From 527ef0550d79e3b3a0ef8f5061072075afef6aaf Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Thu, 1 Dec 2011 11:58:25 +0100 Subject: [PATCH] ARM: Kirkwood: Add configuration for MPP12 as GPIO The MPP12 is listed in the 6281 HW manual as output only but the iconnect board from iomega is using it as GPIO (there's a button connected on it). So, I'm adding a definition for the MPP12 as GPIO. As I've no informations about this and which kirkwood are "affected", I'm adding a new #define instead of modifying the current one for MPP12. Signed-off-by: Arnaud Patard Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/mpp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index ac787957e2d9..e8fda45c0736 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -102,6 +102,7 @@ #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) #define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) -- 2.11.0