From 6508a50fe84f9858e8b59b53dce3847aaeeab744 Mon Sep 17 00:00:00 2001 From: Robert Schlabbach Date: Fri, 14 Jan 2022 07:43:48 +0000 Subject: [PATCH] media: dvb: add DVB-C2 and DVB-S2X parameter values Extend the DVB frontend parameter enums with additional values specified by the DVB-C2 (ETSI EN 302 769) and DVB-S2X (ETSI EN 302 307-2) standards to be ready for frontend drivers for such receivers. While most parameters will be "read-only" due to being autodetected by the receiver and only being reported back for informational purposes, the addition of SYS_DVBC2 to the delivery systems enum is required, because there are DVB-C2 capable receivers which are not capable of DVB-C/C2 autodetection and thus need this enum value to be explicitly instructed to search for a DVB-C2 signal. As for DVB-S2X, as that is an extension to DVB-S2, the same delivery system enum as for DVB-S2 can be used. Add the additional enum values and comments to the documentation. Link: https://lore.kernel.org/linux-media/trinity-1b7c5a66-85d4-4595-a690-0fde965d49b3-1642146228587@3c-app-gmx-bap69 Signed-off-by: Robert Schlabbach Signed-off-by: Mauro Carvalho Chehab --- .../media/dvb/fe_property_parameters.rst | 25 +++++---- include/uapi/linux/dvb/frontend.h | 59 +++++++++++++++++++++- 2 files changed, 74 insertions(+), 10 deletions(-) diff --git a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst index ecd84a8790a2..1717a0565fe8 100644 --- a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst +++ b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst @@ -89,16 +89,21 @@ ATSC (version 1) 8-VSB and 16-VSB. DMTB 4-QAM, 16-QAM, 32-QAM, 64-QAM and 4-QAM-NR. DVB-C Annex A/C 16-QAM, 32-QAM, 64-QAM and 256-QAM. DVB-C Annex B 64-QAM. +DVB-C2 QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM and 4096-QAM. DVB-T QPSK, 16-QAM and 64-QAM. DVB-T2 QPSK, 16-QAM, 64-QAM and 256-QAM. DVB-S No need to set. It supports only QPSK. DVB-S2 QPSK, 8-PSK, 16-APSK and 32-APSK. +DVB-S2X 8-APSK-L, 16-APSK-L, 32-APSK-L, 64-APSK and 64-APSK-L. ISDB-T QPSK, DQPSK, 16-QAM and 64-QAM. ISDB-S 8-PSK, QPSK and BPSK. ======================= ======================================================= .. note:: + As DVB-S2X specifies extensions to the DVB-S2 standard, the same + delivery system enum value is used (SYS_DVBS2). + Please notice that some of the above modulation types may not be defined currently at the Kernel. The reason is simple: no driver needed such definition yet. @@ -854,9 +859,10 @@ The acceptable values are defined by :c:type:`fe_guard_interval`. #. If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the hardware will try to find the correct guard interval (if capable) and will use TMCC to fill in the missing parameters. - #. Intervals ``GUARD_INTERVAL_1_128``, ``GUARD_INTERVAL_19_128`` - and ``GUARD_INTERVAL_19_256`` are used only for DVB-T2 at - present. + #. Interval ``GUARD_INTERVAL_1_64`` is used only for DVB-C2. + #. Interval ``GUARD_INTERVAL_1_128`` is used for both DVB-C2 and DVB_T2. + #. Intervals ``GUARD_INTERVAL_19_128`` and ``GUARD_INTERVAL_19_256`` are + used only for DVB-T2. #. Intervals ``GUARD_INTERVAL_PN420``, ``GUARD_INTERVAL_PN595`` and ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present. On such standard, only those intervals and ``GUARD_INTERVAL_AUTO`` @@ -916,14 +922,15 @@ The acceptable values are defined by :c:type:`fe_hierarchy`. DTV_STREAM_ID ============= -Used on DVB-S2, DVB-T2 and ISDB-S. +Used on DVB-C2, DVB-S2, DVB-T2 and ISDB-S. -DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on -a single transport stream. This property enables the digital TV driver to -handle substream filtering, when supported by the hardware. By default, -substream filtering is disabled. +DVB-C2, DVB-S2, DVB-T2 and ISDB-S support the transmission of several +streams on a single transport stream. This property enables the digital +TV driver to handle