From 270e70713b3a52fcd0a2f39f14b78b109ccfb944 Mon Sep 17 00:00:00 2001 From: Jemma Denson Date: Thu, 30 Apr 2015 17:05:14 -0300 Subject: [PATCH] [media] cx24120: Add missing command to cx24120_check_cmd This patch adds in a missing command to cx24120_check_cmd. This part of the old reverse engineered driver was quite hard to follow - it's presumed the compiler did some neat optimisation that wasn't easy to decode. This command was checked for in that version but not copied across to the new switch statement. For reference, old reverse engineered code: xxzz = cmd->id - 0x11; // look for specific message id if ( xxzz <= 0x13 ) { msg_cmd_mask = 1 << xxzz; //0x0F8021 // if cmd_id 17 or 22 or 33-36, 42, 47, 57-61 etc. disable mpeg output if ( msg_cmd_mask & 0x0F8021 ) { // 000011111000000000100001b cx24120_msg_mpeg_output_global_config(state, 0); msleep(100); state->dvb_s2_mode &= 0xFD; // reset mpeg out enable flag } } Signed-off-by: Jemma Denson Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/cx24120.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb-frontends/cx24120.c b/drivers/media/dvb-frontends/cx24120.c index 554601512ee4..095af2e6f59f 100644 --- a/drivers/media/dvb-frontends/cx24120.c +++ b/drivers/media/dvb-frontends/cx24120.c @@ -352,6 +352,7 @@ static void cx24120_check_cmd(struct cx24120_state *state, u8 id) case CMD_DISEQC_MSG2: case CMD_SETVOLTAGE: case CMD_SETTONE: + case CMD_DISEQC_BURST: cx24120_msg_mpeg_output_global_config(state, 0); /* Old driver would do a msleep(100) here */ default: -- 2.11.0