From 27d9a5e93842852c198aae9f45fd6c272bf2b374 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 20 Dec 2011 13:55:47 -0200 Subject: [PATCH] [media] tda10021: Don't use a magic numbers for QAM modulation Convert the existing data struct to use the QAM modulation macros, instead of assuming that they're numbered from 0 to 5. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda10021.c | 59 +++++++++++++++++++++------------- 1 file changed, 37 insertions(+), 22 deletions(-) diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index 6ca533ea0f0e..cd9952ed295b 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -224,27 +224,43 @@ static int tda10021_init (struct dvb_frontend *fe) return 0; } +struct qam_params { + u8 conf, agcref, lthr, mseth, aref; +}; + static int tda10021_set_parameters (struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { struct tda10021_state* state = fe->demodulator_priv; - - //table for QAM4-QAM256 ready QAM4 QAM16 QAM32 QAM64 QAM128 QAM256 - //CONF - static const u8 reg0x00 [] = { 0x14, 0x00, 0x04, 0x08, 0x0c, 0x10 }; - //AGCREF value - static const u8 reg0x01 [] = { 0x78, 0x8c, 0x8c, 0x6a, 0x78, 0x5c }; - //LTHR value - static const u8 reg0x05 [] = { 0x78, 0x87, 0x64, 0x46, 0x36, 0x26 }; - //MSETH - static const u8 reg0x08 [] = { 0x8c, 0xa2, 0x74, 0x43, 0x34, 0x23 }; - //AREF - static const u8 reg0x09 [] = { 0x96, 0x91, 0x96, 0x6a, 0x7e, 0x6b }; - + static const struct qam_params qam_params[] = { + /* Modulation Conf AGCref LTHR MSETH AREF */ + [QPSK] = { 0x14, 0x78, 0x78, 0x8c, 0x96 }, + [QAM_16] = { 0x00, 0x8c, 0x87, 0xa2, 0x91 }, + [QAM_32] = { 0x04, 0x8c, 0x64, 0x74, 0x96 }, + [QAM_64] = { 0x08, 0x6a, 0x46, 0x43, 0x6a }, + [QAM_128] = { 0x0c, 0x78, 0x36, 0x34, 0x7e }, + [QAM_256] = { 0x10, 0x5c, 0x26, 0x23, 0x6b }, + }; int qam = p->u.qam.modulation; - if (qam < 0 || qam > 5) + /* + * gcc optimizes the code bellow the same way as it would code: + * "if (qam > 5) return -EINVAL;" + * Yet, the code is clearer, as it shows what QAM standards are + * supported by the driver, and avoids the usage of magic numbers on + * it. + */ + switch (qam) { + case QPSK: + case QAM_16: + case QAM_32: + case QAM_64: + case QAM_128: + case QAM_256: + break; + default: return -EINVAL; + } if (p->inversion != INVERSION_ON && p->inversion != INVERSION_OFF) return -EINVAL; @@ -256,15 +272,14 @@ static int tda10021_set_parameters (struct dvb_frontend *fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); } - tda10021_set_symbolrate (state, p->u.qam.symbol_rate); - _tda10021_writereg (state, 0x34, state->pwm); - - _tda10021_writereg (state, 0x01, reg0x01[qam]); - _tda10021_writereg (state, 0x05, reg0x05[qam]); - _tda10021_writereg (state, 0x08, reg0x08[qam]); - _tda10021_writereg (state, 0x09, reg0x09[qam]); + tda10021_set_symbolrate(state, p->u.qam.symbol_rate); + _tda10021_writereg(state, 0x34, state->pwm); - tda10021_setup_reg0 (state, reg0x00[qam], p->inversion); + _tda10021_writereg(state, 0x01, qam_params[qam].agcref); + _tda10021_writereg(state, 0x05, qam_params[qam].lthr); + _tda10021_writereg(state, 0x08, qam_params[qam].mseth); + _tda10021_writereg(state, 0x09, qam_params[qam].aref); + tda10021_setup_reg0(state, qam_params[qam].conf, p->inversion); return 0; } -- 2.11.0