From 36a4df5003c91663bd2d68a3cf452c0495ce583c Mon Sep 17 00:00:00 2001 From: Cosmin Tanislav Date: Fri, 21 Oct 2022 13:41:14 +0300 Subject: [PATCH] dt-bindings: iio: adc: add AD4130 AD4130-8 is an ultra-low power, high precision, measurement solution for low bandwidth battery operated applications. The fully integrated AFE (Analog Front-End) includes a multiplexer for up to 16 single-ended or 8 differential inputs, PGA (Programmable Gain Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator, selectable filter options, smart sequencer, sensor biasing and excitation options, diagnostics, and a FIFO buffer. Signed-off-by: Cosmin Tanislav Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20221021104115.1812486-2-demonsingur@gmail.com Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/adc/adi,ad4130.yaml | 259 +++++++++++++++++++++ MAINTAINERS | 7 + 2 files changed, 266 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml new file mode 100644 index 000000000000..28ebd38b9db4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4130 ADC device driver + +maintainers: + - Cosmin Tanislav + +description: | + Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf + +properties: + compatible: + enum: + - adi,ad4130 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the master clock (mclk) + + clock-names: + items: + - const: mclk + + interrupts: + maxItems: 1 + + interrupt-names: + description: | + Specify which interrupt pin should be configured as Data Ready / FIFO + interrupt. + Default if not supplied is int. + enum: + - int + - clk + - p2 + - dout + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#clock-cells': + const: 0 + + clock-output-names: + maxItems: 1 + + refin1-supply: + description: refin1 supply. Can be used as reference for conversion. + + refin2-supply: + description: refin2 supply. Can be used as reference for conversion. + + avdd-supply: + description: AVDD voltage supply. Can be used as reference for conversion. + + iovdd-supply: + description: IOVDD voltage supply. Used for the chip interface. + + spi-max-frequency: + maximum: 5000000 + + adi,ext-clk-freq-hz: + description: Specify the frequency of the external clock. + enum: [76800, 153600] + default: 76800 + + adi,bipolar: + description: Specify if the device should be used in bipolar mode. + type: boolean + + adi,vbias-pins: + description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 16 + items: + minimum: 0 + maximum: 15 + +required: + - compatible + - reg + - interrupts + +patternProperties: + "^channel@([0-9a-f])$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + description: The channel number. + minimum: 0 + maximum: 15 + + diff-channels: + description: | + Besides the analog inputs available, internal inputs can be used. + 16: Internal temperature sensor. + 17: AVSS + 18: Internal reference + 19: DGND + 20: (AVDD − AVSS)/6+ + 21: (AVDD − AVSS)/6- + 22: (IOVDD − DGND)/6+ + 23: (IOVDD − DGND)/6- + 24: (ALDO − AVSS)/6+ + 25: (ALDO − AVSS)/6- + 26: (DLDO − DGND)/6+ + 27: (DLDO − DGND)/6- + 28: V_MV_P + 29: V_MV_M + items: + minimum: 0 + maximum: 29 + + adi,reference-select: + description: | + Select the reference source to use when converting on the + specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−) + 1: REFIN2(+)/REFIN2(−) + 2: REFOUT/AVSS (Internal reference) + 3: AVDD/AVSS + If not specified, REFIN1 is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + + adi,excitation-pin-0: + description: | + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + + adi,excitation-pin-1: + description: | + Analog input to apply excitation current to while this channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + + adi,excitation-current-0-nanoamp: + description: | + Excitation current in nanoamps to be applied to pin specified in + adi,excitation-pin-0 while this channel is active. + enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000] + default: 0 + + adi,excitation-current-1-nanoamp: + description: | + Excitation current in nanoamps to be applied to pin specified in + adi,excitation-pin-1 while this channel is active. + enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000] + default: 0 + + adi,burnout-current-nanoamp: + description: | + Burnout current in nanoamps to be applied for this channel. + enum: [0, 500, 2000, 4000] + default: 0 + + adi,buffered-positive: + description: Enable buffered mode for positive input. + type: boolean + + adi,buffered-negative: + description: Enable buffered mode for negative input. + type: boolean + + required: + - reg + - diff-channels + +additionalProperties: false + +examples: + - | + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4130"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + spi-max-frequency = <5000000>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + channel@0 { + reg = <0>; + + adi,reference-select = <2>; + + /* AIN8, AIN9 */ + diff-channels = <8 9>; + }; + + channel@1 { + reg = <1>; + + adi,reference-select = <2>; + + /* AIN10, AIN11 */ + diff-channels = <10 11>; + }; + + channel@2 { + reg = <2>; + + adi,reference-select = <2>; + + /* Temperature Sensor, DGND */ + diff-channels = <16 19>; + }; + + channel@3 { + reg = <3>; + + adi,reference-select = <2>; + + /* Internal reference, DGND */ + diff-channels = <18 19>; + }; + + channel@4 { + reg = <4>; + + adi,reference-select = <2>; + + /* DGND, DGND */ + diff-channels = <19 19>; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 379945f82a64..5cb67803af96 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1117,6 +1117,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git F: drivers/net/amt.c +ANALOG DEVICES INC AD4130 DRIVER +M: Cosmin Tanislav +L: linux-iio@vger.kernel.org +S: Supported +W: http://ez.analog.com/community/linux-device-drivers +F: Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml + ANALOG DEVICES INC AD7192 DRIVER M: Alexandru Tachici L: linux-iio@vger.kernel.org -- 2.11.0