From 4504f0e5b5714d9d26b1a80bf1fc133c95830588 Mon Sep 17 00:00:00 2001 From: Wen Gong Date: Fri, 19 Apr 2019 10:28:45 +0300 Subject: [PATCH] ath10k: sdio: workaround firmware UART pin configuration bug On QCA6174 SDIO devices the SDIO interrupt will fail if UART is disabled from ath10k. SDIO firmware enables UART printouts by default. If ath10k will try to enable UART again the firmware will configure it's GPIO line incorrectly and SDIO interrupts won't work anymore. The workaround is to set UART pin again (19 for QCA6174 SDIO) if uart_print is 0. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 10 +++++++++- drivers/net/wireless/ath/ath10k/hw.h | 5 +++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 835b8de92d55..cfd7bb29a1ec 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -2065,8 +2065,16 @@ static int ath10k_init_uart(struct ath10k *ar) return ret; } - if (!uart_print) + if (!uart_print && ar->hw_params.uart_pin_workaround) { + ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, + ar->hw_params.uart_pin); + if (ret) { + ath10k_warn(ar, "failed to set UART TX pin: %d", ret); + return ret; + } + return 0; + } ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, ar->hw_params.uart_pin); if (ret) { diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 71314999aa24..a92fce1bb6f0 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -606,6 +606,11 @@ struct ath10k_hw_params { /* target supporting fw download via diag ce */ bool fw_diag_ce_download; + + /* need to set uart pin if disable uart print, workaround for a + * firmware bug + */ + bool uart_pin_workaround; }; struct htt_rx_desc; -- 2.11.0