From 48738831018003c80f1131e77a25b8e832bec6f1 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 9 Aug 2017 08:51:29 +1200 Subject: [PATCH] spi: spi-ep93xx: pass the spi_master pointer around Change the parameters for some of the functions so that the spi_master pointer is passed around instead of the private data ep93xx_spi pointer. This allows removing the 'pdev' member of the private data and will help with some later cleanup. Signed-off-by: H Hartley Sweeten Reviewed-by: Andy Shevchenko Signed-off-by: Chris Packham Signed-off-by: Mark Brown --- drivers/spi/spi-ep93xx.c | 90 ++++++++++++++++++++++++++---------------------- 1 file changed, 49 insertions(+), 41 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 041842e0d028..2d80e36f5015 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -70,7 +70,6 @@ /** * struct ep93xx_spi - EP93xx SPI controller structure - * @pdev: pointer to platform device * @clk: clock for the controller * @mmio: pointer to ioremap()'d registers * @sspdr_phys: physical address of the SSPDR register @@ -90,7 +89,6 @@ * the client */ struct ep93xx_spi { - const struct platform_device *pdev; struct clk *clk; void __iomem *mmio; unsigned long sspdr_phys; @@ -113,15 +111,15 @@ struct ep93xx_spi { /** * ep93xx_spi_calc_divisors() - calculates SPI clock divisors - * @espi: ep93xx SPI controller struct + * @master: SPI master * @rate: desired SPI output clock rate * @div_cpsr: pointer to return the cpsr (pre-scaler) divider * @div_scr: pointer to return the scr divider */ -static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi, +static int ep93xx_spi_calc_divisors(struct spi_master *master, u32 rate, u8 *div_cpsr, u8 *div_scr) { - struct spi_master *master = platform_get_drvdata(espi->pdev); + struct ep93xx_spi *espi = spi_master_get_devdata(master); unsigned long spi_clk_rate = clk_get_rate(espi->clk); int cpsr, scr; @@ -162,17 +160,18 @@ static void ep93xx_spi_cs_control(struct spi_device *spi, bool enable) gpio_set_value(spi->cs_gpio, !enable); } -static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi, +static int ep93xx_spi_chip_setup(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); u8 dss = bits_per_word_to_dss(xfer->bits_per_word); u8 div_cpsr = 0; u8 div_scr = 0; u16 cr0; int err; - err = ep93xx_spi_calc_divisors(espi, xfer->speed_hz, + err = ep93xx_spi_calc_divisors(master, xfer->speed_hz, &div_cpsr, &div_scr); if (err) return err; @@ -181,9 +180,9 @@ static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi, cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT; cr0 |= dss; - dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n", + dev_dbg(&master->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n", spi->mode, div_cpsr, div_scr, dss); - dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0); + dev_dbg(&master->dev, "setup: cr0 %#x\n", cr0); writel(div_cpsr, espi->mmio + SSPCPSR); writel(cr0, espi->mmio + SSPCR0); @@ -234,8 +233,9 @@ static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t) * When this function is finished, RX FIFO should be empty and TX FIFO should be * full. */ -static int ep93xx_spi_read_write(struct ep93xx_spi *espi) +static int ep93xx_spi_read_write(struct spi_master *master) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); struct spi_message *msg = espi->current_msg; struct spi_transfer *t = msg->state; @@ -257,13 +257,15 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi) return -EINPROGRESS; } -static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) +static void ep93xx_spi_pio_transfer(struct spi_master *master) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); + /* * Now everything is set up for the current transfer. We prime the TX * FIFO, enable interrupts, and wait for the transfer to complete. */ - if (ep93xx_spi_read_write(espi)) { + if (ep93xx_spi_read_write(master)) { u32 val; val = readl(espi->mmio + SSPCR1); @@ -276,7 +278,7 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) /** * ep93xx_spi_dma_prepare() - prepares a DMA transfer - * @espi: ep93xx SPI controller struct + * @master: SPI master * @dir: DMA transfer direction * * Function configures the DMA, maps the buffer and prepares the DMA @@ -284,8 +286,10 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) * in case of failure. */ static struct dma_async_tx_descriptor * -ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) +ep93xx_spi_dma_prepare(struct spi_master *master, + enum dma_transfer_direction dir) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); struct spi_transfer *t = espi->current_msg->state; struct dma_async_tx_descriptor *txd; enum dma_slave_buswidth buswidth; @@ -361,7 +365,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) } if (WARN_ON(len)) { - dev_warn(&espi->pdev->dev, "len = %zu expected 0!\n", len); + dev_warn(&master->dev, "len = %zu expected 0!