From 47d37d6f94ccf32d302492f969209930b2411f9e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Jan 2011 15:54:54 +0100 Subject: [PATCH] serial: Add auart driver for i.MX23/28 Signed-off-by: Sascha Hauer --- drivers/serial/Kconfig | 15 + drivers/serial/Makefile | 1 + drivers/serial/mxs-auart.c | 799 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 815 insertions(+) create mode 100644 drivers/serial/mxs-auart.c diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c1df7676a73d..b7a4d81e643d 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1595,4 +1595,19 @@ config SERIAL_PCH_UART This driver is for PCH(Platform controller Hub) UART of Intel EG20T which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. + +config SERIAL_MXS_AUART + depends on ARCH_MXS + tristate "MXS AUART support" + select SERIAL_CORE + help + This driver supports the MXS Application UART (AUART) port. + +config SERIAL_MXS_AUART_CONSOLE + bool "MXS AUART console support" + depends on SERIAL_MXS_AUART=y + select SERIAL_CORE_CONSOLE + help + Enable a MXS AUART port to be the system console. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 8ea92e9c73b0..c8550719de5a 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -92,3 +92,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o +obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o diff --git a/drivers/serial/mxs-auart.c b/drivers/serial/mxs-auart.c new file mode 100644 index 000000000000..6d01ac968103 --- /dev/null +++ b/drivers/serial/mxs-auart.c @@ -0,0 +1,799 @@ +/* + * Freescale STMP37XX/STMP378X Application UART driver + * + * Author: dmitry pervushin + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MXS_AUART_PORTS 5 + +#define AUART_CTRL0 0x00000000 +#define AUART_CTRL0_SET 0x00000004 +#define AUART_CTRL0_CLR 0x00000008 +#define AUART_CTRL0_TOG 0x0000000c +#define AUART_CTRL1 0x00000010 +#define AUART_CTRL1_SET 0x00000014 +#define AUART_CTRL1_CLR 0x00000018 +#define AUART_CTRL1_TOG 0x0000001c +#define AUART_CTRL2 0x00000020 +#define AUART_CTRL2_SET 0x00000024 +#define AUART_CTRL2_CLR 0x00000028 +#define AUART_CTRL2_TOG 0x0000002c +#define AUART_LINECTRL 0x00000030 +#define AUART_LINECTRL_SET 0x00000034 +#define AUART_LINECTRL_CLR 0x00000038 +#define AUART_LINECTRL_TOG 0x0000003c +#define AUART_LINECTRL2 0x00000040 +#define AUART_LINECTRL2_SET 0x00000044 +#define AUART_LINECTRL2_CLR 0x00000048 +#define AUART_LINECTRL2_TOG 0x0000004c +#define AUART_INTR 0x00000050 +#define AUART_INTR_SET 0x00000054 +#define AUART_INTR_CLR 0x00000058 +#define AUART_INTR_TOG 0x0000005c +#define AUART_DATA 0x00000060 +#define AUART_STAT 0x00000070 +#define AUART_DEBUG 0x00000080 +#define AUART_VERSION 0x00000090 +#define AUART_AUTOBAUD 0x000000a0 + +#define AUART_CTRL0_SFTRST (1 << 31) +#define AUART_CTRL0_CLKGATE (1 << 30) + +#define AUART_CTRL2_CTSEN (1 << 15) +#define AUART_CTRL2_RTS (1 << 11) +#define AUART_CTRL2_RXE (1 << 9) +#define AUART_CTRL2_TXE (1 << 8) +#define AUART_CTRL2_UARTEN (1 << 0) + +#define AUART_LINECTRL_BAUD_DIVINT_SHIFT 16 +#define AUART_LINECTRL_BAUD_DIVINT_MASK 0xffff0000 +#define AUART_LINECTRL_BAUD_DIVINT(v) (((v) & 0xffff) << 16) +#define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT 8 +#define AUART_LINECTRL_BAUD_DIVFRAC_MASK 0x00003f00 +#define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8) +#define AUART_LINECTRL_WLEN_MASK 0x00000060 +#define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5) +#define AUART_LINECTRL_FEN (1 << 4) +#define AUART_LINECTRL_STP2 (1 << 3) +#define AUART_LINECTRL_EPS (1 << 2) +#define AUART_LINECTRL_PEN (1 << 1) +#define AUART_LINECTRL_BRK (1 << 0) + +#define AUART_INTR_RTIEN (1 << 22) +#define AUART_INTR_TXIEN (1 << 21) +#define AUART_INTR_RXIEN (1 << 20) +#define AUART_INTR_CTSMIEN (1 << 17) +#define AUART_INTR_RTIS (1 << 6) +#define