From 36e4f839de59b6216a16cdf5c1d3263f4dbd9421 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 11 Jun 2015 17:37:06 -0700 Subject: [PATCH] regulator: Add input current limit support Some regulators can limit their input current (typically annotated as ilim). Add an op (set_input_current_limit) and a DT property + constraint to support this. Signed-off-by: Stephen Boyd Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 1 + drivers/regulator/core.c | 9 +++++++++ drivers/regulator/of_regulator.c | 4 ++++ include/linux/regulator/driver.h | 3 +++ include/linux/regulator/machine.h | 2 ++ 5 files changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 4b1df61ccbd7..e29db73e55f4 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -7,6 +7,7 @@ Optional properties: - regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops - regulator-min-microamp: smallest current consumers may set - regulator-max-microamp: largest current consumers may set +- regulator-input-current-limit-microamp: maximum input current regulator allows - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - regulator-allow-bypass: allow the regulator to go into bypass mode diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6dfb2d6c19ae..ba565416d1d0 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1008,6 +1008,15 @@ static int set_machine_constraints(struct regulator_dev *rdev, if (ret != 0) goto out; + if (rdev->constraints->ilim_uA && ops->set_input_current_limit) { + ret = ops->set_input_current_limit(rdev, + rdev->constraints->ilim_uA); + if (ret < 0) { + rdev_err(rdev, "failed to set input limit\n"); + goto out; + } + } + /* do we need to setup our suspend state */ if (rdev->constraints->initial_state) { ret = suspend_prepare(rdev, rdev->constraints->initial_state); diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 207da037cd2d..f025c1047d0a 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -58,6 +58,10 @@ static void of_get_regulation_constraints(struct device_node *np, if (!of_property_read_u32(np, "regulator-max-microamp", &pval)) constraints->max_uA = pval; + if (!of_property_read_u32(np, "regulator-input-current-limit-microamp", + &pval)) + constraints->ilim_uA = pval; + /* Current change possible? */ if (constraints->min_uA != constraints->max_uA) constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index e0635d0894aa..125264f8be93 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -91,6 +91,7 @@ struct regulator_linear_range { * @set_current_limit: Configure a limit for a current-limited regulator. * The driver should select the current closest to max_uA. * @get_current_limit: Get the configured limit for a current-limited regulator. + * @set_input_current_limit: Configure an input limit. * * @set_mode: Set the configured operating mode for the regulator. * @get_mode: Get the configured operating mode for the regulator. @@ -145,6 +146,8 @@ struct regulator_ops { int min_uA, int max_uA); int (*get_current_limit) (struct regulator_dev *); + int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); + /* enable/disable regulator */ int (*enable) (struct regulator_dev *); int (*disable) (struct regulator_dev *); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 7f7d0a3fe1e1..85a3b457de51 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -75,6 +75,7 @@ struct regulator_state { * * @min_uA: Smallest current consumers may set. * @max_uA: Largest current consumers may set. + * @ilim_uA: Maximum input current. * @system_load: Load that isn't captured by any consumer requests. * * @valid_modes_mask: Mask of modes which may be configured by consumers. @@ -113,6 +114,7 @@ struct regulation_constraints { /* current output range (inclusive) - for current control */ int min_uA; int max_uA; + int ilim_uA; int system_load; -- 2.11.0