From 4a07b8bcd503c842bcf0171cdbccdfdac3d985c3 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 5 Dec 2019 10:13:40 +0100 Subject: [PATCH] spi: bitbang: Make chipselect callback optional The ->chipselect() callback on the bit-banged SPI library master is optional if using GPIO descriptors: when using descriptors exclusively without any native chipselects, the core does not even call out the the native ->set_cs() and therefore ->chipselect() on a bit-banged SPI master will not even be called in this case. Make sure to respect the SPI_MASTER_GPIO_SS as used by e.g. spi-gpio.c though: this setting will make the core handle the chip select using GPIO descriptors *AND* call the local chipselect handler. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20191205091340.59850-1-linus.walleij@linaro.org Signed-off-by: Mark Brown --- drivers/spi/spi-bitbang.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index d84e22dd6f9f..68491a8bf7b5 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -329,8 +329,20 @@ static void spi_bitbang_set_cs(struct spi_device *spi, bool enable) int spi_bitbang_init(struct spi_bitbang *bitbang) { struct spi_master *master = bitbang->master; + bool custom_cs; - if (!master || !bitbang->chipselect) + if (!master) + return -EINVAL; + /* + * We only need the chipselect callback if we are actually using it. + * If we just use GPIO descriptors, it is surplus. If the + * SPI_MASTER_GPIO_SS flag is set, we always need to call the + * driver-specific chipselect routine. + */ + custom_cs = (!master->use_gpio_descriptors || + (master->flags & SPI_MASTER_GPIO_SS)); + + if (custom_cs && !bitbang->chipselect) return -EINVAL; mutex_init(&bitbang->lock); @@ -344,7 +356,12 @@ int spi_bitbang_init(struct spi_bitbang *bitbang) master->prepare_transfer_hardware = spi_bitbang_prepare_hardware; master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; master->transfer_one = spi_bitbang_transfer_one; - master->set_cs = spi_bitbang_set_cs; + /* + * When using GPIO descriptors, the ->set_cs() callback doesn't even + * get called unless SPI_MASTER_GPIO_SS is set. + */ + if (custom_cs) + master->set_cs = spi_bitbang_set_cs; if (!bitbang->txrx_bufs) { bitbang->use_dma = 0; -- 2.11.0