AUART_INTR_TXIS (1 << 5) +#define AUART_INTR_RXIS (1 << 4) +#define AUART_INTR_CTSMIS (1 << 1) + +#define AUART_STAT_BUSY (1 << 29) +#define AUART_STAT_CTS (1 << 28) +#define AUART_STAT_TXFE (1 << 27) +#define AUART_STAT_TXFF (1 << 25) +#define AUART_STAT_RXFE (1 << 24) +#define AUART_STAT_OERR (1 << 19) +#define AUART_STAT_BERR (1 << 18) +#define AUART_STAT_PERR (1 << 17) +#define AUART_STAT_FERR (1 << 16) + +static struct uart_driver auart_driver; + +struct mxs_auart_port { + struct uart_port port; + + unsigned int flags; + unsigned int ctrl; + + unsigned int irq; + + struct clk *clk; + struct device *dev; +}; + +static void mxs_auart_stop_tx(struct uart_port *u); + +#define to_auart_port(u) container_of(u, struct mxs_auart_port, port) + +static inline void mxs_auart_tx_chars(struct mxs_auart_port *s) +{ + struct circ_buf *xmit = &s->port.state->xmit; + + while (!(readl(s->port.membase + AUART_STAT) & + AUART_STAT_TXFF)) { + if (s->port.x_char) { + s->port.icount.tx++; + writel(s->port.x_char, + s->port.membase + AUART_DATA); + s->port.x_char = 0; + continue; + } + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) { + s->port.icount.tx++; + writel(xmit->buf[xmit->tail], + s->port.membase + AUART_DATA); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + } else + break; + } + if (uart_circ_empty(&(s->port.state->xmit))) + writel(AUART_INTR_TXIEN, + s->port.membase + AUART_INTR_CLR); + else + writel(AUART_INTR_TXIEN, + s->port.membase + AUART_INTR_SET); + + if (uart_tx_stopped(&s->port)) + mxs_auart_stop_tx(&s->port); +} + +static void mxs_auart_rx_char(struct mxs_auart_port *s) +{ + int flag; + u32 stat; + u8 c; + + c = readl(s->port.membase + AUART_DATA); + stat = readl(s->port.membase + AUART_STAT); + + flag = TTY_NORMAL; + s->port.icount.rx++; + + if (stat & AUART_STAT_BERR) { + s->port.icount.brk++; + if (uart_handle_break(&s->port)) + goto out; + } else if (stat & AUART_STAT_PERR) { + s->port.icount.parity++; + } else if (stat & AUART_STAT_FERR) { + s->port.icount.frame++; + } + + /* + * Mask off conditions which should be ingored. + */ + stat &= s->port.read_status_mask; + + if (stat & AUART_STAT_BERR) { + flag = TTY_BREAK; + } else if (stat & AUART_STAT_PERR) + flag = TTY_PARITY; + else if (stat & AUART_STAT_FERR) + flag = TTY_FRAME; + + if (stat & AUART_STAT_OERR) + s->port.icount.overrun++; + + if (uart_handle_sysrq_char(&s->port, c)) + goto out; + + uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag); +out: + writel(stat, s->port.membase + AUART_STAT); +} + +static void mxs_auart_rx_chars(struct mxs_auart_port *s) +{ + struct tty_struct *tty = s->port.state->port.tty; + u32 stat = 0; + + for (;;) { + stat = readl(s->port.membase + AUART_STAT); + if (stat & AUART_STAT_RXFE) + break; + mxs_auart_rx_char(s); + } + + writel(stat, s->port.membase + AUART_STAT); + tty_flip_buffer_push(tty); +} + +static int mxs_auart_request_port(struct uart_port *u) +{ + return 0; +} + +static int mxs_auart_verify_port(struct uart_port *u, + struct serial_struct *ser) +{ + if (u->type != PORT_UNKNOWN && u->type != PORT_IMX) + return -EINVAL; + return 0; +} + +static void mxs_auart_config_port(struct uart_port *u, int flags) +{ +} + +static const char *mxs_auart_type(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + return dev_name(s->dev); +} + +static void mxs_auart_release_port(struct uart_port *u) +{ +} + +static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) +{ + struct mxs_auart_port *s = to_auart_port(u); + + u32 ctrl = readl(u->membase + AUART_CTRL2); + + ctrl &= ~AUART_CTRL2_RTS; + if (mctrl & TIOCM_RTS) + ctrl |= AUART_CTRL2_RTS; + s->ctrl = mctrl; + writel(ctrl, u->membase + AUART_CTRL2); +} + +static u32 mxs_auart_get_mctrl(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + u32 stat = readl(u->membase + AUART_STAT); + int ctrl2 = readl(u->membase + AUART_CTRL2); + u32 mctrl = s->ctrl; + + mctrl &= ~TIOCM_CTS; + if (stat & AUART_STAT_CTS) + mctrl |= TIOCM_CTS; + + if (ctrl2 & AUART_CTRL2_RTS) + mctrl |= TIOCM_RTS; + + return mctrl; +} + +static void mxs_auart_settermios(struct uart_port *u, + struct ktermios *termios, + struct ktermios *old) +{ + u32 bm, ctrl, ctrl2, div; + unsigned int cflag, baud; + + cflag = termios->c_cflag; + + ctrl = AUART_LINECTRL_FEN; + ctrl2 = readl(u->membase + AUART_CTRL2); + + /* byte size */ + switch (cflag & CSIZE) { + case CS5: + bm = 0; + break; + case CS6: + bm = 1; + break; + case CS7: + bm = 2; + break; + case CS8: + bm = 3; + break; + default: + return; + } + + ctrl |= AUART_LINECTRL_WLEN(bm); + + /* parity */ + if (cflag & PARENB) { + ctrl |= AUART_LINECTRL_PEN; + if ((cflag & PARODD) == 0) + ctrl |= AUART_LINECTRL_EPS; + } + + u->read_status_mask = 0; + + if (termios->c_iflag & INPCK) + u->read_status_mask |= AUART_STAT_PERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + u->read_status_mask |= AUART_STAT_BERR; + + /* + * Characters to ignore + */ + u->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + u->ignore_status_mask |= AUART_STAT_PERR; + if (termios->c_iflag & IGNBRK) { + u->ignore_status_mask |= AUART_STAT_BERR; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + u->ignore_status_mask |= AUART_STAT_OERR; + } + + /* + * ignore all characters if CREAD is not set + */ + if (cflag & CREAD) + ctrl2 |= AUART_CTRL2_RXE; + else + ctrl2 &= ~AUART_CTRL2_RXE; + + /* figure out the stop bits requested */ + if (cflag & CSTOPB) + ctrl |= AUART_LINECTRL_STP2; + + /* figure out the hardware flow control settings */ + if (cflag & CRTSCTS) + ctrl2 |= AUART_CTRL2_CTSEN; + else + ctrl2 &= ~AUART_CTRL2_CTSEN; + + /* set baud rate */ + baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); + div = u->uartclk * 32 / baud; + ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F); + ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6); + + writel(ctrl, u->membase + AUART_LINECTRL); + writel(ctrl2, u->membase + AUART_CTRL2); +} + +static irqreturn_t mxs_auart_irq_handle(int irq, void *context) +{ + u32 istatus, istat; + struct mxs_auart_port *s = context; + u32 stat = readl(s->port.membase + AUART_STAT); + + istatus = istat = readl(s->port.membase + AUART_INTR); + + if (istat & AUART_INTR_CTSMIS) { + uart_handle_cts_change(&s->port, stat & AUART_STAT_CTS); + writel(AUART_INTR_CTSMIS, + s->port.membase + AUART_INTR_CLR); + istat &= ~AUART_INTR_CTSMIS; + } + + if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) { + mxs_auart_rx_chars(s); + istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS); + } + + if (istat & AUART_INTR_TXIS) { + mxs_auart_tx_chars(s); + istat &= ~AUART_INTR_TXIS; + } + + writel(istatus & (AUART_INTR_RTIS + | AUART_INTR_TXIS + | AUART_INTR_RXIS + | AUART_INTR_CTSMIS), + s->port.membase + AUART_INTR_CLR); + + return IRQ_HANDLED; +} + +static void mxs_auart_reset(struct uart_port *u) +{ + int i; + unsigned int reg; + + writel(AUART_CTRL0_SFTRST, u->membase + AUART_CTRL0_CLR); + + for (i = 0; i < 10000; i++) { + reg = readl(u->membase + AUART_CTRL0); + if (!(reg & AUART_CTRL0_SFTRST)) + break; + udelay(3); + } + writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); +} + +static int mxs_auart_startup(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + clk_enable(s->clk); + + writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); + + writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_SET); + + writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, + u->membase + AUART_INTR); + + /* + * Enable fifo so all four bytes of a DMA word are written to + * output (otherwise, only the LSB is written, ie. 1 in 4 bytes) + */ + writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET); + + return 