substream filtering, when supported by the hardware. +By default, substream filtering is disabled. -For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. +For DVB-C2, DVB-S2 and DVB-T2, the valid substream id range is from 0 to +255. For ISDB, the valid substream id range is from 1 to 65535. diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index 4f9b4551c534..4fed9e316147 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -296,6 +296,22 @@ enum fe_spectral_inversion { * @FEC_3_5: Forward Error Correction Code 3/5 * @FEC_9_10: Forward Error Correction Code 9/10 * @FEC_2_5: Forward Error Correction Code 2/5 + * @FEC_1_3: Forward Error Correction Code 1/3 + * @FEC_1_4: Forward Error Correction Code 1/4 + * @FEC_5_9: Forward Error Correction Code 5/9 + * @FEC_7_9: Forward Error Correction Code 7/9 + * @FEC_8_15: Forward Error Correction Code 8/15 + * @FEC_11_15: Forward Error Correction Code 11/15 + * @FEC_13_18: Forward Error Correction Code 13/18 + * @FEC_9_20: Forward Error Correction Code 9/20 + * @FEC_11_20: Forward Error Correction Code 11/20 + * @FEC_23_36: Forward Error Correction Code 23/36 + * @FEC_25_36: Forward Error Correction Code 25/36 + * @FEC_13_45: Forward Error Correction Code 13/45 + * @FEC_26_45: Forward Error Correction Code 26/45 + * @FEC_28_45: Forward Error Correction Code 28/45 + * @FEC_32_45: Forward Error Correction Code 32/45 + * @FEC_77_90: Forward Error Correction Code 77/90 * * Please note that not all FEC types are supported by a given standard. */ @@ -313,6 +329,22 @@ enum fe_code_rate { FEC_3_5, FEC_9_10, FEC_2_5, + FEC_1_3, + FEC_1_4, + FEC_5_9, + FEC_7_9, + FEC_8_15, + FEC_11_15, + FEC_13_18, + FEC_9_20, + FEC_11_20, + FEC_23_36, + FEC_25_36, + FEC_13_45, + FEC_26_45, + FEC_28_45, + FEC_32_45, + FEC_77_90, }; /** @@ -331,6 +363,13 @@ enum fe_code_rate { * @APSK_32: 32-APSK modulation * @DQPSK: DQPSK modulation * @QAM_4_NR: 4-QAM-NR modulation + * @QAM-1024: 1024-QAM modulation + * @QAM-4096: 4096-QAM modulation + * @APSK_8_L: 8APSK-L modulation + * @APSK_16_L: 16APSK-L modulation + * @APSK_32_L: 32APSK-L modulation + * @APSK_64: 64APSK modulation + * @APSK_64_L: 64APSK-L modulation * * Please note that not all modulations are supported by a given standard. * @@ -350,6 +389,13 @@ enum fe_modulation { APSK_32, DQPSK, QAM_4_NR, + QAM_1024, + QAM_4096, + APSK_8_L, + APSK_16_L, + APSK_32_L, + APSK_64, + APSK_64_L, }; /** @@ -404,6 +450,7 @@ enum fe_transmit_mode { * @GUARD_INTERVAL_PN420: PN length 420 (1/4) * @GUARD_INTERVAL_PN595: PN length 595 (1/6) * @GUARD_INTERVAL_PN945: PN length 945 (1/9) + * @GUARD_INTERVAL_1_64: Guard interval 1/64 * * Please note that not all guard intervals are supported by a given standard. */ @@ -419,6 +466,7 @@ enum fe_guard_interval { GUARD_INTERVAL_PN420, GUARD_INTERVAL_PN595, GUARD_INTERVAL_PN945, + GUARD_INTERVAL_1_64, }; /** @@ -571,6 +619,9 @@ enum fe_pilot { * @ROLLOFF_20: Roloff factor: α=20% * @ROLLOFF_25: Roloff factor: α=25% * @ROLLOFF_AUTO: Auto-detect the roloff factor. + * @ROLLOFF_15: Rolloff factor: α=15% + * @ROLLOFF_10: Rolloff factor: α=10% + * @ROLLOFF_5: Rolloff factor: α=5% * * .. note: * @@ -581,6 +632,9 @@ enum fe_rolloff { ROLLOFF_20, ROLLOFF_25, ROLLOFF_AUTO, + ROLLOFF_15, + ROLLOFF_10, + ROLLOFF_5, }; /** @@ -594,6 +648,8 @@ enum fe_rolloff { * Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM) * @SYS_DVBC_ANNEX_C: * Cable TV: DVB-C following ITU-T J.83 Annex C spec + * @SYS_DVBC2: + * Cable TV: DVB-C2 * @SYS_ISDBC: * Cable TV: ISDB-C (no drivers yet) * @SYS_DVBT: @@ -611,7 +667,7 @@ enum fe_rolloff { * @SYS_DVBS: * Satellite TV: DVB-S * @SYS_DVBS2: - * Satellite TV: DVB-S2 + * Satellite TV: DVB-S2 and DVB-S2X * @SYS_TURBO: * Satellite TV: DVB-S Turbo * @SYS_ISDBS: @@ -645,6 +701,7 @@ enum fe_delivery_system { SYS_DVBT2, SYS_TURBO, SYS_DVBC_ANNEX_C, + SYS_DVBC2, }; /* backward compatibility definitions for delivery systems */ -- 2.11.0