From 32b45065766b7421db2264a3ab7564c046a46d4d Mon Sep 17 00:00:00 2001 From: Roland Vossen Date: Wed, 1 Jun 2011 13:46:03 +0200 Subject: [PATCH] staging: brcm80211: removed unused definitions from include/soc.h Code cleanup. Signed-off-by: Roland Vossen Reviewed-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/include/soc.h | 100 -------------------------------- 1 file changed, 100 deletions(-) diff --git a/drivers/staging/brcm80211/include/soc.h b/drivers/staging/brcm80211/include/soc.h index ccbd58f4e284..3e593778b831 100644 --- a/drivers/staging/brcm80211/include/soc.h +++ b/drivers/staging/brcm80211/include/soc.h @@ -17,54 +17,12 @@ #ifndef _BRCM_SOC_H #define _BRCM_SOC_H -/* - * SOC Interconnect Address Map. - * All regions may not exist on all chips. - */ -#define SI_SDRAM_BASE 0x00000000 /* Physical SDRAM */ -#define SI_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */ -#define SI_PCI_MEM_SZ (64 * 1024 * 1024) -#define SI_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */ -#define SI_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -#define SI_SDRAM_R2 0x80000000 /* Region 2 for sdram (512 MB) */ - #ifdef SI_ENUM_BASE_VARIABLE #define SI_ENUM_BASE (sii->pub.si_enum_base) #else #define SI_ENUM_BASE 0x18000000 /* Enumeration space base */ #endif /* SI_ENUM_BASE_VARIABLE */ -#define SI_WRAP_BASE 0x18100000 /* Wrapper space base */ -#define SI_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ -#define SI_MAXCORES 16 /* Max cores (this is arbitrary, for software - * convenience and could be changed if we - * make any larger chips - */ - -#define SI_FASTRAM 0x19000000 /* On-chip RAM on chips that also have DDR */ -#define SI_FASTRAM_SWAPPED 0x19800000 - -#define SI_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ -#define SI_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ -#define SI_ARMCM3_ROM 0x1e000000 /* ARM Cortex-M3 ROM */ -#define SI_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ -#define SI_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ -#define SI_ARM7S_ROM 0x20000000 /* ARM7TDMI-S ROM */ -#define SI_ARMCM3_SRAM2 0x60000000 /* ARM Cortex-M3 SRAM Region 2 */ -#define SI_ARM7S_SRAM2 0x80000000 /* ARM7TDMI-S SRAM Region 2 */ -#define SI_ARM_FLASH1 0xffff0000 /* ARM Flash Region 1 */ -#define SI_ARM_FLASH1_SZ 0x00010000 /* ARM Size of Flash Region 1 */ - -#define SI_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */ -#define SI_PCI_DMA2 0x80000000 /* Client Mode sb2pcitranslation2 (1 GB) */ -#define SI_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ -#define SI_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 - * (2 ZettaBytes), low 32 bits - */ -#define SI_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 - * (2 ZettaBytes), high 32 bits - */ - /* core codes */ #define NODEV_CORE_ID 0x700 /* Invalid coreid */ #define CC_CORE_ID 0x800 /* chipcommon core */ @@ -127,14 +85,6 @@ * unused address ranges */ -/* There are TWO constants on all Broadcom chips: SI_ENUM_BASE above, - * and chipcommon being the first core: - */ -#define SI_CC_IDX 0 - -/* SOC Interconnect types (aka chip types) */ -#define SOCI_AI 1 - /* Common core control flags */ #define SICF_BIST_EN 0x8000 #define SICF_PME_EN 0x4000 @@ -142,54 +92,4 @@ #define SICF_FGC 0x0002 #define SICF_CLOCK_EN 0x0001 -/* Common core status flags */ -#define SISF_BIST_DONE 0x8000 -#define SISF_BIST_ERROR 0x4000 -#define SISF_GATED_CLK 0x2000 -#define SISF_DMA64 0x1000 -#define SISF_CORE_BITS 0x0fff - -/* A register that is common to all cores to - * communicate w/PMU regarding clock control. - */ -#define SI_CLK_CTL_ST 0x1e0 /* clock control and status */ - -/* clk_ctl_st register */ -#define CCS_FORCEALP 0x00000001 /* force ALP request */ -#define CCS_FORCEHT 0x00000002 /* force HT request */ -#define CCS_FORCEILP 0x00000004 /* force ILP request */ -#define CCS_ALPAREQ 0x00000008 /* ALP Avail Request */ -#define CCS_HTAREQ 0x00000010 /* HT Avail Request */ -#define CCS_FORCEHWREQOFF 0x00000020 /* Force HW Clock Request Off */ -#define CCS_ERSRC_REQ_MASK 0x00000700 /* external resource requests */ -#define CCS_ERSRC_REQ_SHIFT 8 -#define CCS_ALPAVAIL 0x00010000 /* ALP is available */ -#define CCS_HTAVAIL 0x00020000 /* HT is available */ -#define CCS_BP_ON_APL 0x00040000 /* RO: Backplane is running on ALP clock */ -#define CCS_BP_ON_HT 0x00080000 /* RO: Backplane is running on HT clock */ -#define CCS_ERSRC_STS_MASK 0x07000000 /* external resource status */ -#define CCS_ERSRC_STS_SHIFT 24 - -#define CCS0_HTAVAIL 0x00010000 /* HT avail in chipc and pcmcia on 4328a0 */ -#define CCS0_ALPAVAIL 0x00020000 /* ALP avail in chipc and pcmcia on 4328a0 */ - -/* Not really related to SOC Interconnect, but a couple of software - * conventions for the use the flash space: - */ - -/* Minimum amount of flash we support */ -#define FLASH_MIN 0x00020000 /* Minimum flash size */ - -/* A boot/binary may have an embedded block that describes its size */ -#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ -#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */ -#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ -#define BISZ_TXTST_IDX 1 /* 1: text start */ -#define BISZ_TXTEND_IDX 2 /* 2: text end */ -#define BISZ_DATAST_IDX 3 /* 3: data start */ -#define BISZ_DATAEND_IDX 4 /* 4: data end */ -#define BISZ_BSSST_IDX 5 /* 5: bss start */ -#define BISZ_BSSEND_IDX 6 /* 6: bss end */ -#define BISZ_SIZE 7 /* descriptor size in 32-bit integers */ - #endif /* _BRCM_SOC_H */ -- 2.11.0