0; +} + +static void mxs_auart_shutdown(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR); + + writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET); + + writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, + u->membase + AUART_INTR_CLR); + + clk_disable(s->clk); +} + +static unsigned int mxs_auart_tx_empty(struct uart_port *u) +{ + if (readl(u->membase + AUART_STAT) & AUART_STAT_TXFE) + return TIOCSER_TEMT; + else + return 0; +} + +static void mxs_auart_start_tx(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + /* enable transmitter */ + writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_SET); + + mxs_auart_tx_chars(s); +} + +static void mxs_auart_stop_tx(struct uart_port *u) +{ + writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_CLR); +} + +static void mxs_auart_stop_rx(struct uart_port *u) +{ + writel(AUART_CTRL2_RXE, u->membase + AUART_CTRL2_CLR); +} + +static void mxs_auart_break_ctl(struct uart_port *u, int ctl) +{ + if (ctl) + writel(AUART_LINECTRL_BRK, + u->membase + AUART_LINECTRL_SET); + else + writel(AUART_LINECTRL_BRK, + u->membase + AUART_LINECTRL_CLR); +} + +static void mxs_auart_enable_ms(struct uart_port *port) +{ + /* just empty */ +} + +static struct uart_ops mxs_auart_ops = { + .tx_empty = mxs_auart_tx_empty, + .start_tx = mxs_auart_start_tx, + .stop_tx = mxs_auart_stop_tx, + .stop_rx = mxs_auart_stop_rx, + .enable_ms = mxs_auart_enable_ms, + .break_ctl = mxs_auart_break_ctl, + .set_mctrl = mxs_auart_set_mctrl, + .get_mctrl = mxs_auart_get_mctrl, + .startup = mxs_auart_startup, + .shutdown = mxs_auart_shutdown, + .set_termios = mxs_auart_settermios, + .type = mxs_auart_type, + .release_port = mxs_auart_release_port, + .request_port = mxs_auart_request_port, + .config_port = mxs_auart_config_port, + .verify_port = mxs_auart_verify_port, +}; + +static struct mxs_auart_port *auart_port[MXS_AUART_PORTS]; + +#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE +static void mxs_auart_console_putchar(struct uart_port *port, int ch) +{ + unsigned int to = 1000; + + while (readl(port->membase + AUART_STAT) & AUART_STAT_TXFF) { + if (!to--) + break; + udelay(1); + } + + writel(ch, port->membase + AUART_DATA); +} + +static void +auart_console_write(struct console *co, const char *str, unsigned int count) +{ + struct mxs_auart_port *s; + struct uart_port *port; + unsigned int old_ctrl0, old_ctrl2; + unsigned int to = 1000; + + if (co->index > MXS_AUART_PORTS || co->index < 0) + return; + + s = auart_port[co->index]; + port = &s->port; + + clk_enable(s->clk); + + /* First save the CR then disable the interrupts */ + old_ctrl2 = readl(port->membase + AUART_CTRL2); + old_ctrl0 = readl(port->membase + AUART_CTRL0); + + writel(AUART_CTRL0_CLKGATE, + port->membase + AUART_CTRL0_CLR); + writel(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE, + port->membase + AUART_CTRL2_SET); + + uart_console_write(port, str, count, mxs_auart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + while (readl(port->membase + AUART_STAT) & AUART_STAT_BUSY) { + if (!to--) + break; + udelay(1); + } + + writel(old_ctrl0, port->membase + AUART_CTRL0); + writel(old_ctrl2, port->membase + AUART_CTRL2); + + clk_disable(s->clk); +} + +static void __init +auart_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + unsigned int lcr_h, quot; + + if (!