From 534126f9d392799d1b593337f05bef7238b4c71b Mon Sep 17 00:00:00 2001 From: Dave Brolley Date: Fri, 21 Jun 2002 21:19:58 +0000 Subject: [PATCH] 2002-06-21 Dave Brolley From Stan Shebs, Jim Blandy, Mark Salter, Kevin Buettner: * config/frv/frv.mt: New file. * config/frv/tm-frv.h: New file. * configure.tgt: Support frv-*-*. * Makefile.in (frv-tdep.o): New target. * frv-tdep.c: New file. * NEWS: Mention frv. --- gdb/ChangeLog | 10 + gdb/Makefile.in | 3 + gdb/NEWS | 2 + gdb/config/frv/frv.mt | 5 + gdb/config/frv/tm-frv.h | 62 +++ gdb/configure.tgt | 1 + gdb/frv-tdep.c | 1174 +++++++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 1257 insertions(+) create mode 100644 gdb/config/frv/frv.mt create mode 100644 gdb/config/frv/tm-frv.h create mode 100644 gdb/frv-tdep.c diff --git a/gdb/ChangeLog b/gdb/ChangeLog index cae0c4fd5b..6f6e419488 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,15 @@ 2002-06-21 Dave Brolley + From Stan Shebs, Jim Blandy, Mark Salter, Kevin Buettner: + * config/frv/frv.mt: New file. + * config/frv/tm-frv.h: New file. + * configure.tgt: Support frv-*-*. + * Makefile.in (frv-tdep.o): New target. + * frv-tdep.c: New file. + * NEWS: Mention frv. + +2002-06-21 Dave Brolley + * MAINTAINERS: Add self to "Write After Approval" list. 2002-06-21 Grace Sainsbury diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 7b353bf74c..30da3c96bb 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -1487,6 +1487,9 @@ findvar.o: findvar.c $(defs_h) $(gdbcore_h) $(inferior_h) $(target_h) \ frame.o: frame.c $(defs_h) $(frame_h) $(target_h) $(value_h) $(inferior_h) \ $(regcache_h) +frv-tdep.o: frv-tdep.c $(defs_h) $(inferior_h) $(symfile_h) $(gdbcore_h) \ + $(arch_utils_h) $(regcache_h) + regcache.o: regcache.c $(defs_h) $(inferior_h) $(target_h) $(regcache_h) fork-child.o: fork-child.c $(gdb_wait_h) $(defs_h) $(gdbcore_h) \ diff --git a/gdb/NEWS b/gdb/NEWS index 95dcf3cab0..2147b01d41 100644 --- a/gdb/NEWS +++ b/gdb/NEWS @@ -41,6 +41,8 @@ National Semiconductor NS32000 (partial) ns32k-*-* * New targets. Atmel AVR avr*-*-* +Fujitsu FRV architecture added by Red Hat frv*-*-* + * New native configurations diff --git a/gdb/config/frv/frv.mt b/gdb/config/frv/frv.mt new file mode 100644 index 0000000000..07fc4e7dd6 --- /dev/null +++ b/gdb/config/frv/frv.mt @@ -0,0 +1,5 @@ +# Target: Fujitsu FRV processor +TDEPFILES= frv-tdep.o +TM_FILE= tm-frv.h +#SIM_OBS = remote-sim.o +#SIM = ../sim/frv/libsim.a diff --git a/gdb/config/frv/tm-frv.h b/gdb/config/frv/tm-frv.h new file mode 100644 index 0000000000..40a2480325 --- /dev/null +++ b/gdb/config/frv/tm-frv.h @@ -0,0 +1,62 @@ +/* Target definitions for the Fujitsu FR-V, for GDB, the GNU Debugger. + Copyright 2000 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +/* This target uses an architecture vector for most architecture methods. */ + +#define GDB_MULTI_ARCH GDB_MULTI_ARCH_PARTIAL + + +#define TARGET_HW_BREAK_LIMIT 4 +#define TARGET_HW_WATCH_LIMIT 4 + +#define TARGET_HAS_HARDWARE_WATCHPOINTS + +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ + frv_check_watch_resources (type, cnt, ot) +extern int frv_check_watch_resources (int type, int cnt, int ot); + +/* When a hardware watchpoint fires off the PC will be left at the + instruction which caused the watchpoint. It will be necessary for + GDB to step over the watchpoint. */ + +/*#define HAVE_STEPPABLE_WATCHPOINT 1*/ + +#define STOPPED_BY_WATCHPOINT(W) \ + ((W).kind == TARGET_WAITKIND_STOPPED \ + && (W).value.sig == TARGET_SIGNAL_TRAP \ + && (frv_stopped_data_address() != ((CORE_ADDR)0))) +extern CORE_ADDR frv_stopped_data_address(void); + +/* Use these macros for watchpoint insertion/deletion. */ +#define target_insert_watchpoint(addr, len, type) \ + remote_insert_watchpoint (addr, len, type) +#define target_remove_watchpoint(addr, len, type) \ + remote_remove_watchpoint (addr, len, type) +#define target_insert_hw_breakpoint(addr, shadow) \ + remote_insert_hw_breakpoint (addr, 1) +#define target_remove_hw_breakpoint(addr, shadow) \ + remote_remove_hw_breakpoint (addr, 1) +#define target_stopped_data_address() frv_stopped_data_address() + +/* These declarations should be in remote.h, no? */ +extern int remote_insert_watchpoint (CORE_ADDR addr, int len, int type); +extern int remote_remove_watchpoint (CORE_ADDR addr, int len, int type); +extern int remote_insert_hw_breakpoint (CORE_ADDR addr, int len); +extern int remote_remove_hw_breakpoint (CORE_ADDR addr, int len); diff --git a/gdb/configure.tgt b/gdb/configure.tgt index 129fa49ee8..02c6581228 100644 --- a/gdb/configure.tgt +++ b/gdb/configure.tgt @@ -74,6 +74,7 @@ h8500-*-*) gdb_target=h8500 ;; fr30-*-elf*) gdb_target=fr30 ;; +frv-*-*) gdb_target=frv ;; hppa*-*-bsd*) gdb_target=hppabsd ;; hppa*-*-pro*) gdb_target=hppapro ;; diff --git a/gdb/frv-tdep.c b/gdb/frv-tdep.c new file mode 100644 index 0000000000..9e0c99ce26 --- /dev/null +++ b/gdb/frv-tdep.c @@ -0,0 +1,1174 @@ +/* Target-dependent code for the Fujitsu FR-V, for GDB, the GNU Debugger. + Copyright 2002 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +#include "defs.h" +#include "inferior.h" +#include "symfile.h" /* for entry_point_address */ +#include "gdbcore.h" +#include "arch-utils.h" +#include "regcache.h" + +extern void _initialize_frv_tdep (void); + +static gdbarch_init_ftype frv_gdbarch_init; + +static gdbarch_register_name_ftype frv_register_name; +static gdbarch_register_raw_size_ftype frv_register_raw_size; +static gdbarch_register_virtual_size_ftype frv_register_virtual_size; +static gdbarch_register_virtual_type_ftype frv_register_virtual_type; +static gdbarch_register_byte_ftype frv_register_byte; +static gdbarch_breakpoint_from_pc_ftype frv_breakpoint_from_pc; +static gdbarch_frame_chain_ftype frv_frame_chain; +static gdbarch_frame_saved_pc_ftype frv_frame_saved_pc; +static gdbarch_skip_prologue_ftype frv_skip_prologue; +static gdbarch_frame_init_saved_regs_ftype frv_frame_init_saved_regs; +static gdbarch_deprecated_extract_return_value_ftype frv_extract_return_value; +static gdbarch_deprecated_extract_struct_value_address_ftype frv_extract_struct_value_address; +static gdbarch_use_struct_convention_ftype frv_use_struct_convention; +static gdbarch_frameless_function_invocation_ftype frv_frameless_function_invocation; +static gdbarch_init_extra_frame_info_ftype stupid_useless_init_extra_frame_info; +static gdbarch_store_return_value_ftype frv_store_return_value; +static gdbarch_store_struct_return_ftype frv_store_struct_return; +static gdbarch_push_arguments_ftype frv_push_arguments; +static gdbarch_push_return_address_ftype frv_push_return_address; +static gdbarch_pop_frame_ftype frv_pop_frame; +static gdbarch_saved_pc_after_call_ftype frv_saved_pc_after_call; + +static void frv_pop_frame_regular (struct frame_info *frame); + +/* Register numbers. You can change these as needed, but don't forget + to update the simulator accordingly. */ +enum { + /* The total number of registers we know exist. */ + frv_num_regs = 147, + + /* Register numbers 0 -- 63 are always reserved for general-purpose + registers. The chip at hand may have less. */ + first_gpr_regnum = 0, + sp_regnum = 1, + fp_regnum = 2, + struct_return_regnum = 3, + last_gpr_regnum = 63, + + /* Register numbers 64 -- 127 are always reserved for floating-point + registers. The chip at hand may have less. */ + first_fpr_regnum = 64, + last_fpr_regnum = 127, + + /* Register numbers 128 on up are always reserved for special-purpose + registers. */ + first_spr_regnum = 128, + pc_regnum = 128, + psr_regnum = 129, + ccr_regnum = 130, + cccr_regnum = 131, + tbr_regnum = 135, + brr_regnum = 136, + dbar0_regnum = 137, + dbar1_regnum = 138, + dbar2_regnum = 139, + dbar3_regnum = 140, + lr_regnum = 145, + lcr_regnum = 146, + last_spr_regnum = 146 +}; + +static LONGEST frv_call_dummy_words[] = +{0}; + + +/* The contents of this structure can only be trusted after we've + frv_frame_init_saved_regs on the frame. */ +struct frame_extra_info + { + /* The offset from our frame pointer to our caller's stack + pointer. */ + int fp_to_callers_sp_offset; + + /* Non-zero if we've saved our return address on the stack yet. + Zero if it's still sitting in the link register. */ + int lr_saved_on_stack; + }; + + +/* A structure describing a particular variant of the FRV. + We allocate and initialize one of these structures when we create + the gdbarch object for a variant. + + At the moment, all the FR variants we support differ only in which + registers are present; the portable code of GDB knows that + registers whose names are the empty string don't exist, so the + `register_names' array captures all the per-variant information we + need. + + in the future, if we need to have per-variant maps for raw size, + virtual type, etc., we should replace register_names with an array + of structures, each of which gives all the necessary info for one + register. Don't stick parallel arrays in here --- that's so + Fortran. */ +struct gdbarch_tdep +{ + /* How many general-purpose registers does this variant have? */ + int num_gprs; + + /* How many floating-point registers does this variant have? */ + int num_fprs; + + /* How many hardware watchpoints can it support? */ + int num_hw_watchpoints; + + /* How many hardware breakpoints can it support? */ + int num_hw_breakpoints; + + /* Register names. */ + char **register_names; +}; + +#define CURRENT_VARIANT (gdbarch_tdep (current_gdbarch)) + + +/* Allocate a new variant structure, and set up default values for all + the fields. */ +static struct gdbarch_tdep * +new_variant () +{ + struct gdbarch_tdep *var; + int r; + char buf[20]; + + var = xmalloc (sizeof (*var)); + memset (var, 0, sizeof (*var)); + + var->num_gprs = 64; + var->num_fprs = 64; + var->num_hw_watchpoints = 0; + var->num_hw_breakpoints = 0; + + /* By default, don't supply any general-purpose or floating-point + register names. */ + var->register_names = (char **) xmalloc (frv_num_regs * sizeof (char *)); + for (r = 0; r < frv_num_regs; r++) + var->register_names[r] = ""; + + /* Do, however, supply default names for the special-purpose + registers. */ + for (r = first_spr_regnum; r <= last_spr_regnum; ++r) + { + sprintf (buf, "x%d", r); + var->register_names[r] = xstrdup (buf); + } + + var->register_names[pc_regnum] = "pc"; + var->register_names[lr_regnum] = "lr"; + var->register_names[lcr_regnum] = "lcr"; + + var->register_names[psr_regnum] = "psr"; + var->register_names[ccr_regnum] = "ccr"; + var->register_names[cccr_regnum] = "cccr"; + var->register_names[tbr_regnum] = "tbr"; + + /* Debug registers. */ + var->register_names[brr_regnum] = "brr"; + var->register_names[dbar0_regnum] = "dbar0"; + var->register_names[dbar1_regnum] = "dbar1"; + var->register_names[dbar2_regnum] = "dbar2"; + var->register_names[dbar3_regnum] = "dbar3"; + + return var; +} + + +/* Indicate that the variant VAR has NUM_GPRS general-purpose + registers, and fill in the names array appropriately. */ +static void +set_variant_num_gprs (struct gdbarch_tdep *var, int num_gprs) +{ + int r; + + var->num_gprs = num_gprs; + + for (r = 0; r < num_gprs; ++r) + { + char buf[20]; + + sprintf (buf, "gr%d", r); + var->register_names[first_gpr_regnum + r] = xstrdup (buf); + } +} + + +/* Indicate that the variant VAR has NUM_FPRS floating-point + registers, and fill in the names array appropriately. */ +static void +set_variant_num_fprs (struct gdbarch_tdep *var, int num_fprs) +{ + int r; + + var->num_fprs = num_fprs; + + for (r = 0; r < num_fprs; ++r) + { + char buf[20]; + + sprintf (buf, "fr%d", r); + var->register_names[first_fpr_regnum + r] = xstrdup (buf); + } +} + + +static const char * +frv_register_name (int reg) +{ + if (reg < 0) + return "?toosmall?"; + if (reg >= frv_num_regs) + return "?toolarge?"; + + return CURRENT_VARIANT->register_names[reg]; +} + + +static int +frv_register_raw_size (int reg) +{ + return 4; +} + +static int +frv_register_virtual_size (int reg) +{ + return 4; +} + +static struct type * +frv_register_virtual_type (int reg) +{ + if (reg >= 64 && reg <= 127) + return builtin_type_float; + else + return builtin_type_int; +} + +static int +frv_register_byte (int reg) +{ + return (reg * 4); +} + +static const unsigned char * +frv_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenp) +{ + static unsigned char breakpoint[] = {0xc0, 0x70, 0x00, 0x01}; + *lenp = sizeof (breakpoint); + return breakpoint; +} + +static CORE_ADDR +frv_frame_chain (struct frame_info *frame) +{ + CORE_ADDR saved_fp_addr; + + if (frame->saved_regs && frame->saved_regs[fp_regnum] != 0) + saved_fp_addr = frame->saved_regs[fp_regnum]; + else + /* Just assume it was saved in the usual place. */ + saved_fp_addr = frame->frame; + + return read_memory_integer (saved_fp_addr, 4); +} + +static CORE_ADDR +frv_frame_saved_pc (struct frame_info *frame) +{ + frv_frame_init_saved_regs (frame); + + /* Perhaps the prologue analyzer recorded where it was stored. + (As of 14 Oct 2001, it never does.) */ + if (frame->saved_regs && frame->saved_regs[pc_regnum] != 0) + return read_memory_integer (frame->saved_regs[pc_regnum], 4); + + /* If the prologue analyzer tells us the link register was saved on + the stack, get it from there. */ + if (frame->extra_info->lr_saved_on_stack) + return read_memory_integer (frame->frame + 8, 4); + + /* Otherwise, it's still in LR. + However, if FRAME isn't the youngest frame, this is kind of + suspicious --- if this frame called somebody else, then its LR + has certainly been overwritten. */ + if (! frame->next) + return read_register (lr_regnum); + + /* By default, assume it's saved in the standard place, relative to + the frame pointer. */ + return read_memory_integer (frame->frame + 8, 4); +} + + +/* Return true if REG is a caller-saves ("scratch") register, + false otherwise. */ +static int +is_caller_saves_reg (int reg) +{ + return ((4 <= reg && reg <= 7) + || (14 <= reg && reg <= 15) + || (32 <= reg && reg <= 47)); +} + + +/* Return true if REG is a callee-saves register, false otherwise. */ +static int +is_callee_saves_reg (int reg) +{ + return ((16 <= reg && reg <= 31) + || (48 <= reg && reg <= 63)); +} + + +/* Return true if REG is an argument register, false otherwise. */ +static int +is_argument_reg (int reg) +{ + return (8 <= reg && reg <= 13); +} + + +/* Scan an FR-V prologue, starting at PC, until frame->PC. + If FRAME is non-zero, fill in its saved_regs with appropriate addresses. + We assume FRAME's saved_regs array has already been allocated and cleared. + Return the first PC value after the prologue. + + Note that, for unoptimized code, we almost don't need this function + at all; all arguments and locals live on the stack, so we just need + the FP to find everything. The catch: structures passed by value + have their addresses living in registers; they're never spilled to + the stack. So if you ever want to be able to get to these + arguments in any frame but the top, you'll need to do this serious + prologue analysis. */ +static CORE_ADDR +frv_analyze_prologue (CORE_ADDR pc, struct frame_info *frame) +{ + /* When writing out instruction bitpatterns, we use the following + letters to label instruction fields: + P - The parallel bit. We don't use this. + J - The register number of GRj in the instruction description. + K - The register number of GRk in the instruction description. + I - The register number of GRi. + S - a signed imediate offset. + U - an unsigned immediate offset. + + The dots below the numbers indicate where hex digit boundaries + fall, to make it easier to check the numbers. */ + + /* Non-zero iff we've seen the instruction that initializes the + frame pointer for this function's frame. */ + int fp_set = 0; + + /* If fp_set is non_zero, then this is the distance from + the stack pointer to frame pointer: fp = sp + fp_offset. */ + int fp_offset = 0; + + /* Total size of frame prior to any alloca operations. */ + int framesize = 0; + + /* The number of the general-purpose register we saved the return + address ("link register") in, or -1 if we haven't moved it yet. */ + int lr_save_reg = -1; + + /* Non-zero iff we've saved the LR onto the stack. */ + int lr_saved_on_stack = 0; + + /* If gr_saved[i] is non-zero, then we've noticed that general + register i has been saved at gr_sp_offset[i] from the stack + pointer. */ + char gr_saved[64]; + int gr_sp_offset[64]; + + memset (gr_saved, 0, sizeof (gr_saved)); + + while (! frame || pc < frame->pc) + { + LONGEST op = read_memory_integer (pc, 4); + + /* The tests in this chain of ifs should be in order of + decreasing selectivity, so that more particular patterns get + to fire before less particular patterns. */ + + /* Setting the FP from the SP: + ori sp, 0, fp + P 000010 0100010 000001 000000000000 = 0x04881000 + 0 111111 1111111 111111 111111111111 = 0x7fffffff + . . . . . . . . + We treat this as part of the prologue. */ + if ((op & 0x7fffffff) == 0x04881000) + { + fp_set = 1; + fp_offset = 0; + } + + /* Move the link register to the scratch register grJ, before saving: + movsg lr, grJ + P 000100 0000011 010000 000111 JJJJJJ = 0x080d01c0 + 0 111111 1111111 111111 111111 000000 = 0x7fffffc0 + . . . . . . . . + We treat this as part of the prologue. */ + else if ((op & 0x7fffffc0) == 0x080d01c0) + { + int gr_j = op & 0x3f; + + /* If we're moving it to a scratch register, that's fine. */ + if (is_caller_saves_reg (gr_j)) + lr_save_reg = gr_j; + /* Otherwise it's not a prologue instruction that we + recognize. */ + else + break; + } + + /* To save multiple callee-saves registers on the stack, at + offset zero: + + std grK,@(sp,gr0) + P KKKKKK 0000011 000001 000011 000000 = 0x000c10c0 + 0 000000 1111111 111111 111111 111111 = 0x01ffffff + + stq grK,@(sp,gr0) + P KKKKKK 0000011 000001 000100 000000 = 0x000c1100 + 0 000000 1111111 111111 111111 111111 = 0x01ffffff + . . . . . . . . + We treat this as part of the prologue, and record the register's + saved address in the frame structure. */ + else if ((op & 0x01ffffff) == 0x000c10c0 + || (op & 0x01ffffff) == 0x000c1100) + { + int gr_k = ((op >> 25) & 0x3f); + int ope = ((op >> 6) & 0x3f); + int count; + int i; + + /* Is it an std or an stq? */ + if (ope == 0x03) + count = 2; + else + count = 4; + + /* Is it really a callee-saves register? */ + if (is_callee_saves_reg (gr_k)) + { + for (i = 0; i < count; i++) + { + gr_saved[gr_k + i] = 1; + gr_sp_offset[gr_k + i] = 4 * i; + } + } + else + /* It's not a prologue instruction. */ + break; + } + + /* Adjusting the stack pointer. (The stack pointer is GR1.) + addi sp, S, sp + P 000001 0010000 000001 SSSSSSSSSSSS = 0x02401000 + 0 111111 1111111 111111 000000000000 = 0x7ffff000 + . . . . . . . . + We treat this as part of the