From 526180408b815aa7b96fd48bd23cdd33ef04e38e Mon Sep 17 00:00:00 2001 From: Kelvin Cao Date: Mon, 10 Dec 2018 17:12:20 +0800 Subject: [PATCH] switchtec: Remove immediate status check after submitting MRPC command After submitting a Firmware Download MRPC command, Switchtec firmware will delay Management EP BAR MemRd TLP responses by more than 10ms. This is a firmware limitation. Delayed MemRd completions are a problem for systems with a low Completion Timeout (CTO). The current driver checks the MRPC status immediately after submitting an MRPC command, which results in a delayed MemRd completion that may cause a Completion Timeout. Remove the immediate status check and rely on the check after receiving an interrupt or timing out. This is only a software workaround to the READ issue and a proper fix of this should be done in firmware. Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver") Signed-off-by: Kelvin Cao Signed-off-by: Wesley Sheng Signed-off-by: Bjorn Helgaas Reviewed-by: Logan Gunthorpe --- drivers/pci/switch/switchtec.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index 54a8b30dda38..d2bca2dd9889 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -134,10 +134,6 @@ static void mrpc_cmd_submit(struct switchtec_dev *stdev) stuser->data, stuser->data_len); iowrite32(stuser->cmd, &stdev->mmio_mrpc->cmd); - stuser->status = ioread32(&stdev->mmio_mrpc->status); - if (stuser->status != SWITCHTEC_MRPC_STATUS_INPROGRESS) - mrpc_complete_cmd(stdev); - schedule_delayed_work(&stdev->mrpc_timeout, msecs_to_jiffies(500)); } -- 2.11.0