From 4d75787b8752cc5113462bc9a3c212ff726928ae Mon Sep 17 00:00:00 2001 From: Dave Gordon Date: Mon, 13 Jun 2016 17:57:34 +0100 Subject: [PATCH] drm/i915/guc: (re)initialise doorbell h/w when enabling GuC submission During a hibernate/resume cycle, the whole system is reset, including the GuC and the doorbell hardware. Then the system is booted up, drivers are loaded, etc -- the GuC firmware may be loaded and set running at this point. But then, the booted kernel is replaced by the hibernated image, and this resumed kernel will also try to reload the GuC firmware (which will fail). To recover, we reset the GuC and try again (which should work). But this GuC reset doesn't also reset the doorbell hardware, so it can be left in a state inconsistent with that assumed by the driver and/or the newly-loaded GuC firmware. It would be better if the GuC reset also cleared all doorbell state, but that's not how the hardware currently works; also, the driver cannot directly reprogram the doorbell hardware (only the GuC can do that). So this patch cycles through all doorbells, assigning and releasing each in turn, so that all the doorbell hardware is left in a consistent state, no matter how it was programmed by the previously-running kernel and/or GuC firmware. v2: don't use kmap_atomic() now that client page 0 is kept mapped. Signed-off-by: Dave Gordon Reviewed-by: Tvrtko Ursulin Signed-off-by: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/1465837054-16245-2-git-send-email-david.s.gordon@intel.com --- drivers/gpu/drm/i915/i915_guc_submission.c | 44 +++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c index a25250570bb5..22a55ac4e51c 100644 --- a/drivers/gpu/drm/i915/i915_guc_submission.c +++ b/drivers/gpu/drm/i915/i915_guc_submission.c @@ -693,6 +693,48 @@ guc_client_free(struct drm_i915_private *dev_priv, kfree(client); } +/* + * Borrow the first client to set up & tear down every doorbell + * in turn, to ensure that all doorbell h/w is (re)initialised. + */ +static void guc_init_doorbell_hw(struct intel_guc *guc) +{ + struct drm_i915_private *dev_priv = guc_to_i915(guc); + struct i915_guc_client *client = guc->execbuf_client; + uint16_t db_id, i; + int err; + + db_id = client->doorbell_id; + + for (i = 0; i < GUC_MAX_DOORBELLS; ++i) { + i915_reg_t drbreg = GEN8_DRBREGL(i); + u32 value = I915_READ(drbreg); + + err = guc_update_doorbell_id(guc, client, i); + + /* Report update failure or unexpectedly active doorbell */ + if (err || (i != db_id && (value & GUC_DOORBELL_ENABLED))) + DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) was 0x%x, err %d\n", + i, drbreg.reg, value, err); + } + + /* Restore to original value */ + err = guc_update_doorbell_id(guc, client, db_id); + if (err) + DRM_ERROR("Failed to restore doorbell to %d, err %d\n", + db_id, err); + + for (i = 0; i < GUC_MAX_DOORBELLS; ++i) { + i915_reg_t drbreg = GEN8_DRBREGL(i); + u32 value = I915_READ(drbreg); + + if (i != db_id && (value & GUC_DOORBELL_ENABLED)) + DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) finally 0x%x\n", + i, drbreg.reg, value); + + } +} + /** * guc_client_alloc() - Allocate an i915_guc_client * @dev_priv: driver private data structure @@ -956,8 +998,8 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv) } guc->execbuf_client = client; - host2guc_sample_forcewake(guc, client); + guc_init_doorbell_hw(guc); return 0; } -- 2.11.0