From 2eb6b51822ab1c3b7e8b62564ba86fed6c629297 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 9 Dec 2013 15:31:17 -0700 Subject: [PATCH] staging: comedi: pcmmio: setup irq routing during (*attach) To use interrupts the IRQ routing must be configured and interrupts enabled. Currently both steps are being handled in pcmmio_start_intr(). Move the code that sets the IRQ routing into the attach of the board. At this point interrupts are still disabled. The enable and polarity bits just need to be set in pcmmio_start_intr() to enable them. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/pcmmio.c | 40 +++++++++++++++------------------ 1 file changed, 18 insertions(+), 22 deletions(-) diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c index a5b81ef2771f..f61f9ced5d8f 100644 --- a/drivers/staging/comedi/drivers/pcmmio.c +++ b/drivers/staging/comedi/drivers/pcmmio.c @@ -90,6 +90,8 @@ Configuration Options: #define PCMMIO_AI_CMD_ODD_CHAN (1 << 6) #define PCMMIO_AI_CMD_CHAN_SEL(x) (((x) & 0x3) << 4) #define PCMMIO_AI_CMD_RANGE(x) (((x) & 0x3) << 2) +#define PCMMIO_RESOURCE_REG 0x02 +#define PCMMIO_RESOURCE_IRQ(x) (((x) & 0xf) << 0) #define PCMMIO_AI_STATUS_REG 0x03 #define PCMMIO_AI_STATUS_DATA_READY (1 << 7) #define PCMMIO_AI_STATUS_DATA_DMA_PEND (1 << 6) @@ -99,7 +101,10 @@ Configuration Options: #define PCMMIO_AI_STATUS_REG_SEL (1 << 3) #define PCMMIO_AI_STATUS_CMD_DRQ_ENA (1 << 1) #define PCMMIO_AI_STATUS_IRQ_ENA (1 << 0) -#define PCMMIO_AI_RESOURCE_REG 0x03 +#define PCMMIO_AI_RES_ENA_REG 0x03 +#define PCMMIO_AI_RES_ENA_CMD_REG_ACCESS (0 << 3) +#define PCMMIO_AI_RES_ENA_AI_RES_ACCESS (1 << 3) +#define PCMMIO_AI_RES_ENA_DIO_RES_ACCESS (1 << 4) #define PCMMIO_AI_2ND_ADC_OFFSET 0x04 #define PCMMIO_AO_LSB_REG 0x08 @@ -462,23 +467,6 @@ static int pcmmio_start_intr(struct comedi_device *dev, bits &= ((0x1 << 24) - 1) << 0; devpriv->enabled_mask = bits; - { - /* - * the below code configures the board - * to use a specific IRQ from 0-15. - */ - unsigned char b; - /* - * set resource enable register - * to enable IRQ operation - */ - outb(1 << 4, dev->iobase + 3); - /* set bits 0-3 of b to the irq number from 0-15 */ - b = dev->irq & ((1 << 4) - 1); - outb(b, dev->iobase + 2); - /* done, we told the board what irq to use */ - } - switch_page(dev, PCMMIO_PAGE_ENAB); for (port = firstport; port < firstport + nports; ++port) { unsigned enab, pol; @@ -814,8 +802,15 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (it->options[1]) { ret = request_irq(it->options[1], interrupt_pcmmio, 0, dev->board_name, dev); - if (ret == 0) + if (ret == 0) { dev->irq = it->options[1]; + + /* configure the interrupt routing on the board */ + outb(PCMMIO_AI_RES_ENA_DIO_RES_ACCESS, + dev->iobase + PCMMIO_AI_RES_ENA_REG); + outb(PCMMIO_RESOURCE_IRQ(dev->irq), + dev->iobase + PCMMIO_RESOURCE_REG); + } } ret = comedi_alloc_subdevices(dev, 4); @@ -832,9 +827,10 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it) s->insn_read = pcmmio_ai_insn_read; /* initialize the resource enable register by clearing it */ - outb(0, dev->iobase + PCMMIO_AI_RESOURCE_REG); - outb(0, - dev->iobase + PCMMIO_AI_2ND_ADC_OFFSET + PCMMIO_AI_RESOURCE_REG); + outb(PCMMIO_AI_RES_ENA_CMD_REG_ACCESS, + dev->iobase + PCMMIO_AI_RES_ENA_REG); + outb(PCMMIO_AI_RES_ENA_CMD_REG_ACCESS, + dev->iobase + PCMMIO_AI_RES_ENA_REG + PCMMIO_AI_2ND_ADC_OFFSET); /* Analog Output subdevice */ s = &dev->subdevices[1]; -- 2.11.0