From 4ac4b5a623f808e64d4d17b14bc23e934eaed008 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Mon, 5 Dec 2016 17:30:25 -0500 Subject: [PATCH] net: dsa: mv88e6xxx: add helper to disable ports Before resetting a switch, the ports should be set to the Disabled state and the transmit queues should be drained. Add an helper to explicit that. Signed-off-by: Vivien Didelot Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 7a6c58783914..7cbaff721318 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2356,17 +2356,11 @@ static void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port) mutex_unlock(&chip->reg_lock); } -static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip) +static int mv88e6xxx_disable_ports(struct mv88e6xxx_chip *chip) { - bool ppu_active = mv88e6xxx_has(chip, MV88E6XXX_FLAG_PPU_ACTIVE); - u16 is_reset = (ppu_active ? 0x8800 : 0xc800); - struct gpio_desc *gpiod = chip->reset; - unsigned long timeout; - u16 reg; - int err; - int i; + int i, err; - /* Set all ports to the disabled state. */ + /* Set all ports to the Disabled state */ for (i = 0; i < mv88e6xxx_num_ports(chip); i++) { err = mv88e6xxx_port_set_state(chip, i, PORT_CONTROL_STATE_DISABLED); @@ -2374,9 +2368,27 @@ static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip) return err; } - /* Wait for transmit queues to drain. */ + /* Wait for transmit queues to drain, + * i.e. 2ms for a maximum frame to be transmitted at 10 Mbps. + */ usleep_range(2000, 4000); + return 0; +} + +static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip) +{ + bool ppu_active = mv88e6xxx_has(chip, MV88E6XXX_FLAG_PPU_ACTIVE); + u16 is_reset = (ppu_active ? 0x8800 : 0xc800); + struct gpio_desc *gpiod = chip->reset; + unsigned long timeout; + u16 reg; + int err; + + err = mv88e6xxx_disable_ports(chip); + if (err) + return err; + /* If there is a gpio connected to the reset pin, toggle it */ if (gpiod) { gpiod_set_value_cansleep(gpiod, 1); -- 2.11.0