From 6241226f68ea5285674adeb846a1a4544470724e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 28 Feb 2014 19:02:24 +0100 Subject: [PATCH] ath9k_hw: toggle weak signal detection in AP mode on older chipsets The commit 80b4205b "ath9k: Fix OFDM weak signal detection for AP mode" prevented weak signal detection changes from taking effect in AP mode on all chipsets, claiming it is "not allowed". The main reason for not disabling weak signal detection in AP mode is that typically beacon RSSI is used to track whether it is needed to boost range, and this is unavailable in AP mode for obvious reasons. The problem with not disabling weak signal detection is that older chipsets are very sensitive to high PHY error counts. When faced with heavy noise, this can lead to an excessive amount of "Failed to stop TX DMA" errors in the field. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index d28923b7435b..3227ee059813 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -176,16 +176,18 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel, if (ah->opmode == NL80211_IFTYPE_STATION && BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH) weak_sig = true; - /* - * OFDM Weak signal detection is always enabled for AP mode. + * Newer chipsets are better at dealing with high PHY error counts - + * keep weak signal detection enabled when no RSSI threshold is + * available to determine if it is needed (mode != STA) */ - if (ah->opmode != NL80211_IFTYPE_AP && - aniState->ofdmWeakSigDetect != weak_sig) { - ath9k_hw_ani_control(ah, - ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION, - entry_ofdm->ofdm_weak_signal_on); - } + else if (AR_SREV_9300_20_OR_LATER(ah) && + ah->opmode != NL80211_IFTYPE_STATION) + weak_sig = true; + + if (aniState->ofdmWeakSigDetect != weak_sig) + ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION, + weak_sig); if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) { ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH; -- 2.11.0