\n", len); return ERR_PTR(-EINVAL); } @@ -379,15 +383,16 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) /** * ep93xx_spi_dma_finish() - finishes with a DMA transfer - * @espi: ep93xx SPI controller struct + * @master: SPI master * @dir: DMA transfer direction * * Function finishes with the DMA transfer. After this, the DMA buffer is * unmapped. */ -static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi, +static void ep93xx_spi_dma_finish(struct spi_master *master, enum dma_transfer_direction dir) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); struct dma_chan *chan; struct sg_table *sgt; @@ -407,22 +412,23 @@ static void ep93xx_spi_dma_callback(void *callback_param) complete(callback_param); } -static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) +static void ep93xx_spi_dma_transfer(struct spi_master *master) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); struct spi_message *msg = espi->current_msg; struct dma_async_tx_descriptor *rxd, *txd; - rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM); + rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM); if (IS_ERR(rxd)) { - dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); + dev_err(&master->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); msg->status = PTR_ERR(rxd); return; } - txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV); + txd = ep93xx_spi_dma_prepare(master, DMA_MEM_TO_DEV); if (IS_ERR(txd)) { - ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); - dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(txd)); + ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM); + dev_err(&master->dev, "DMA TX failed: %ld\n", PTR_ERR(txd)); msg->status = PTR_ERR(txd); return; } @@ -440,13 +446,13 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) wait_for_completion(&espi->wait); - ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV); - ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); + ep93xx_spi_dma_finish(master, DMA_MEM_TO_DEV); + ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM); } /** * ep93xx_spi_process_transfer() - processes one SPI transfer - * @espi: ep93xx SPI controller struct + * @master: SPI master * @msg: current message * @t: transfer to process * @@ -454,17 +460,18 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) * transfer is complete (may sleep) and updates @msg->status based on whether * transfer was successfully processed or not. */ -static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, +static void ep93xx_spi_process_transfer(struct spi_master *master, struct spi_message *msg, struct spi_transfer *t) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); int err; msg->state = t; - err = ep93xx_spi_chip_setup(espi, msg->spi, t); + err = ep93xx_spi_chip_setup(master, msg->spi, t); if (err) { - dev_err(&espi->pdev->dev, + dev_err(&master->dev, "failed to setup chip for transfer\n"); msg->status = err; return; @@ -479,9 +486,9 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, * So in these cases we will be using PIO and don't bother for DMA. */ if (espi->dma_rx && t->len > SPI_FIFO_SIZE) - ep93xx_spi_dma_transfer(espi); + ep93xx_spi_dma_transfer(master); else - ep93xx_spi_pio_transfer(espi); + ep93xx_spi_pio_transfer(master); /* * In case of error during transmit, we bail out from processing @@ -516,7 +523,7 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, /* * ep93xx_spi_process_message() - process one SPI message - * @espi: ep93xx SPI controller struct + * @master: SPI master * @msg: message to process * * This function processes a single SPI message. We go through all transfers in @@ -526,9 +533,10 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, * @msg->status contains %0 in case of success or negative error code in case of * failure. */ -static void ep93xx_spi_process_message(struct ep93xx_spi *espi, +static void ep93xx_spi_process_message(struct spi_master *master, struct spi_message *msg) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); unsigned long timeout; struct spi_transfer *t; @@ -538,7 +546,7 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi, timeout = jiffies + msecs_to_jiffies(SPI_TIMEOUT); while (readl(espi->mmio + SSPSR) & SSPSR_RNE) { if (time_after(jiffies, timeout)) { - dev_warn(&espi->pdev->dev, + dev_warn(&master->dev, "timeout while flushing RX FIFO\n"); msg->status = -ETIMEDOUT; return; @@ -558,7 +566,7 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi, ep93xx_spi_cs_control(msg->spi, true); list_for_each_entry(t, &msg->transfers, transfer_list) { - ep93xx_spi_process_transfer(espi, msg, t); + ep93xx_spi_process_transfer(master, msg, t); if (msg->status) break; } @@ -580,7 +588,7 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master, msg->actual_length = 0; espi->current_msg = msg; - ep93xx_spi_process_message(espi, msg); + ep93xx_spi_process_message(master, msg); espi->current_msg = NULL; spi_finalize_current_message(master); @@ -590,7 +598,8 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master, static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) { - struct ep93xx_spi *espi = dev_id; + struct spi_master *master = dev_id; + struct ep93xx_spi *espi = spi_master_get_devdata(master); u32 val; /* @@ -600,7 +609,7 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) if (readl(espi->mmio + SSPIIR) & SSPIIR_RORIS) { /* clear the overrun interrupt */ writel(0, espi->mmio + SSPICR); - dev_warn(&espi->pdev->dev, + dev_warn(&master->dev, "receive overrun, aborting the message\n"); espi->current_msg->status = -EIO; } else { @@ -608,7 +617,7 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) * Interrupt is either RX (RIS) or TX (TIS). For both cases we * simply execute next data transfer. */ - if (ep93xx_spi_read_write(espi)) { + if (ep93xx_spi_read_write(master)) { /* * In normal case, there still is some processing left * for current transfer. Let's wait for the next @@ -815,7 +824,6 @@ static int ep93xx_spi_probe(struct platform_device *pdev) */ master->max_speed_hz = clk_get_rate(espi->clk) / 2; master->min_speed_hz = clk_get_rate(espi->clk) / (254 * 256); - espi->pdev = pdev; espi->sspdr_phys = res->start + SSPDR; @@ -826,7 +834,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev) } error = devm_request_irq(&pdev->dev, irq, ep93xx_spi_interrupt, - 0, "ep93xx-spi", espi); + 0, "ep93xx-spi", master); if (error) { dev_err(&pdev->dev, "failed to request irq\n"); goto fail_release_master; -- 2.11.0