From 473f0a763d2c7cd68a6dedf51e7d81e8f58f78ac Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Fri, 7 Sep 2018 23:13:12 +0200 Subject: [PATCH] mt76x0: run vco calibration for each channel configuration According to vendor sdk, vco calibration has to be executed for each channel configuration whereas mcu calibration has to be performed during channel scanning. This patch fixes the mt76x0 monitor mode issue since in that configuration vco calibration was never executed Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Tested-by: Sid Hayn Signed-off-by: Lorenzo Bianconi Signed-off-by: Felix Fietkau --- drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c index af30885b7e5e..1176a288b2c6 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c @@ -757,10 +757,10 @@ __mt76x0_phy_set_channel(struct mt76x0_dev *dev, /* Vendor driver don't do it */ /* mt76x0_phy_set_tx_power(dev, channel, rf_bw_band); */ + mt76x0_vco_cal(dev, channel); if (scan) - mt76x0_vco_cal(dev, channel); + mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1); - mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1); mt76x0_phy_set_chan_pwr(dev, channel); dev->mt76.chandef = *chandef; -- 2.11.0