From 6468276b22069d4442aafcd8c59e5d8ccae23f5f Mon Sep 17 00:00:00 2001 From: Romain Baeriswyl Date: Mon, 20 Jan 2014 17:43:43 +0100 Subject: [PATCH] i2c: designware: make SCL and SDA falling time configurable This patch allows to set independantly SCL and SDA falling times. The tLOW period is computed by taking into account the SCL falling time. The tHIGH period is computed by taking into account the SDA falling time. For instance in case the margin on tLOW is considered too small, it can be increased by increasing the SCL falling time which is by default set at 300ns. The same applies for tHIGH period with the help of SDA falling time. Signed-off-by: Romain Baeriswyl Reviewed-by: Christian Ruppert Acked-by: Shinya Kuribayashi Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-designware.txt | 8 +++++++ drivers/i2c/busses/i2c-designware-core.c | 27 +++++++++++++--------- drivers/i2c/busses/i2c-designware-core.h | 2 ++ drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++++++ 4 files changed, 33 insertions(+), 11 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt index 7fd7fa25e9b0..5199b0c8cf7a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt @@ -14,6 +14,12 @@ Optional properties : - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds. This option is only supported in hardware blocks version 1.11a or newer. + - i2c-scl-falling-time : should contain the SCL falling time in nanoseconds. + This value which is by default 300ns is used to compute the tLOW period. + + - i2c-sda-falling-time : should contain the SDA falling time in nanoseconds. + This value which is by default 300ns is used to compute the tHIGH period. + Example : i2c@f0000 { @@ -34,4 +40,6 @@ Example : interrupts = <12 1>; clock-frequency = <400000>; i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <300>; + i2c-scl-falling-time-ns = <300>; }; diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 14c4b30d4ccc..22e92c3d3d07 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -218,7 +218,7 @@ i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) * * If your hardware is free from tHD;STA issue, try this one. */ - return (ic_clk * tSYMBOL + 5000) / 10000 - 8 + offset; + return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset; else /* * Conditional expression: @@ -234,7 +234,8 @@ i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) * The reason why we need to take into account "tf" here, * is the same as described in i2c_dw_scl_lcnt(). */ - return (ic_clk * (tSYMBOL + tf) + 5000) / 10000 - 3 + offset; + return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000 + - 3 + offset; } static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) @@ -250,7 +251,7 @@ static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) * account the fall time of SCL signal (tf). Default tf value * should be 0.3 us, for safety. */ - return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset; + return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset; } static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable) @@ -287,6 +288,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev) u32 input_clock_khz; u32 hcnt, lcnt; u32 reg; + u32 sda_falling_time, scl_falling_time; input_clock_khz = dev->get_clk_rate_khz(dev); @@ -308,15 +310,18 @@ int i2c_dw_init(struct dw_i2c_dev *dev) /* set standard and fast speed deviders for high/low periods */ + sda_falling_time = dev->sda_falling_time ?: 300; /* ns */ + scl_falling_time = dev->scl_falling_time ?: 300; /* ns */ + /* Standard-mode */ hcnt = i2c_dw_scl_hcnt(input_clock_khz, - 40, /* tHD;STA = tHIGH = 4.0 us */ - 3, /* tf = 0.3 us */ + 4000, /* tHD;STA = tHIGH = 4.0 us */ + sda_falling_time, 0, /* 0: DW default, 1: Ideal */ 0); /* No offset */ lcnt = i2c_dw_scl_lcnt(input_clock_khz, - 47, /* tLOW = 4.7 us */ - 3, /* tf = 0.3 us */ + 4700, /* tLOW = 4.7 us */ + scl_falling_time, 0); /* No offset */ /* Allow platforms to specify the ideal HCNT and LCNT values */ @@ -330,13 +335,13 @@ int i2c_dw_init(struct dw_i2c_dev *dev) /* Fast-mode */ hcnt = i2c_dw_scl_hcnt(input_clock_khz, - 6, /* tHD;STA = tHIGH = 0.6 us */ - 3, /* tf = 0.3 us */ + 600, /* tHD;STA = tHIGH = 0.6 us */ + sda_falling_time, 0, /* 0: DW default, 1: Ideal */ 0); /* No offset */ lcnt = i2c_dw_scl_lcnt(input_clock_khz, - 13, /* tLOW = 1.3 us */ - 3, /* tf = 0.3 us */ + 1300, /* tLOW = 1.3 us */ + scl_falling_time, 0); /* No offset */ if (dev->fs_hcnt && dev->fs_lcnt) { diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index e8a756537ed0..d66b6cbc9edc 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -99,6 +99,8 @@ struct dw_i2c_dev { unsigned int rx_fifo_depth; int rx_outstanding; u32 sda_hold_time; + u32 sda_falling_time; + u32 scl_falling_time; u16 ss_hcnt; u16 ss_lcnt; u16 fs_hcnt; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index d0bdac0498ce..fc243992b4b4 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -159,6 +159,13 @@ static int dw_i2c_probe(struct platform_device *pdev) "i2c-sda-hold-time-ns", &ht); dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000, 1000000); + + of_property_read_u32(pdev->dev.of_node, + "i2c-sda-falling-time-ns", + &dev->sda_falling_time); + of_property_read_u32(pdev->dev.of_node, + "i2c-scl-falling-time-ns", + &dev->scl_falling_time); } dev->functionality = -- 2.11.0