From 28f74201e37ccf3063e359bfe346b09400af9bab Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 27 Feb 2022 13:44:31 +0000 Subject: [PATCH] ARM: pxa: remove Intel Imote2 and Stargate 2 boards I have no reason to believe these boards have any more users and I haven't tested them for several years. Removing them may simplify other changes to the various PXA boards people still care about. The recent conversion of pxa2xx_spi to GPIO descriptors for example had to update this board despite no one caring or testing. Great boards that got me started in kernel development, RIP! Signed-off-by: Jonathan Cameron Acked-by: Mark Brown Acked-by: Daniel Mack Cc: Robert Jarzmik Cc: Haojian Zhuang Cc: soc@kernel.org Link: https://lore.kernel.org/r/20220227134431.908998-1-jic23@kernel.org' Signed-off-by: Arnd Bergmann --- MAINTAINERS | 7 - arch/arm/configs/pxa_defconfig | 3 - arch/arm/mach-pxa/Kconfig | 10 - arch/arm/mach-pxa/Makefile | 2 - arch/arm/mach-pxa/include/mach/uncompress.h | 3 +- arch/arm/mach-pxa/stargate2.c | 1030 --------------------------- drivers/pcmcia/Kconfig | 2 +- drivers/pcmcia/Makefile | 1 - drivers/pcmcia/pxa2xx_stargate2.c | 137 ---- sound/soc/pxa/Kconfig | 9 - sound/soc/pxa/Makefile | 2 - sound/soc/pxa/imote2.c | 99 --- 12 files changed, 2 insertions(+), 1303 deletions(-) delete mode 100644 arch/arm/mach-pxa/stargate2.c delete mode 100644 drivers/pcmcia/pxa2xx_stargate2.c delete mode 100644 sound/soc/pxa/imote2.c diff --git a/MAINTAINERS b/MAINTAINERS index 69a2935daf6c..573e5ee54162 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2116,13 +2116,6 @@ F: Documentation/devicetree/bindings/arm/intel,keembay.yaml F: arch/arm64/boot/dts/intel/keembay-evm.dts F: arch/arm64/boot/dts/intel/keembay-soc.dtsi -ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT -M: Jonathan Cameron -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: arch/arm/mach-pxa/stargate2.c -F: drivers/pcmcia/pxa2xx_stargate2.c - ARM/INTEL XSC3 (MANZANO) ARM CORE M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index dedaaae3d0d8..29b1f192afbb 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -41,8 +41,6 @@ CONFIG_MACH_EXEDA=y CONFIG_MACH_CM_X300=y CONFIG_MACH_CAPC7117=y CONFIG_ARCH_GUMSTIX=y -CONFIG_MACH_INTELMOTE2=y -CONFIG_MACH_STARGATE2=y CONFIG_MACH_XCEP=y CONFIG_TRIZEPS_PXA=y CONFIG_MACH_TRIZEPS4WL=y @@ -487,7 +485,6 @@ CONFIG_SND_SOC_ZYLONITE=m CONFIG_SND_PXA2XX_SOC_HX4700=m CONFIG_SND_PXA2XX_SOC_MAGICIAN=m CONFIG_SND_PXA2XX_SOC_MIOA701=m -CONFIG_SND_PXA2XX_SOC_IMOTE2=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_WM8978=m CONFIG_SND_SIMPLE_CARD=m diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f7520a6cc7d4..57f0be4065c1 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -153,16 +153,6 @@ config GUMSTIX_AM300EPD endchoice -config MACH_INTELMOTE2 - bool "Intel Mote 2 Platform" - select IWMMXT - select PXA27x - -config MACH_STARGATE2 - bool "Intel Stargate 2 Platform" - select IWMMXT - select PXA27x - config MACH_XCEP bool "Iskratel Electronics XCEP" select MTD diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 177abe584dd5..68730ceb8b7c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -45,8 +45,6 @@ obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o -obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o -obj-$(CONFIG_MACH_STARGATE2) += stargate2.o obj-$(CONFIG_MACH_XCEP) += xcep.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index c36306064eee..f71a8dafa6e0 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -58,8 +58,7 @@ static inline void arch_decomp_setup(void) uart_shift = 2; uart_is_pxa = 1; - if (machine_is_littleton() || machine_is_intelmote2() - || machine_is_csb726() || machine_is_stargate2() + if (machine_is_littleton() || machine_is_csb726() || || machine_is_cm_x300() || machine_is_balloon3()) uart_base = STUART_BASE; diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c deleted file mode 100644 index 8ca02ec1d44c..000000000000 --- a/arch/arm/mach-pxa/stargate2.c +++ /dev/null @@ -1,1030 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/stargate2.c - * - * Author: Ed C. Epp - * Created: Nov 05, 2002 - * Copyright: Intel Corp. - * - * Modified 2009: Jonathan Cameron - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "pxa27x.h" -#include -#include "udc.h" -#include "pxa27x-udc.h" -#include - -#include -#include -#include - -#include "devices.h" -#include "generic.h" - -#define STARGATE_NR_IRQS (IRQ_BOARD_START + 8) - -/* Bluetooth */ -#define SG2_BT_RESET 81 - -/* SD */ -#define SG2_GPIO_nSD_DETECT 90 -#define SG2_SD_POWER_ENABLE 89 - -static unsigned long sg2_im2_unified_pin_config[] __initdata = { - /* Device Identification for wakeup*/ - GPIO102_GPIO, - /* DA9030 */ - GPIO1_GPIO, - - /* MMC */ - GPIO32_MMC_CLK, - GPIO112_MMC_CMD, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - - /* 802.15.4 radio - driver out of mainline */ - GPIO22_GPIO, /* CC_RSTN */ - GPIO114_GPIO, /* CC_FIFO */ - GPIO116_GPIO, /* CC_CCA */ - GPIO0_GPIO, /* CC_FIFOP */ - GPIO16_GPIO, /* CCSFD */ - GPIO115_GPIO, /* Power enable */ - - /* I2C */ - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, - - /* SSP 3 - 802.15.4 radio */ - GPIO39_GPIO, /* Chip Select */ - GPIO34_SSP3_SCLK, - GPIO35_SSP3_TXD, - GPIO41_SSP3_RXD, - - /* SSP 2 to daughter boards */ - GPIO11_SSP2_RXD, - GPIO38_SSP2_TXD, - GPIO36_SSP2_SCLK, - GPIO37_GPIO, /* chip select */ - - /* SSP 1 - to daughter boards */ - GPIO24_GPIO, /* Chip Select */ - GPIO23_SSP1_SCLK, - GPIO25_SSP1_TXD, - GPIO26_SSP1_RXD, - - /* BTUART Basic Connector*/ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART - IM2 via debug board not sure on SG2*/ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* Basic sensor board */ - GPIO96_GPIO, /* accelerometer interrupt */ - GPIO99_GPIO, /* ADC interrupt */ - - /* SHT15 */ - GPIO100_GPIO, - GPIO98_GPIO, - - /* Basic sensor board */ - GPIO96_GPIO, /* accelerometer interrupt */ - GPIO99_GPIO, /* ADC interrupt */ - - /* Connector pins specified as gpios */ - GPIO94_GPIO, /* large basic connector pin 14 */ - GPIO10_GPIO, /* large basic connector pin 23 */ -}; - -static struct gpiod_lookup_table sht15_gpiod_table = { - .dev_id = "sht15", - .table = { - /* FIXME: should this have |GPIO_OPEN_DRAIN set? */ - GPIO_LOOKUP("gpio-pxa", 100, "data", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", 98, "clk", GPIO_ACTIVE_HIGH), - }, -}; - -static struct platform_device sht15 = { - .name = "sht15", - .id = -1, -}; - -static struct regulator_consumer_supply stargate2_sensor_3_con[] = { - REGULATOR_SUPPLY("vcc", "sht15"), -}; - -enum stargate2_ldos{ - vcc_vref, - vcc_cc2420, - /* a mote connector? */ - vcc_mica, - /* the CSR bluecore chip */ - vcc_bt, - /* The two voltages available to sensor boards */ - vcc_sensor_1_8, - vcc_sensor_3, - /* directly connected to the pxa27x */ - vcc_sram_ext, - vcc_pxa_pll, - vcc_pxa_usim, /* Reference voltage for certain gpios */ - vcc_pxa_mem, - vcc_pxa_flash, - vcc_pxa_core, /*Dc-Dc buck not yet supported */ - vcc_lcd, - vcc_bb, - vcc_bbio, /*not sure!*/ - vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/ -}; - -/* The values of the various regulator constraints are obviously dependent - * on exactly what is wired to each ldo. Unfortunately this information is - * not generally available. More information has been requested from Xbow. - */ -static struct regulator_init_data stargate2_ldo_init_data[] = { - [vcc_bbio] = { - .constraints = { /* board default 1.8V */ - .name = "vcc_bbio", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_bb] = { - .constraints = { /* board default 2.8V */ - .name = "vcc_bb", - .min_uV = 2700000, - .max_uV = 3000000, - }, - }, - [vcc_pxa_flash] = { - .constraints = {/* default is 1.8V */ - .name = "vcc_pxa_flash", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_cc2420] = { /* also vcc_io */ - .constraints = { - /* board default is 2.8V */ - .name = "vcc_cc2420", - .min_uV = 2700000, - .max_uV = 3300000, - }, - }, - [vcc_vref] = { /* Reference for what? */ - .constraints = { /* default 1.8V */ - .name = "vcc_vref", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_sram_ext] = { - .constraints = { /* default 2.8V */ - .name = "vcc_sram_ext", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_mica] = { - .constraints = { /* default 2.8V */ - .name = "vcc_mica", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_bt] = { - .constraints = { /* default 2.8V */ - .name = "vcc_bt", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_lcd] = { - .constraints = { /* default 2.8V */ - .name = "vcc_lcd", - .min_uV = 2700000, - .max_uV = 3300000, - }, - }, - [vcc_io] = { /* Same or higher than everything - * bar vccbat and vccusb */ - .constraints = { /* default 2.8V */ - .name = "vcc_io", - .min_uV = 2692000, - .max_uV = 3300000, - }, - }, - [vcc_sensor_1_8] = { - .constraints = { /* default 1.8V */ - .name = "vcc_sensor_1_8", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_sensor_3] = { /* curiously default 2.8V */ - .constraints = { - .name = "vcc_sensor_3", - .min_uV = 2800000, - .max_uV = 3000000, - }, - .