From 4a0e8ecca4eeed38d4b3b7a317a3aaab4dd3cacd Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Tue, 14 Sep 2010 14:35:55 +0530 Subject: [PATCH] ath9k_htc: Fix CPU usage issue during scan period The CPU consumption during the scan period is high, since the register write go over Interrupt endpoint. On downloading the firmware to the target, the USB descriptors are 'patched' to change the type of the endpoints from Interrupt to Bulk. With this fix, the CPU usage during a scan run comes down to acceptable levels. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 495f18950ac9..27f88a0a155b 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -92,10 +92,10 @@ static int hif_usb_send_regout(struct hif_device_usb *hif_dev, cmd->skb = skb; cmd->hif_dev = hif_dev; - usb_fill_int_urb(urb, hif_dev->udev, - usb_sndintpipe(hif_dev->udev, USB_REG_OUT_PIPE), + usb_fill_bulk_urb(urb, hif_dev->udev, + usb_sndbulkpipe(hif_dev->udev, USB_REG_OUT_PIPE), skb->data, skb->len, - hif_usb_regout_cb, cmd, 1); + hif_usb_regout_cb, cmd); usb_anchor_urb(urb, &hif_dev->regout_submitted); ret = usb_submit_urb(urb, GFP_KERNEL); @@ -822,7 +822,9 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev) static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev) { - int ret; + int ret, idx; + struct usb_host_interface *alt = &hif_dev->interface->altsetting[0]; + struct usb_endpoint_descriptor *endp; /* Request firmware */ ret = request_firmware(&hif_dev->firmware, hif_dev->fw_name, @@ -850,6 +852,22 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev) goto err_fw_download; } + /* On downloading the firmware to the target, the USB descriptor of EP4 + * is 'patched' to change the type of the endpoint to Bulk. This will + * bring down CPU usage during the scan period. + */ + for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) { + endp = &alt->endpoint[idx].desc; + if (((endp->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) + == 0x04) && + ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT)) { + endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK; + endp->bmAttributes |= USB_ENDPOINT_XFER_BULK; + endp->bInterval = 0; + } + } + return 0; err_fw_download: -- 2.11.0