From 4e4dfcb2a425cccc6dd1fb7d46e060cd57999afc Mon Sep 17 00:00:00 2001 From: Simon Shields Date: Tue, 18 Jun 2019 02:17:42 +0200 Subject: [PATCH] ARM: dts: exynos: Add flash support to Galaxy S3 boards The Galaxy S3 boards use an aat1290 to control the flash LED. Add the relevant device tree configuration to use it. Signed-off-by: Simon Shields Signed-off-by: Denis 'GNUtoo' Carikli [rebase] Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 32 +++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 30eee5942eff..ce87d2ff27aa 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -15,6 +15,24 @@ i2c10 = &i2c_cm36651; }; + aat1290 { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + flash-led { + label = "flash"; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; + }; + lcd_vdd3_reg: voltage-regulator-6 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; @@ -131,6 +149,20 @@ regulator-max-microvolt = <2800000>; }; +&pinctrl_0 { + camera_flash_host: camera-flash-host { + samsung,pins = "gpj1-0"; + samsung,pin-function = ; + samsung,pin-val = <0>; + }; + + camera_flash_isp: camera-flash-isp { + samsung,pins = "gpj1-0"; + samsung,pin-function = ; + samsung,pin-val = <1>; + }; +}; + &s5c73m3 { standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ vdda-supply = <&ldo17_reg>; -- 2.11.0