prologue. */ + else if ((op & 0x7ffff000) == 0x02401000) + { + /* Sign-extend the twelve-bit field. + (Isn't there a better way to do this?) */ + int s = (((op & 0xfff) - 0x800) & 0xfff) - 0x800; + + framesize -= s; + } + + /* Setting the FP to a constant distance from the SP: + addi sp, S, fp + P 000010 0010000 000001 SSSSSSSSSSSS = 0x04401000 + 0 111111 1111111 111111 000000000000 = 0x7ffff000 + . . . . . . . . + We treat this as part of the prologue. */ + else if ((op & 0x7ffff000) == 0x04401000) + { + /* Sign-extend the twelve-bit field. + (Isn't there a better way to do this?) */ + int s = (((op & 0xfff) - 0x800) & 0xfff) - 0x800; + fp_set = 1; + fp_offset = s; + } + + /* To spill an argument register to a scratch register: + ori GRi, 0, GRk + P KKKKKK 0100010 IIIIII 000000000000 = 0x00880000 + 0 000000 1111111 000000 111111111111 = 0x01fc0fff + . . . . . . . . + For the time being, we treat this as a prologue instruction, + assuming that GRi is an argument register. This one's kind + of suspicious, because it seems like it could be part of a + legitimate body instruction. But we only come here when the + source info wasn't helpful, so we have to do the best we can. + Hopefully once GCC and GDB agree on how to emit line number + info for prologues, then this code will never come into play. */ + else if ((op & 0x01fc0fff) == 0x00880000) + { + int gr_i = ((op >> 12) & 0x3f); + + /* If the source isn't an arg register, then this isn't a + prologue instruction. */ + if (! is_argument_reg (gr_i)) + break; + } + + /* To spill 16-bit values to the stack: + sthi GRk, @(fp, s) + P KKKKKK 1010001 000010 SSSSSSSSSSSS = 0x01442000 + 0 000000 1111111 111111 000000000000 = 0x01fff000 + . . . . . . . . + And for 8-bit values, we use STB instructions. + stbi GRk, @(fp, s) + P KKKKKK 1010000 000010 SSSSSSSSSSSS = 0x01402000 + 0 000000 1111111 111111 000000000000 = 0x01fff000 + . . . . . . . . + We check that GRk is really an argument register, and treat + all such as part of the prologue. */ + else if ( (op & 0x01fff000) == 0x01442000 + || (op & 0x01fff000) == 0x01402000) + { + int gr_k = ((op >> 25) & 0x3f); + + if (! is_argument_reg (gr_k)) + break; /* Source isn't an arg register. */ + } + + /* To save multiple callee-saves register on the stack, at a + non-zero offset: + + stdi GRk, @(sp, s) + P KKKKKK 1010011 000001 SSSSSSSSSSSS = 0x014c1000 + 0 000000 1111111 111111 000000000000 = 0x01fff000 + . . . . . . . . + stqi GRk, @(sp, s) + P KKKKKK 1010100 000001 SSSSSSSSSSSS = 0x01501000 + 0 000000 1111111 111111 000000000000 = 0x01fff000 + . . . . . . . . + We treat this as part of the prologue, and record the register's + saved address in the frame structure. */ + else if ((op & 0x01fff000) == 0x014c1000 + || (op & 0x01fff000) == 0x01501000) + { + int gr_k = ((op >> 25) & 0x3f); + int count; + int i; + + /* Is it a stdi or a stqi? */ + if ((op & 0x01fff000) == 0x014c1000) + count = 2; + else + count = 4; + + /* Is it really a callee-saves register? */ + if (is_callee_saves_reg (gr_k)) + { + /* Sign-extend the twelve-bit field. + (Isn't there a better way to do this?) */ + int s = (((op & 0xfff) - 0x800) & 0xfff) - 0x800; + + for (i = 0; i < count; i++) + { + gr_saved[gr_k + i] = 1; + gr_sp_offset[gr_k + i] = s + (4 * i); + } + } + else + /* It's not a prologue instruction. */ + break; + } + + /* Storing any kind of integer register at any constant offset + from any other register. + + st GRk, @(GRi, gr0) + P KKKKKK 0000011 IIIIII 000010 000000 = 0x000c0080 + 0 000000 1111111 000000 111111 111111 = 0x01fc0fff + . . . . . . . . + sti GRk, @(GRi, d12) + P KKKKKK 1010010 IIIIII SSSSSSSSSSSS = 0x01480000 + 0 000000 1111111 000000 000000000000 = 0x01fc0000 + . . . . . . . . + These could be almost anything, but a lot of prologue + instructions fall into this pattern, so let's decode the + instruction once, and then work at a higher level. */ + else if (((op & 0x01fc0fff) == 0x000c0080) + || ((op & 0x01fc0000) == 0x01480000)) + { + int gr_k = ((op >> 25) & 0x3f); + int gr_i = ((op >> 12) & 0x3f); + int offset; + + /* Are we storing with gr0 as an offset, or using an + immediate value? */ + if ((op & 0x01fc0fff) == 0x000c0080) + offset = 0; + else + offset = (((op & 0xfff) - 0x800) & 0xfff) - 0x800; + + /* If the address isn't relative to the SP or FP, it's not a + prologue instruction. */ + if (gr_i != sp_regnum && gr_i != fp_regnum) + break; + + /* Saving the old FP in the new frame (relative to the SP). */ + if (gr_k == fp_regnum && gr_i == sp_regnum) + ; + + /* Saving callee-saves register(s) on the stack, relative to + the SP. */ + else if (gr_i == sp_regnum + && is_callee_saves_reg (gr_k)) + { + gr_saved[gr_k] = 