platform_device_id *id_entry = + platform_get_device_id(fep->pdev); /* We cannot expect a graceful transmit stop without link !!! */ if (fep->link) { @@ -504,6 +526,10 @@ fec_stop(struct net_device *ndev) udelay(10); writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); + + /* We have to keep ENET enabled to have MII interrupt stay working */ + if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) + writel(2, fep->hwp + FEC_ECNTRL); } @@ -918,6 +944,8 @@ static int fec_enet_mdio_reset(struct mii_bus *bus) static int fec_enet_mii_probe(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); + const struct platform_device_id *id_entry = + platform_get_device_id(fep->pdev); struct phy_device *phy_dev = NULL; char mdio_bus_id[MII_BUS_ID_SIZE]; char phy_name[MII_BUS_ID_SIZE + 3]; @@ -949,14 +977,18 @@ static int fec_enet_mii_probe(struct net_device *ndev) snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, 0, - PHY_INTERFACE_MODE_MII); + fep->phy_interface); if (IS_ERR(phy_dev)) { printk(KERN_ERR "%s: could not attach to PHY\n", ndev->name); return PTR_ERR(phy_dev); } /* mask with MAC supported features */ - phy_dev->supported &= PHY_BASIC_FEATURES; + if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) + phy_dev->supported &= PHY_GBIT_FEATURES; + else + phy_dev->supported &= PHY_BASIC_FEATURES; + phy_dev->advertising = phy_dev->supported; fep->phy_dev = phy_dev; @@ -1006,8 +1038,16 @@ static int fec_enet_mii_init(struct platform_device *pdev) /* * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed) + * + * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while + * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'. The i.MX28 + * Reference Manual has an error on this, and gets fixed on i.MX6Q + * document. */ - fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000) << 1; + fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000); + if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) + fep->phy_speed--; + fep->phy_speed <<= 1; writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); fep->mii_bus = mdiobus_alloc(); -- 2.11.0