From 43453b3392c1ecfdd1471383ad42ba926533a722 Mon Sep 17 00:00:00 2001 From: Sujith Date: Wed, 29 Oct 2008 10:14:52 +0530 Subject: [PATCH] ath9k: Remove SM Power Save as it is not supported now Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 7 ------ drivers/net/wireless/ath9k/xmit.c | 45 ++++++--------------------------------- 2 files changed, 6 insertions(+), 46 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 21b572bd39c6..27ed084d85cd 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -415,12 +415,6 @@ int ath_rx_subframe(struct ath_node *an, struct sk_buff *skb, #define WME_AC_VO 3 /* voice */ #define WME_NUM_AC 4 -enum ATH_SM_PWRSAV{ - ATH_SM_ENABLE, - ATH_SM_PWRSAV_STATIC, - ATH_SM_PWRSAV_DYNAMIC, -}; - /* * Data transmit queue state. One of these exists for each * hardware transmit queue. Packets sent to us from above @@ -619,7 +613,6 @@ struct ath_node { struct ath_softc *an_sc; struct ath_chainmask_sel an_chainmask_sel; struct ath_node_aggr an_aggr; - u8 an_smmode; /* SM Power save mode */ u16 maxampdu; u8 mpdudensity; }; diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 84219bc61f04..4e7108a179fb 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -575,7 +575,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) struct ath_desc *ds = bf->bf_desc; struct ath_desc *lastds = bf->bf_lastbf->bf_desc; struct ath9k_11n_rate_series series[4]; - int i, flags, rtsctsena = 0, dynamic_mimops = 0; + int i, flags, rtsctsena = 0; u32 ctsduration = 0; u8 rix = 0, cix, ctsrate = 0; u32 aggr_limit_with_rts = ah->ah_caps.rts_aggr_limit; @@ -631,18 +631,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) */ if (!rtsctsena) flags = ATH9K_TXDESC_RTSENA; - /* - * For dynamic MIMO PS, RTS needs to precede the first aggregate - * and the second aggregate should have any protection at all. - */ - if (an && an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) { - if (!bf_isaggrburst(bf)) { - flags = ATH9K_TXDESC_RTSENA; - dynamic_mimops = 1; - } else { - flags = 0; - } - } } /* @@ -707,33 +695,14 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) (bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG), bf_isshpreamble(bf)); - if (an && (an->an_smmode == ATH_SM_PWRSAV_STATIC) && - (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG) == 0) { - /* - * When sending to an HT node that has enabled static - * SM/MIMO power save, send at single stream rates but - * use maximum allowed transmit chains per user, - * hardware, regulatory, or country limits for - * better range. - */ + if (bf_isht(bf)) + series[i].ChSel = + ath_chainmask_sel_logic(sc, an); + else series[i].ChSel = sc->sc_tx_chainmask; - } else { - if (bf_isht(bf)) - series[i].ChSel = - ath_chainmask_sel_logic(sc, an); - else - series[i].ChSel = sc->sc_tx_chainmask; - } if (rtsctsena) series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; - - /* - * Set RTS for all rates if node is in dynamic powersave - * mode and we are using dual stream rates. - */ - if (dynamic_mimops && (bf->bf_rcs[i].flags & ATH_RC_DS_FLAG)) - series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; } /* @@ -2520,10 +2489,8 @@ void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq) if (tid->paused) /* check next tid to keep h/w busy */ continue; - if (!(tid->an->an_smmode == ATH_SM_PWRSAV_DYNAMIC) || - ((txq->axq_depth % 2) == 0)) { + if ((txq->axq_depth % 2) == 0) ath_tx_sched_aggr(sc, txq, tid); - } /* * add tid to round-robin queue if more frames -- 2.11.0