From 57197b66d0d68dfe7aa612853efd493c79c4ba3a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 1 Oct 2020 12:10:05 +0200 Subject: [PATCH] dt-bindings: net: renesas,ravb: Document internal clock delay properties Some EtherAVB variants support internal clock delay configuration, which can add larger delays than the delays that are typically supported by the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps" properties). Add properties for configuring the internal MAC delays. These properties are mandatory, even when specified as zero, to distinguish between old and new DTBs. Update the (bogus) example accordingly. Signed-off-by: Geert Uytterhoeven Reviewed-by: Sergei Shtylyov Reviewed-by: Rob Herring Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- .../devicetree/bindings/net/renesas,ravb.txt | 29 ++++++++++++---------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 032b76f14f4f..4a62dd11d5c4 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -64,6 +64,18 @@ Optional properties: AVB_LINK signal. - renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is active-low instead of normal active-high. +- rx-internal-delay-ps: Internal RX clock delay. + This property is mandatory and valid only on R-Car Gen3 + and RZ/G2 SoCs. + Valid values are 0 and 1800. + A non-zero value is allowed only if phy-mode = "rgmii". + Zero is not supported on R-Car D3. +- tx-internal-delay-ps: Internal TX clock delay. + This property is mandatory and valid only on R-Car H3, + M3-W, M3-W+, M3-N, V3M, and V3H, and RZ/G2M and RZ/G2N. + Valid values are 0 and 2000. + A non-zero value is allowed only if phy-mode = "rgmii". + Zero is not supported on R-Car V3H. Example: @@ -105,8 +117,10 @@ Example: "ch24"; clocks = <&cpg CPG_MOD 812>; power-domains = <&cpg>; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; phy-handle = <&phy0>; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <2000>; pinctrl-0 = <ðer_pins>; pinctrl-names = "default"; @@ -115,18 +129,7 @@ Example: #size-cells = <0>; phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; -- 2.11.0