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con), - .consumer_supplies = stargate2_sensor_3_con, - }, - [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/ - .constraints = { - .name = "vcc_pxa_pll", - .min_uV = 1170000, - .max_uV = 1430000, - }, - }, - [vcc_pxa_usim] = { - .constraints = { /* default 1.8V */ - .name = "vcc_pxa_usim", - .min_uV = 1710000, - .max_uV = 2160000, - }, - }, - [vcc_pxa_mem] = { - .constraints = { /* default 1.8V */ - .name = "vcc_pxa_mem", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, -}; - -static struct mtd_partition stargate2flash_partitions[] = { - { - .name = "Bootloader", - .size = 0x00040000, - .offset = 0, - .mask_flags = 0, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0x00040000, - .mask_flags = 0 - }, { - .name = "Filesystem", - .size = 0x01DC0000, - .offset = 0x00240000, - .mask_flags = 0 - }, -}; - -static struct resource flash_resources = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct flash_platform_data stargate2_flash_data = { - .map_name = "cfi_probe", - .parts = stargate2flash_partitions, - .nr_parts = ARRAY_SIZE(stargate2flash_partitions), - .name = "PXA27xOnChipROM", - .width = 2, -}; - -static struct platform_device stargate2_flash_device = { - .name = "pxa2xx-flash", - .id = 0, - .dev = { - .platform_data = &stargate2_flash_data, - }, - .resource = &flash_resources, - .num_resources = 1, -}; - -static struct pxa2xx_spi_controller pxa_ssp_master_0_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_controller pxa_ssp_master_1_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_controller pxa_ssp_master_2_info = { - .num_chipselect = 1, -}; - -/* An upcoming kernel change will scrap SFRM usage so these - * drivers have been moved to use GPIOs */ -static struct pxa2xx_spi_chip staccel_chip_info = { - .tx_threshold = 8, - .rx_threshold = 8, - .dma_burst_size = 8, - .timeout = 235, - .gpio_cs = 24, -}; - -static struct pxa2xx_spi_chip cc2420_info = { - .tx_threshold = 8, - .rx_threshold = 8, - .dma_burst_size = 8, - .timeout = 235, - .gpio_cs = 39, -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "lis3l02dq", - .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */ - .bus_num = 1, - .chip_select = 0, - .controller_data = &staccel_chip_info, - .irq = PXA_GPIO_TO_IRQ(96), - }, { - .modalias = "cc2420", - .max_speed_hz = 6500000, - .bus_num = 3, - .chip_select = 0, - .controller_data = &cc2420_info, - }, -}; - -static void sg2_udc_command(int cmd) -{ - switch (cmd) { - case PXA2XX_UDC_CMD_CONNECT: - UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE; - break; - case PXA2XX_UDC_CMD_DISCONNECT: - UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE); - break; - } -} - -static struct i2c_pxa_platform_data i2c_pwr_pdata = { - .fast_mode = 1, -}; - -static struct i2c_pxa_platform_data i2c_pdata = { - .fast_mode = 1, -}; - -static void __init imote2_stargate2_init(void) -{ - - pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config)); - - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - - pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); - pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info); - pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info); - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - - - pxa27x_set_i2c_power_info(&i2c_pwr_pdata); - pxa_set_i2c_info(&i2c_pdata); -} - -#ifdef CONFIG_MACH_INTELMOTE2 -/* As the the imote2 doesn't currently have a conventional SD slot - * there is no option to hotplug cards, making all this rather simple - */ -static int imote2_mci_get_ro(struct device *dev) -{ - return 0; -} - -/* Rather simple case as hotplugging not possible */ -static struct pxamci_platform_data