From 55f3fba6c822f05b02f06070efaadf0300b5f9f1 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 8 Sep 2011 18:27:33 +0300 Subject: [PATCH] usb: dwc3: ep0: introduce ep0_expect_in flag This flag will tell us which direction we're expecting on the next (data or status) phase. It will help us catching errors of host going crazy and requesting data of the wrong direction. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/ep0.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 92673fd5314d..07d20186e46d 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -529,6 +529,7 @@ static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat) * @three_stage_setup: set if we perform a three phase setup * @ep0_status_pending: ep0 status response without a req is pending * @ep0_bounced: true when we used bounce buffer + * @ep0_expect_in: true when we expect a DATA IN transfer * @ep0_next_event: hold the next expected event * @ep0state: state of endpoint zero * @link_state: link state @@ -575,6 +576,7 @@ struct dwc3 { unsigned three_stage_setup:1; unsigned ep0_status_pending:1; unsigned ep0_bounced:1; + unsigned ep0_expect_in:1; enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 4cc72fdc0575..b66d96905728 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -545,6 +545,8 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, dwc->ep0_next_event = DWC3_EP0_NRDY_DATA; } + dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN); + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) ret = dwc3_ep0_std_request(dwc, ctrl); else @@ -758,6 +760,20 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc, return; } + /* + * One of the possible error cases is when Host _does_ + * request for Data Phase, but it does so on the wrong + * direction. + * + * Here, we already know ep0_next_event is DATA (see above), + * so we only need to check for direction. + */ + if (dwc->ep0_expect_in != event->endpoint_number) { + dev_vdbg(dwc->dev, "Wrong direction for Data phase\n"); + dwc3_ep0_stall_and_restart(dwc); + return; + } + dwc3_ep0_do_control_data(dwc, event); break; -- 2.11.0