From 60e1d0fb290197fe505dff6e4e3b7e4d258dbf60 Mon Sep 17 00:00:00 2001 From: Carl Huang Date: Thu, 19 Apr 2018 19:39:40 +0300 Subject: [PATCH] ath10k: support MAC address randomization in scan The ath10k reports the random_mac_addr capability to upper layer based on the service bit firmware reported. Driver sets the spoofed flag in scan_ctrl_flag to firmware if upper layer has enabled this feature in scan request. Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1, but QCA9377 is also affected. Signed-off-by: Carl Huang Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 17 +++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-ops.h | 22 ++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 25 +++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.h | 11 +++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 5 +++++ drivers/net/wireless/ath/ath10k/wmi.h | 9 +++++++++ 6 files changed, 89 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index fc3320f94f45..c71cf5b81385 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -5717,6 +5717,12 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw, arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; } + if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) { + arg.scan_ctrl_flags |= WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ; + ether_addr_copy(arg.mac_addr.addr, req->mac_addr); + ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask); + } + if (req->n_channels) { arg.n_channels = req->n_channels; for (i = 0; i < arg.n_channels; i++) @@ -8433,6 +8439,17 @@ int ath10k_mac_register(struct ath10k *ar) goto err_dfs_detector_exit; } + if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) { + ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr); + if (ret) { + ath10k_err(ar, "failed to set prob req oui: %i\n", ret); + goto err_dfs_detector_exit; + } + + ar->hw->wiphy->features |= + NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR; + } + ar->hw->wiphy->cipher_suites = cipher_suites; /* QCA988x and QCA6174 family chips do not support CCMP-256, GCMP-128 diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index 4f7e0ba071a2..e37d16b31afe 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -119,6 +119,8 @@ struct wmi_ops { u32 value); struct sk_buff *(*gen_scan_chan_list)(struct ath10k *ar, const struct wmi_scan_chan_list_arg *arg); + struct sk_buff *(*gen_scan_prob_req_oui)(struct ath10k *ar, + u32 prob_req_oui); struct sk_buff *(*gen_beacon_dma)(struct ath10k *ar, u32 vdev_id, const void *bcn, size_t bcn_len, u32 bcn_paddr, bool dtim_zero, @@ -915,6 +917,26 @@ ath10k_wmi_scan_chan_list(struct ath10k *ar, } static inline int +ath10k_wmi_scan_prob_req_oui(struct ath10k *ar, const u8 mac_addr[ETH_ALEN]) +{ + struct sk_buff *skb; + u32 prob_req_oui; + + prob_req_oui = (((u32)mac_addr[0]) << 16) | + (((u32)mac_addr[1]) << 8) | mac_addr[2]; + + if (!ar->wmi.ops->gen_scan_prob_req_oui) + return -EOPNOTSUPP; + + skb = ar->wmi.ops->gen_scan_prob_req_oui(ar, prob_req_oui); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + return ath10k_wmi_cmd_send(ar, skb, + ar->wmi.cmd->scan_prob_req_oui_cmdid); +} + +static inline int ath10k_wmi_peer_assoc(struct ath10k *ar, const struct wmi_peer_assoc_complete_arg *arg) { diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 31866e3b74fc..01f4eb201330 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -1636,6 +1636,8 @@ ath10k_wmi_tlv_op_gen_start_scan(struct ath10k *ar, cmd->num_bssids = __cpu_to_le32(arg->n_bssids); cmd->ie_len = __cpu_to_le32(arg->ie_len); cmd->num_probes = __cpu_to_le32(3); + ether_addr_copy(cmd->mac_addr.addr, arg->mac_addr.addr); + ether_addr_copy(cmd->mac_mask.addr, arg->mac_mask.addr); /* FIXME: There are some scan flag inconsistencies across firmwares, * e.g. WMI-TLV inverts the logic behind the following flag. @@ -2483,6 +2485,27 @@ ath10k_wmi_tlv_op_gen_scan_chan_list(struct ath10k *ar, } static struct sk_buff * +ath10k_wmi_tlv_op_gen_scan_prob_req_oui(struct ath10k *ar, u32 prob_req_oui) +{ + struct wmi_scan_prob_req_oui_cmd *cmd; + struct wmi_tlv *tlv; + struct sk_buff *skb; + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*tlv) + sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + tlv = (void *)skb->data; + tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_SCAN_PROB_REQ_OUI_CMD); + tlv->len = __cpu_to_le16(sizeof(*cmd)); + cmd = (void *)tlv->value; + cmd->prob_req_oui = __cpu_to_le32(prob_req_oui); + + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv scan prob req oui\n"); + return skb; +} + +static struct sk_buff * ath10k_wmi_tlv_op_gen_beacon_dma(struct ath10k *ar, u32 vdev_id, const void *bcn, size_t bcn_len, u32 bcn_paddr, bool dtim_zero, @@ -3452,6 +3475,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = { .stop_scan_cmdid = WMI_TLV_STOP_SCAN_CMDID, .scan_chan_list_cmdid = WMI_TLV_SCAN_CHAN_LIST_CMDID, .scan_sch_prio_tbl_cmdid = WMI_TLV_SCAN_SCH_PRIO_TBL_CMDID, + .scan_prob_req_oui_cmdid = WMI_TLV_SCAN_PROB_REQ_OUI_CMDID, .pdev_set_regdomain_cmdid = WMI_TLV_PDEV_SET_REGDOMAIN_CMDID, .pdev_set_channel_cmdid = WMI_TLV_PDEV_SET_CHANNEL_CMDID, .pdev_set_param_cmdid = WMI_TLV_PDEV_SET_PARAM_CMDID, @@ -3820,6 +3844,7 @@ static const struct wmi_ops wmi_tlv_ops = { .gen_set_sta_ps = ath10k_wmi_tlv_op_gen_set_sta_ps, .gen_set_ap_ps = ath10k_wmi_tlv_op_gen_set_ap_ps, .gen_scan_chan_list = ath10k_wmi_tlv_op_gen_scan_chan_list, + .gen_scan_prob_req_oui = ath10k_wmi_tlv_op_gen_scan_prob_req_oui, .gen_beacon_dma = ath10k_wmi_tlv_op_gen_beacon_dma, .gen_pdev_set_wmm = ath10k_wmi_tlv_op_gen_pdev_set_wmm, .gen_request_stats = ath10k_wmi_tlv_op_gen_request_stats, diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index 529b91b17061..954c50bb3f66 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -1706,6 +1706,15 @@ struct wmi_tlv_scan_chan_list_cmd { __le32 num_scan_chans; } __packed; +struct wmi_scan_prob_req_oui_cmd { +/* OUI to be used in Probe Request frame when random MAC address is + * requested part of scan parameters. This is applied to both FW internal + * scans and host initiated scans. Host can request for random MAC address + * with WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ flag. + */ + __le32 prob_req_oui; +} __packed; + struct wmi_tlv_start_scan_cmd { struct wmi_start_scan_common common; __le32 burst_duration_ms; @@ -1714,6 +1723,8 @@ struct wmi_tlv_start_scan_cmd { __le32 num_ssids; __le32 ie_len; __le32 num_probes; + struct wmi_mac_addr mac_addr; + struct wmi_mac_addr mac_mask; } __packed; struct wmi_tlv_vdev_start_cmd { diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index fa07ef69122b..df2e92a6c9bd 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -42,6 +42,7 @@ static struct wmi_cmd_map wmi_cmd_map = { .stop_scan_cmdid = WMI_STOP_SCAN_CMDID, .scan_chan_list_cmdid = WMI_SCAN_CHAN_LIST_CMDID, .scan_sch_prio_tbl_cmdid = WMI_SCAN_SCH_PRIO_TBL_CMDID, + .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED, .pdev_set_regdomain_cmdid = WMI_PDEV_SET_REGDOMAIN_CMDID, .pdev_set_channel_cmdid = WMI_PDEV_SET_CHANNEL_CMDID, .pdev_set_param_cmdid = WMI_PDEV_SET_PARAM_CMDID, @@ -207,6 +208,7 @@ static struct wmi_cmd_map wmi_10x_cmd_map = { .stop_scan_cmdid = WMI_10X_STOP_SCAN_CMDID, .scan_chan_list_cmdid = WMI_10X_SCAN_CHAN_LIST_CMDID, .scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED, + .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED, .pdev_set_regdomain_cmdid = WMI_10X_PDEV_SET_REGDOMAIN_CMDID, .pdev_set_channel_cmdid = WMI_10X_PDEV_SET_CHANNEL_CMDID, .pdev_set_param_cmdid = WMI_10X_PDEV_SET_PARAM_CMDID, @@ -374,6 +376,7 @@ static struct wmi_cmd_map wmi_10_2_4_cmd_map = { .stop_scan_cmdid = WMI_10_2_STOP_SCAN_CMDID, .scan_chan_list_cmdid = WMI_10_2_SCAN_CHAN_LIST_CMDID, .scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED, + .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED, .pdev_set_regdomain_cmdid = WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, .pdev_set_channel_cmdid = WMI_10_2_PDEV_SET_CHANNEL_CMDID, .pdev_set_param_cmdid = WMI_10_2_PDEV_SET_PARAM_CMDID, @@ -541,6 +544,7 @@ static struct wmi_cmd_map wmi_10_4_cmd_map = { .stop_scan_cmdid = WMI_10_4_STOP_SCAN_CMDID, .scan_chan_list_cmdid = WMI_10_4_SCAN_CHAN_LIST_CMDID, .scan_sch_prio_tbl_cmdid = WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, + .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED, .pdev_set_regdomain_cmdid = WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, .pdev_set_channel_cmdid = WMI_10_4_PDEV_SET_CHANNEL_CMDID, .pdev_set_param_cmdid = WMI_10_4_PDEV_SET_PARAM_CMDID, @@ -1338,6 +1342,7 @@ static struct wmi_cmd_map wmi_10_2_cmd_map = { .stop_scan_cmdid = WMI_10_2_STOP_SCAN_CMDID, .scan_chan_list_cmdid = WMI_10_2_SCAN_CHAN_LIST_CMDID, .scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED, + .scan_prob_req_oui_cmdid = WMI_CMD_UNSUPPORTED, .pdev_set_regdomain_cmdid = WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, .pdev_set_channel_cmdid = WMI_10_2_PDEV_SET_CHANNEL_CMDID, .pdev_set_param_cmdid = WMI_10_2_PDEV_SET_PARAM_CMDID, diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 7e2f24fdcf1c..2705973e39c6 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -791,6 +791,7 @@ struct wmi_cmd_map { u32 stop_scan_cmdid; u32 scan_chan_list_cmdid; u32 scan_sch_prio_tbl_cmdid; + u32 scan_prob_req_oui_cmdid; u32 pdev_set_regdomain_cmdid; u32 pdev_set_channel_cmdid; u32 pdev_set_param_cmdid; @@ -3168,6 +3169,8 @@ struct wmi_start_scan_arg { u16 channels[64]; struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; + struct wmi_mac_addr mac_addr; + struct wmi_mac_addr mac_mask; }; /* scan control flags */ @@ -3191,6 +3194,12 @@ struct wmi_start_scan_arg { */ #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 +/* Use random MAC address for TA for Probe Request frame and add + * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. + * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. + */ +#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 + /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ #define WMI_SCAN_CLASS_MASK 0xFF000000 -- 2.11.0