1; + gr_sp_offset[gr_k] = offset; + } + + /* Saving the scratch register holding the return address. */ + else if (lr_save_reg != -1 + && gr_k == lr_save_reg) + lr_saved_on_stack = 1; + + /* Spilling int-sized arguments to the stack. */ + else if (is_argument_reg (gr_k)) + ; + + /* It's not a store instruction we recognize, so this must + be the end of the prologue. */ + else + break; + } + + /* It's not any instruction we recognize, so this must be the end + of the prologue. */ + else + break; + + pc += 4; + } + + if (frame) + { + frame->extra_info->lr_saved_on_stack = lr_saved_on_stack; + + /* If we know the relationship between the stack and frame + pointers, record the addresses of the registers we noticed. + Note that we have to do this as a separate step at the end, + because instructions may save relative to the SP, but we need + their addresses relative to the FP. */ + if (fp_set) + { + int i; + + for (i = 0; i < 64; i++) + if (gr_saved[i]) + frame->saved_regs[i] = (frame->frame + - fp_offset + gr_sp_offset[i]); + + frame->extra_info->fp_to_callers_sp_offset = framesize - fp_offset; + } + } + + return pc; +} + + +static CORE_ADDR +frv_skip_prologue (CORE_ADDR pc) +{ + CORE_ADDR func_addr, func_end, new_pc; + + new_pc = pc; + + /* If the line table has entry for a line *within* the function + (i.e., not in the prologue, and not past the end), then that's + our location. */ + if (find_pc_partial_function (pc, NULL, &func_addr, &func_end)) + { + struct symtab_and_line sal; + + sal = find_pc_line (func_addr, 0); + + if (sal.line != 0 && sal.end < func_end) + { + new_pc = sal.end; + } + } + + /* The FR-V prologue is at least five instructions long (twenty bytes). + If we didn't find a real source location past that, then + do a full analysis of the prologue. */ + if (new_pc < pc + 20) + new_pc = frv_analyze_prologue (pc, 0); + + return new_pc; +} + +static void +frv_frame_init_saved_regs (struct frame_info *frame) +{ + if (frame->saved_regs) + return; + + frame_saved_regs_zalloc (frame); + frame->saved_regs[fp_regnum] = frame->frame; + + /* Find the beginning of this function, so we can analyze its + prologue. */ + { + CORE_ADDR func_addr, func_end; + + if (find_pc_partial_function (frame->pc, NULL, &func_addr, &func_end)) + frv_analyze_prologue (func_addr, frame); + } +} + +/* Should we use EXTRACT_STRUCT_VALUE_ADDRESS instead of + EXTRACT_RETURN_VALUE? GCC_P is true if compiled with gcc + and TYPE is the type (which is known to be struct, union or array). + + The frv returns all structs in memory. */ + +static int +frv_use_struct_convention (int gcc_p, struct type *type) +{ + return 1; +} + +static void +frv_extract_return_value (struct type *type, char *regbuf, char *valbuf) +{ + memcpy (valbuf, (regbuf + + frv_register_byte (8) + + (TYPE_LENGTH (type) < 4 ? 4 - TYPE_LENGTH (type) : 0)), + TYPE_LENGTH (type)); +} + +static CORE_ADDR +frv_extract_struct_value_address (char *regbuf) +{ + return extract_address (regbuf + frv_register_byte (struct_return_regnum), + 4); +} + +static void +frv_store_struct_return (CORE_ADDR addr, CORE_ADDR sp) +{ + write_register (struct_return_regnum, addr); +} + +static int +frv_frameless_function_invocation (struct frame_info *frame) +{ + return frameless_look_for_prologue (frame); +} + +static CORE_ADDR +frv_saved_pc_after_call (struct frame_info *frame) +{ + return read_register (lr_regnum); +} + +static void +frv_init_extra_frame_info (int fromleaf, struct frame_info *frame) +{ + frame->extra_info = (struct frame_extra_info *) + frame_obstack_alloc (sizeof (struct frame_extra_info)); + frame->extra_info->fp_to_callers_sp_offset = 0; + frame->extra_info->lr_saved_on_stack = 0; +} + +#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1)) +#define ROUND_DOWN(n,a) ((n) & ~((a)-1)) + +static CORE_ADDR +frv_push_arguments (int nargs, struct value **args, CORE_ADDR sp, + int struct_return, CORE_ADDR struct_addr) +{ + int argreg; + int argnum; + char *val; + char valbuf[4]; + struct value *arg; + struct type *arg_type; + int len; + enum type_code typecode; + CORE_ADDR regval; + int stack_space; + int stack_offset; + +#if 0 + printf("Push %d args at sp = %x, struct_return=%d (%x)\n", + nargs, (int) sp, struct_return, struct_addr); +#endif + + stack_space = 0; + for (argnum = 0; argnum < nargs; ++argnum) + stack_space += ROUND_UP (TYPE_LENGTH (VALUE_TYPE (args[argnum])), 4); + + stack_space -= (6 * 4); + if (stack_space > 0) + sp -= stack_space; + + /* Make sure stack is dword aligned. */ + sp = ROUND_DOWN (sp, 8); + + stack_offset = 0; + + argreg = 8; + + if (struct_return) + write_register (struct_return_regnum, struct_addr); + + for (argnum = 0; argnum < nargs; ++argnum) + { + arg = args[argnum]; + arg_type = check_typedef (VALUE_TYPE (arg)); + len = TYPE_LENGTH (arg_type); + typecode = TYPE_CODE (arg_type); + + if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION) + { + store_address (valbuf, 4, VALUE_ADDRESS (arg)); + typecode = TYPE_CODE_PTR; + len = 4; + val = valbuf; + } + else + { + val = (char *) VALUE_CONTENTS (arg); + } + + while (len > 0) + { + int partial_len = (len < 4 ? len : 4); + + if (argreg < 14) + { + regval = extract_address (val, partial_len); +#if 0 + printf(" Argnum %d data %x -> reg %d\n", + argnum, (int) regval, argreg); +#endif + write_register (argreg, regval); + ++argreg; + } + else + { +#if 0 + printf(" Argnum %d data %x -> offset %d (%x)\n", + argnum, *((int *)val), stack_offset, (int) (sp + stack_offset)); +#endif + write_memory (sp + stack_offset, val, partial_len); + stack_offset += ROUND_UP(partial_len, 4); + } + len -= partial_len; + val += partial_len; + } + } + return sp; +} + +static CORE_ADDR +frv_push_return_address (CORE_ADDR pc, CORE_ADDR sp) +{ + write_register (lr_regnum, CALL_DUMMY_ADDRESS ()); + return sp; +} + +static void +frv_store_return_value (struct type *type, char *valbuf) +{ + int length = TYPE_LENGTH (type); + int reg8_offset = frv_register_byte (8); + + if (length <= 4) + write_register_bytes (reg8_offset + (4 - length), valbuf, length); + else if (length == 8) + write_register_bytes (reg8_offset, valbuf, length); + else + internal_error (__FILE__, __LINE__, + "Don't know how to return a %d-byte value.", length); +} + +static void +frv_pop_frame (void) +{ + generic_pop_current_frame (frv_pop_frame_regular); +} + +static void +frv_pop_frame_regular (struct frame_info *frame) +{ + CORE_ADDR fp; + int regno; + + fp = frame->frame; + + frv_frame_init_saved_regs (frame); + + write_register (pc_regnum, frv_frame_saved_pc (frame)); + for (regno = 0; regno < frv_num_regs; ++regno) + { + if (frame->saved_regs[regno] + && regno != pc_regnum + && regno != sp_regnum) + { + write_register (regno, + read_memory_integer (frame->saved_regs[regno], 4)); + } + } + write_register (sp_regnum, fp + frame->extra_info->fp_to_callers_sp_offset); + flush_cached_frames (); +} + + +static void +frv_remote_translate_xfer_address (CORE_ADDR memaddr, int nr_bytes, + CORE_ADDR *targ_addr, int *targ_len) +{ + *targ_addr = memaddr; + *targ_len = nr_bytes; +} + + +/* Hardware watchpoint / breakpoint support for the FR500 + and FR400. */ + +int +frv_check_watch_resources (int type, int cnt, int ot) +{ + struct gdbarch_tdep *var = CURRENT_VARIANT; + + /* Watchpoints not supported on simulator. */ + if (strcmp (target_shortname, "sim") == 0) + return 0; + + if (type == bp_hardware_breakpoint) + { + if (var->num_hw_breakpoints == 0) + return 0; + else if (cnt <= var->num_hw_breakpoints) + return 1; + } + else + { + if (var->num_hw_watchpoints == 0) + return 0; + else if (ot) + return -1; + else if (cnt <= var->num_hw_watchpoints) + return 1; + } + return -1; +} + + +CORE_ADDR +frv_stopped_data_address () +{ + CORE_ADDR brr, dbar0, dbar1, dbar2, dbar3; + + brr = read_register (brr_regnum); + dbar0 = read_register (dbar0_regnum); + dbar1 = read_register (dbar1_regnum); + dbar2 = read_register (dbar2_regnum); + dbar3 = read_register (dbar3_regnum); + + if (brr & (1<<11)) + return dbar0; + else if (brr & (1<<10)) + return dbar1; + else if (brr & (1<<9)) + return dbar2; + else if (brr & (1<<8)) + return dbar3; + else + return 0; +} + +static struct gdbarch * +frv_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) +{ + struct gdbarch *gdbarch; + struct gdbarch_tdep *var; + + /* Check to see if we've already built an appropriate architecture + object for this executable. */ + arches = gdbarch_list_lookup_by_info (arches, &info); + if (arches) + return arches->gdbarch; + + /* Select the right tdep structure for this variant. */ + var = new_variant (); + switch (info.bfd_arch_info->mach) + { + case bfd_mach_frv: + case bfd_mach_frvsimple: + case bfd_mach_fr500: + case bfd_mach_frvtomcat: + set_variant_num_gprs (var, 64); + set_variant_num_fprs (var, 64); + break; + + case bfd_mach_fr400: + set_variant_num_gprs (var, 32); + set_variant_num_fprs (var, 32); + break; + + default: + /* Never heard of this variant. */ + return 0; + } + + gdbarch = gdbarch_alloc (&info, var); + + set_gdbarch_short_bit (gdbarch, 16); + set_gdbarch_int_bit (gdbarch, 32); + set_gdbarch_long_bit (gdbarch, 32); + set_gdbarch_long_long_bit (gdbarch, 64); + set_gdbarch_float_bit (gdbarch, 32); + set_gdbarch_double_bit (gdbarch, 64); + set_gdbarch_long_double_bit (gdbarch, 64); + set_gdbarch_ptr_bit (gdbarch, 32); + + set_gdbarch_num_regs (gdbarch, frv_num_regs); + set_gdbarch_sp_regnum (gdbarch, sp_regnum); + set_gdbarch_fp_regnum (gdbarch, fp_regnum); + set_gdbarch_pc_regnum (gdbarch, pc_regnum); + + set_gdbarch_register_name (gdbarch, frv_register_name); + set_gdbarch_register_size (gdbarch, 4); + set_gdbarch_register_bytes (gdbarch, frv_num_regs * 4); + set_gdbarch_register_byte (gdbarch, frv_register_byte); + set_gdbarch_register_raw_size (gdbarch, frv_register_raw_size); + set_gdbarch_max_register_raw_size (gdbarch, 4); + set_gdbarch_register_virtual_size (gdbarch, frv_register_virtual_size); + set_gdbarch_max_register_virtual_size (gdbarch, 4); + set_gdbarch_register_virtual_type (gdbarch, frv_register_virtual_type); + + set_gdbarch_skip_prologue (gdbarch, frv_skip_prologue); + set_gdbarch_breakpoint_from_pc (gdbarch, frv_breakpoint_from_pc); + + set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown); + set_gdbarch_frame_args_skip (gdbarch, 0); + set_gdbarch_frameless_function_invocation (gdbarch, frv_frameless_function_invocation); + + set_gdbarch_saved_pc_after_call (gdbarch, frv_saved_pc_after_call); + + set_gdbarch_frame_chain (gdbarch, frv_frame_chain); + set_gdbarch_frame_chain_valid (gdbarch, func_frame_chain_valid); + set_gdbarch_frame_saved_pc (gdbarch, frv_frame_saved_pc); + set_gdbarch_frame_args_address (gdbarch, default_frame_address); + set_gdbarch_frame_locals_address (gdbarch, default_frame_address); + + set_gdbarch_frame_init_saved_regs (gdbarch, frv_frame_init_saved_regs); + + set_gdbarch_use_struct_convention (gdbarch, frv_use_struct_convention); + set_gdbarch_deprecated_extract_return_value (gdbarch, frv_extract_return_value); + + set_gdbarch_store_struct_return (gdbarch, frv_store_struct_return); + set_gdbarch_store_return_value (gdbarch, frv_store_return_value); + set_gdbarch_deprecated_extract_struct_value_address (gdbarch, frv_extract_struct_value_address); + + /* Settings for calling functions in the inferior. */ + set_gdbarch_use_generic_dummy_frames (gdbarch, 1); + set_gdbarch_call_dummy_length (gdbarch, 0); + set_gdbarch_coerce_float_to_double (gdbarch, + standard_coerce_float_to_double); + set_gdbarch_push_arguments (gdbarch, frv_push_arguments); + set_gdbarch_push_return_address (gdbarch, frv_push_return_address); + set_gdbarch_pop_frame (gdbarch, frv_pop_frame); + + set_gdbarch_call_dummy_p (gdbarch, 1); + set_gdbarch_call_dummy_words (gdbarch, frv_call_dummy_words); + set_gdbarch_sizeof_call_dummy_words (gdbarch, sizeof (frv_call_dummy_words)); + set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1); + set_gdbarch_init_extra_frame_info (gdbarch, frv_init_extra_frame_info); + + /* Settings that should be unnecessary. */ + set_gdbarch_inner_than (gdbarch, core_addr_lessthan); + + set_gdbarch_read_pc (gdbarch, generic_target_read_pc); + set_gdbarch_write_pc (gdbarch, generic_target_write_pc); + set_gdbarch_read_fp (gdbarch, generic_target_read_fp); + set_gdbarch_read_sp (gdbarch, generic_target_read_sp); + set_gdbarch_write_sp (gdbarch, generic_target_write_sp); + + set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT); + set_gdbarch_call_dummy_address (gdbarch, entry_point_address); + set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0); + set_gdbarch_call_dummy_start_offset (gdbarch, 0); + set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy_at_entry_point); + set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0); + set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame); + set_gdbarch_fix_call_dummy (gdbarch, generic_fix_call_dummy); + + set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register); + + set_gdbarch_decr_pc_after_break (gdbarch, 0); + set_gdbarch_function_start_offset (gdbarch, 0); + set_gdbarch_register_convertible (gdbarch, generic_register_convertible_not); + + set_gdbarch_remote_translate_xfer_address + (gdbarch, frv_remote_translate_xfer_address); + + /* Hardware watchpoint / breakpoint support. */ + switch (info.bfd_arch_info->mach) + { + case bfd_mach_frv: + case bfd_mach_frvsimple: + case bfd_mach_fr500: + case bfd_mach_frvtomcat: + /* fr500-style hardware debugging support. */ + var->num_hw_watchpoints = 4; + var->num_hw_breakpoints = 4; + break; + + case bfd_mach_fr400: + /* fr400-style hardware debugging support. */ + var->num_hw_watchpoints = 2; + var->num_hw_breakpoints = 4; + break; + + default: + /* Otherwise, assume we don't have hardware debugging support. */ + var->num_hw_watchpoints = 0; + var->num_hw_breakpoints = 0; + break; + } + + return gdbarch; +} + +void +_initialize_frv_tdep (void) +{ + register_gdbarch_init (bfd_arch_frv, frv_gdbarch_init); + + tm_print_insn = print_insn_frv; +} + + -- 2.11.0