imote2_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */ - .get_ro = imote2_mci_get_ro, -}; - -static struct gpio_led imote2_led_pins[] = { - { - .name = "imote2:red", - .gpio = 103, - .active_low = 1, - }, { - .name = "imote2:green", - .gpio = 104, - .active_low = 1, - }, { - .name = "imote2:blue", - .gpio = 105, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data imote2_led_data = { - .num_leds = ARRAY_SIZE(imote2_led_pins), - .leds = imote2_led_pins, -}; - -static struct platform_device imote2_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &imote2_led_data, - }, -}; - -static struct da903x_subdev_info imote2_da9030_subdevs[] = { - { - .name = "da903x-regulator", - .id = DA9030_ID_LDO2, - .platform_data = &stargate2_ldo_init_data[vcc_bbio], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO3, - .platform_data = &stargate2_ldo_init_data[vcc_bb], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO4, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO5, - .platform_data = &stargate2_ldo_init_data[vcc_cc2420], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO6, - .platform_data = &stargate2_ldo_init_data[vcc_vref], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO7, - .platform_data = &stargate2_ldo_init_data[vcc_sram_ext], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO8, - .platform_data = &stargate2_ldo_init_data[vcc_mica], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO9, - .platform_data = &stargate2_ldo_init_data[vcc_bt], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO10, - .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO11, - .platform_data = &stargate2_ldo_init_data[vcc_sensor_3], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO12, - .platform_data = &stargate2_ldo_init_data[vcc_lcd], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO15, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO17, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim], - }, { - .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */ - .id = DA9030_ID_LDO18, - .platform_data = &stargate2_ldo_init_data[vcc_io], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO19, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem], - }, -}; - -static struct da903x_platform_data imote2_da9030_pdata = { - .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs), - .subdevs = imote2_da9030_subdevs, -}; - -static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = { - { - .type = "da9030", - .addr = 0x49, - .platform_data = &imote2_da9030_pdata, - .irq = PXA_GPIO_TO_IRQ(1), - }, -}; - -static struct i2c_board_info __initdata imote2_i2c_board_info[] = { - { /* UCAM sensor board */ - .type = "max1239", - .addr = 0x35, - }, { /* ITS400 Sensor board only */ - .type = "max1363", - .addr = 0x34, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = PXA_GPIO_TO_IRQ(99), - }, { /* ITS400 Sensor board only */ - .type = "tsl2561", - .addr = 0x49, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = PXA_GPIO_TO_IRQ(99), - }, { /* ITS400 Sensor board only */ - .type = "tmp175", - .addr = 0x4A, - .irq = PXA_GPIO_TO_IRQ(96), - }, { /* IMB400 Multimedia board */ - .type = "wm8940", - .addr = 0x1A, - }, -}; - -static unsigned long imote2_pin_config[] __initdata = { - - /* Button */ - GPIO91_GPIO, - - /* LEDS */ - GPIO103_GPIO, /* red led */ - GPIO104_GPIO, /* green led */ - GPIO105_GPIO, /* blue led */ -}; - -static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = { - .udc_command = sg2_udc_command, -}; - -static struct platform_device imote2_audio_device = { - .name = "imote2-audio", - .id = -1, -}; - -static struct platform_device *imote2_devices[] = { - &stargate2_flash_device, - &imote2_leds, - &sht15, - &imote2_audio_device, -}; - -static void __init imote2_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config)); - - imote2_stargate2_init(); - - gpiod_add_lookup_table(&sht15_gpiod_table); - platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); - - i2c_register_board_info(0, imote2_i2c_board_info, - ARRAY_SIZE(imote2_i2c_board_info)); - i2c_register_board_info(1, imote2_pwr_i2c_board_info, - ARRAY_SIZE(imote2_pwr_i2c_board_info)); - - pxa_set_mci_info(&imote2_mci_platform_data); - pxa_set_udc_info(&imote2_udc_info); -} -#endif - -#ifdef CONFIG_MACH_STARGATE2 - -static unsigned long stargate2_pin_config[] __initdata = { - - GPIO15_nCS_1, /* SRAM */ - /* SMC91x */ - GPIO80_nCS_4, - GPIO40_GPIO, /*cable detect?