(readl(port->membase + AUART_CTRL2) & AUART_CTRL2_UARTEN)) + return; + + lcr_h = readl(port->membase + AUART_LINECTRL); + + *parity = 'n'; + if (lcr_h & AUART_LINECTRL_PEN) { + if (lcr_h & AUART_LINECTRL_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2)) + *bits = 7; + else + *bits = 8; + + quot = ((readl(port->membase + AUART_LINECTRL) + & AUART_LINECTRL_BAUD_DIVINT_MASK)) + >> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6); + quot |= ((readl(port->membase + AUART_LINECTRL) + & AUART_LINECTRL_BAUD_DIVFRAC_MASK)) + >> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT; + if (quot == 0) + quot = 1; + + *baud = (port->uartclk << 2) / quot; +} + +static int __init +auart_console_setup(struct console *co, char *options) +{ + struct mxs_auart_port *s; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(auart_port)) + co->index = 0; + s = auart_port[co->index]; + if (!s) + return -ENODEV; + + clk_enable(s->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + auart_console_get_options(&s->port, &baud, &parity, &bits); + + ret = uart_set_options(&s->port, co, baud, parity, bits, flow); + + clk_disable(s->clk); + + return ret; +} + +static struct console auart_console = { + .name = "ttyAPP", + .write = auart_console_write, + .device = uart_console_device, + .setup = auart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &auart_driver, +}; +#endif + +static struct uart_driver auart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyAPP", + .dev_name = "ttyAPP", + .major = 0, + .minor = 0, + .nr = MXS_AUART_PORTS, +#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE + .cons = &auart_console, +#endif +}; + +static int __devinit mxs_auart_probe(struct platform_device *pdev) +{ + struct mxs_auart_port *s; + u32 version; + int ret = 0; + struct resource *r; + + s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL); + if (!s) { + ret = -ENOMEM; + goto out; + } + + s->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(s->clk)) { + ret = PTR_ERR(s->clk); + goto out_free; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + ret = -ENXIO; + goto out_free_clk; + } + + s->port.mapbase = r->start; + s->port.membase = ioremap(r->start, resource_size(r)); + s->port.ops = &mxs_auart_ops; + s->port.iotype = UPIO_MEM; + s->port.line = pdev->id < 0 ? 0 : pdev->id; + s->port.fifosize = 16; + s->port.uartclk = clk_get_rate(s->clk); + s->port.type = PORT_IMX; + s->port.dev = s->dev = get_device(&pdev->dev); + + s->flags = 0; + s->ctrl = 0; + + s->irq = platform_get_irq(pdev, 0); + s->port.irq = s->irq; + ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s); + if (ret) + goto out_free_clk; + + platform_set_drvdata(pdev, s); + + auart_port[pdev->id] = s; + + mxs_auart_reset(&s->port); + + ret = uart_add_one_port(&auart_driver, &s->port); + if (ret) + goto out_free_irq; + + version = readl(s->port.membase + AUART_VERSION); + dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n", + (version >> 24) & 0xff, + (version >> 16) & 0xff, version & 0xffff); + + return 0; + +out_free_irq: + auart_port[pdev->id] = NULL; + free_irq(s->irq, s); +out_free_clk: + clk_put(s->clk); +out_free: + kfree(s); +out: + return ret; +} + +static int __devexit mxs_auart_remove(struct platform_device *pdev) +{ + struct mxs_auart_port *s = platform_get_drvdata(pdev); + + uart_remove_one_port(&auart_driver, &s->port); + + auart_port[pdev->id] = NULL; + + clk_put(s->clk); + free_irq(s->irq, s); + kfree(s); + + return 0; +} + +static struct platform_driver mxs_auart_driver = { + .probe = mxs_auart_probe, + .remove = __devexit_p(mxs_auart_remove), + .driver = { + .name = "mxs-auart", + .owner = THIS_MODULE, + }, +}; + +static int __init mxs_auart_init(void) +{ + int r; + + r = uart_register_driver(&auart_driver); + if (r) + goto out; + + r = platform_driver_register(&mxs_auart_driver); + if (r) + goto out_err; + + return 0; +out_err: + uart_unregister_driver(&auart_driver); +out: + return r; +} + +static void __exit mxs_auart_exit(void) +{ + platform_driver_unregister(&mxs_auart_driver); + uart_unregister_driver(&auart_driver); +} + +module_init(mxs_auart_init); +module_exit(mxs_auart_exit); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Freescale MXS application uart driver"); -- 2.11.0