From 425f30cc843c727bc7753a0d33710d1e4a999168 Mon Sep 17 00:00:00 2001 From: Kuogee Hsieh Date: Thu, 9 Sep 2021 12:49:58 -0700 Subject: [PATCH] arm64: dts: qcom: sc7280: fix display port phy reg property Existing display port phy reg property is derived from usb phy which map display port phy pcs to wrong address which cause aux init with wrong address and prevent both dpcd read and write from working. Fix this problem by assigning correct pcs address to display port phy reg property. Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1631216998-10049-1-git-send-email-khsieh@codeaurora.org --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 53a21d086178..1c5e4565e88b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -1258,15 +1258,11 @@ dp_phy: dp-phy@88ea200 { reg = <0 0x088ea200 0 0x200>, <0 0x088ea400 0 0x200>, - <0 0x088eac00 0 0x400>, + <0 0x088eaa00 0 0x200>, <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>, - <0 0x088eaa00 0 0x100>; + <0 0x088ea800 0 0x200>; #phy-cells = <0>; #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; }; }; -- 2.11.0