*/ - - /* Button */ - GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH, - - /* Compact Flash */ - GPIO79_PSKTSEL, - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO85_nPCE_1, - GPIO54_nPCE_2, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - GPIO120_GPIO, /* Buff ctrl */ - GPIO108_GPIO, /* Power ctrl */ - GPIO82_GPIO, /* Reset */ - GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */ - - /* MMC not shared with imote2 */ - GPIO90_GPIO, /* nSD detect */ - GPIO89_GPIO, /* SD_POWER_ENABLE */ - - /* Bluetooth */ - GPIO81_GPIO, /* reset */ -}; - -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = (PXA_CS4_PHYS + 0x300), - .end = (PXA_CS4_PHYS + 0xfffff), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_GPIO_TO_IRQ(40), - .end = PXA_GPIO_TO_IRQ(40), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct smc91x_platdata stargate2_smc91x_info = { - .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT - | SMC91X_NOWAIT | SMC91X_USE_DMA, - .pxa_u16_align4 = true, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &stargate2_smc91x_info, - }, -}; - - -/* - * The card detect interrupt isn't debounced so we delay it by 250ms - * to give the card a chance to fully insert / eject. - */ -static int stargate2_mci_init(struct device *dev, - irq_handler_t stargate2_detect_int, - void *data) -{ - int err; - - err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable"); - if (err) { - printk(KERN_ERR "Can't get the gpio for SD power control"); - goto return_err; - } - gpio_direction_output(SG2_SD_POWER_ENABLE, 0); - - err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect"); - if (err) { - printk(KERN_ERR "Can't get the sd detect gpio"); - goto free_power_en; - } - gpio_direction_input(SG2_GPIO_nSD_DETECT); - - err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), - stargate2_detect_int, - IRQ_TYPE_EDGE_BOTH, - "MMC card detect", - data); - if (err) { - printk(KERN_ERR "can't request MMC card detect IRQ\n"); - goto free_nsd_detect; - } - return 0; - - free_nsd_detect: - gpio_free(SG2_GPIO_nSD_DETECT); - free_power_en: - gpio_free(SG2_SD_POWER_ENABLE); - return_err: - return err; -} - -/** - * stargate2_mci_setpower() - set state of mmc power supply - * - * Very simple control. Either it is on or off and is controlled by - * a gpio pin */ -static int stargate2_mci_setpower(struct device *dev, unsigned int vdd) -{ - gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd); - return 0; -} - -static void stargate2_mci_exit(struct device *dev, void *data) -{ - free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data); - gpio_free(SG2_SD_POWER_ENABLE); - gpio_free(SG2_GPIO_nSD_DETECT); -} - -static struct pxamci_platform_data stargate2_mci_platform_data = { - .detect_delay_ms = 250, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .init = stargate2_mci_init, - .setpower = stargate2_mci_setpower, - .exit = stargate2_mci_exit, -}; - - -/* - * SRAM - The Stargate 2 has 32MB of SRAM. - * - * Here it is made available as an MTD. This will then - * typically have a cifs filesystem created on it to provide - * fast temporary storage. - */ -static struct resource sram_resources = { - .start = PXA_CS1_PHYS, - .end = PXA_CS1_PHYS + SZ_32M-1, - .flags = IORESOURCE_MEM, -}; - -static struct platdata_mtd_ram stargate2_sram_pdata = { - .mapname = "Stargate2 SRAM", - .bankwidth = 2, -}; - -static struct platform_device stargate2_sram = { - .name = "mtd-ram", - .id = 0, - .resource = &sram_resources, - .num_resources = 1, - .dev = { - .platform_data = &stargate2_sram_pdata, - }, -}; - -static struct pcf857x_platform_data platform_data_pcf857x = { - .gpio_base = 128, - .n_latch = 0, - .setup = NULL, - .teardown = NULL, - .context = NULL, -}; - -static const struct property_entry pca9500_eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 4), - { } -}; - -static const struct software_node pca9500_eeprom_node = { - .properties = pca9500_eeprom_properties, -}; - -/** - * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state - **/ -static int stargate2_reset_bluetooth(void) -{ - int err; - err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET"); - if (err) { - printk(KERN_ERR "Could not get gpio for bluetooth reset\n"); - return err; - } - gpio_direction_output(SG2_BT_RESET, 1); - mdelay(5); - /* now reset it - 5 msec minimum */ - gpio_set_value(SG2_BT_RESET, 0); - mdelay(10); - gpio_set_value(SG2_BT_RESET, 1); - gpio_free(SG2_BT_RESET); - return 0; -} - -static struct led_info stargate2_leds[] = { - { - .name = "sg2:red", - .flags = DA9030_LED_RATE_ON, - }, { - .name = "sg2:blue", - .flags = DA9030_LED_RATE_ON, - }, { - .name = "sg2:green", - .flags = DA9030_LED_RATE_ON, - }, -}; - -static struct da903x_subdev_info stargate2_da9030_subdevs[] = { - { - .name = "da903x-led", - .id = DA9030_ID_LED_2, - .platform_data = &stargate2_leds[0], - }, { - .name = "da903x-led", - .id = DA9030_ID_LED_3, - .platform_data = &stargate2_leds[2], - }, { - .name = "da903x-led", - .id = DA9030_ID_LED_4, - .platform_data = &stargate2_leds[1], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO2, - .platform_data = &stargate2_ldo_init_data[vcc_bbio], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO3, - .platform_data = &stargate2_ldo_init_data[vcc_bb], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO4, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO5, - .platform_data = &stargate2_ldo_init_data[vcc_cc2420], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO6, - .platform_data = &stargate2_ldo_init_data[vcc_vref], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO7, - .platform_data = &stargate2_ldo_init_data[vcc_sram_ext], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO8, - .platform_data = &stargate2_ldo_init_data[vcc_mica], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO9, - .platform_data = &stargate2_ldo_init_data[vcc_bt], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO10, - .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO11, - .platform_data = &stargate2_ldo_init_data[vcc_sensor_3], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO12, - .platform_data = &stargate2_ldo_init_data[vcc_lcd], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO15, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO17, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim], - }, { - .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */ - .id = DA9030_ID_LDO18, - .platform_data = &stargate2_ldo_init_data[vcc_io], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO19, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem], - }, -}; - -static struct da903x_platform_data stargate2_da9030_pdata = { - .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs), - .subdevs = stargate2_da9030_subdevs, -}; - -static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = { - { - .type = "da9030", - .addr = 0x49, - .platform_data = &stargate2_da9030_pdata, - .irq = PXA_GPIO_TO_IRQ(1), - }, -}; - -static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { - /* Techically this a pca9500 - but it's compatible with the 8574 - * for gpio expansion and the 24c02 for eeprom access. - */ - { - .type = "pcf8574", - .addr = 0x27, - .platform_data = &platform_data_pcf857x, - }, { - .type = "24c02", - .addr = 0x57, - .swnode = &pca9500_eeprom_node, - }, { - .type = "max1238", - .addr = 0x35, - }, { /* ITS400 Sensor board only */ - .type = "max1363", - .addr = 0x34, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = PXA_GPIO_TO_IRQ(99), - }, { /* ITS400 Sensor board only */ - .type = "tsl2561", - .addr = 0x49, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = PXA_GPIO_TO_IRQ(99), - }, { /* ITS400 Sensor board only */ - .type = "tmp175", - .addr = 0x4A, - .irq = PXA_GPIO_TO_IRQ(96), - }, -}; - -/* Board doesn't support cable detection - so always lie and say - * something is there. - */ -static int sg2_udc_detect(void) -{ - return 1; -} - -static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = { - .udc_is_connected = sg2_udc_detect, - .udc_command = sg2_udc_command, -}; - -static struct platform_device *stargate2_devices[] = { - &stargate2_flash_device, - &stargate2_sram, - &smc91x_device, - &sht15, -}; - -static void __init stargate2_init(void) -{ - /* This is probably a board specific hack as this must be set - prior to connecting the MFP stuff up. */ - __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR); - - pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config)); - - imote2_stargate2_init(); - - gpiod_add_lookup_table(&sht15_gpiod_table); - platform_add_devices(ARRAY_AND_SIZE(stargate2_devices)); - - i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info)); - i2c_register_board_info(1, stargate2_pwr_i2c_board_info, - ARRAY_SIZE(stargate2_pwr_i2c_board_info)); - - pxa_set_mci_info(&stargate2_mci_platform_data); - - pxa_set_udc_info(&stargate2_udc_info); - - stargate2_reset_bluetooth(); -} -#endif - -#ifdef CONFIG_MACH_INTELMOTE2 -MACHINE_START(INTELMOTE2, "IMOTE 2") - .map_io = pxa27x_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = imote2_init, - .atag_offset = 0x100, - .restart = pxa_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_STARGATE2 -MACHINE_START(STARGATE2, "Stargate 2") - .map_io = pxa27x_map_io, - .nr_irqs = STARGATE_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = stargate2_init, - .atag_offset = 0x100, - .restart = pxa_restart, -MACHINE_END -#endif diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index ab53eab635f6..2ce261cfff8e 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -210,7 +210,7 @@ config PCMCIA_PXA2XX depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ - || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \ + || ARCOM_PCMCIA || ARCH_PXA_ESERIES \ || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \ || MACH_COLIBRI320 || MACH_H4700) select PCMCIA_SOC_COMMON diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 2d5657cfc49c..c43267b18f55 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -56,7 +56,6 @@ pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o -pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += pxa2xx_colibri.o diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c deleted file mode 100644 index 6efb7f814b4a..000000000000 --- a/drivers/pcmcia/pxa2xx_stargate2.c +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/drivers/pcmcia/pxa2xx_stargate2.c - * - * Stargate 2 PCMCIA specific routines. - * - * Created: December 6, 2005 - * Author: Ed C. Epp - * Copyright: Intel Corp 2005 - * Jonathan Cameron 2009 - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include "soc_common.h" - -#define SG2_S0_POWER_CTL 108 -#define SG2_S0_GPIO_RESET 82 -#define SG2_S0_GPIO_DETECT 53 -#define SG2_S0_GPIO_READY 81 - -static struct gpio sg2_pcmcia_gpios[] = { - { SG2_S0_GPIO_RESET, GPIOF_OUT_INIT_HIGH, "PCMCIA Reset" }, - { SG2_S0_POWER_CTL, GPIOF_OUT_INIT_HIGH, "PCMCIA Power Ctrl" }, -}; - -static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt) -{ - skt->stat[SOC_STAT_CD].gpio = SG2_S0_GPIO_DETECT; - skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD"; - skt->stat[SOC_STAT_RDY].gpio = SG2_S0_GPIO_READY; - skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY"; - return 0; -} - -static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt, - struct pcmcia_state *state) -{ - state->bvd1 = 0; /* not available - battery detect on card */ - state->bvd2 = 0; /* not available */ - state->vs_3v = 1; /* not available - voltage detect for card */ - state->vs_Xv = 0; /* not available */ -} - -static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, - const socket_state_t *state) -{ - /* Enable card power */ - switch (state->Vcc) { - case 0: - /* sets power ctl register high */ - gpio_set_value(SG2_S0_POWER_CTL, 1); - break; - case 33: - case 50: - /* sets power control register low (clear) */ - gpio_set_value(SG2_S0_POWER_CTL, 0); - msleep(100); - break; - default: - pr_err("%s(): bad Vcc %u\n", - __func__, state->Vcc); - return -1; - } - - /* reset */ - gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET)); - - return 0; -} - -static struct pcmcia_low_level sg2_pcmcia_ops __initdata = { - .owner = THIS_MODULE, - .hw_init = sg2_pcmcia_hw_init, - .socket_state = sg2_pcmcia_socket_state, - .configure_socket = sg2_pcmcia_configure_socket, - .nr = 1, -}; - -static struct platform_device *sg2_pcmcia_device; - -static int __init sg2_pcmcia_init(void) -{ - int ret; - - if (!machine_is_stargate2()) - return -ENODEV; - - sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); - if (!sg2_pcmcia_device) - return -ENOMEM; - - ret = gpio_request_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios)); - if (ret) - goto error_put_platform_device; - - ret = platform_device_add_data(sg2_pcmcia_device, - &sg2_pcmcia_ops, - sizeof(sg2_pcmcia_ops)); - if (ret) - goto error_free_gpios; - - ret = platform_device_add(sg2_pcmcia_device); - if (ret) - goto error_free_gpios; - - return 0; -error_free_gpios: - gpio_free_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios)); -error_put_platform_device: - platform_device_put(sg2_pcmcia_device); - - return ret; -} - -static void __exit sg2_pcmcia_exit(void) -{ - platform_device_unregister(sg2_pcmcia_device); - gpio_free_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios)); -} - -fs_initcall(sg2_pcmcia_init); -module_exit(sg2_pcmcia_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:pxa2xx-pcmcia"); diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 9d40e8a206d1..cecbec2a09d7 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -220,15 +220,6 @@ config SND_PXA2XX_SOC_MIOA701 Say Y if you want to add support for SoC audio on the MIO A701. -config SND_PXA2XX_SOC_IMOTE2 - tristate "SoC Audio support for IMote 2" - depends on SND_PXA2XX_SOC && MACH_INTELMOTE2 && I2C - select SND_PXA2XX_SOC_I2S - select SND_SOC_WM8940 - help - Say Y if you want to add support for SoC audio on the - IMote 2. - config SND_MMP_SOC_BROWNSTONE tristate "SoC Audio support for Marvell Brownstone" depends on SND_MMP_SOC_SSPA && MACH_BROWNSTONE && I2C diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index ea4929d73318..b712eb894a61 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -29,7 +29,6 @@ snd-soc-hx4700-objs := hx4700.o snd-soc-magician-objs := magician.o snd-soc-mioa701-objs := mioa701_wm9713.o snd-soc-z2-objs := z2.o -snd-soc-imote2-objs := imote2.o snd-soc-brownstone-objs := brownstone.o snd-soc-ttc-dkb-objs := ttc-dkb.o @@ -47,6 +46,5 @@ obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o -obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o obj-$(CONFIG_SND_MMP_SOC_BROWNSTONE) += snd-soc-brownstone.o obj-$(CONFIG_SND_SOC_TTC_DKB) += snd-soc-ttc-dkb.o diff --git a/sound/soc/pxa/imote2.c b/sound/soc/pxa/imote2.c deleted file mode 100644 index a575676508b3..000000000000 --- a/sound/soc/pxa/imote2.c +++ /dev/null @@ -1,99 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include - -#include - -#include "../codecs/wm8940.h" -#include "pxa2xx-i2s.h" - -static int imote2_asoc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); - struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); - unsigned int clk = 0; - int ret; - - switch (params_rate(params)) { - case 8000: - case 16000: - case 48000: - case 96000: - clk = 12288000; - break; - case 11025: - case 22050: - case 44100: - clk = 11289600; - break; - } - - ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk, - SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* set the I2S system clock as input (unused) */ - ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, clk, - SND_SOC_CLOCK_OUT); - - return ret; -} - -static const struct snd_soc_ops imote2_asoc_ops = { - .hw_params = imote2_asoc_hw_params, -}; - -SND_SOC_DAILINK_DEFS(wm8940, - DAILINK_COMP_ARRAY(COMP_CPU("pxa2xx-i2s")), - DAILINK_COMP_ARRAY(COMP_CODEC("wm8940-codec.0-0034", - "wm8940-hifi")), - DAILINK_COMP_ARRAY(COMP_PLATFORM("pxa-pcm-audio"))); - -static struct snd_soc_dai_link imote2_dai = { - .name = "WM8940", - .stream_name = "WM8940", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS, - .ops = &imote2_asoc_ops, - SND_SOC_DAILINK_REG(wm8940), -}; - -static struct snd_soc_card imote2 = { - .name = "Imote2", - .owner = THIS_MODULE, - .dai_link = &imote2_dai, - .num_links = 1, -}; - -static int imote2_probe(struct platform_device *pdev) -{ - struct snd_soc_card *card = &imote2; - int ret; - - card->dev = &pdev->dev; - - ret = devm_snd_soc_register_card(&pdev->dev, card); - if (ret) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", - ret); - return ret; -} - -static struct platform_driver imote2_driver = { - .driver = { - .name = "imote2-audio", - .pm = &snd_soc_pm_ops, - }, - .probe = imote2_probe, -}; - -module_platform_driver(imote2_driver); - -MODULE_AUTHOR("Jonathan Cameron"); -MODULE_DESCRIPTION("ALSA SoC Imote 2"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:imote2-audio"); -- 2.11.0