From 6771ea1fff988651593f78c122bc02e80f5100a0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Mar 2010 22:17:13 +0100 Subject: [PATCH] hwmon: (lm90) Add support for the Winbond/Nuvoton W83L771AWG/ASG This chips is found on several Zotac Ion ITX boards, amongst others. Signed-off-by: Jean Delvare Cc: MC Matti Cc: Manuel Lamotte-Schubert --- Documentation/hwmon/lm90 | 10 ++++++++++ drivers/hwmon/Kconfig | 5 +++-- drivers/hwmon/lm90.c | 12 +++++++++++- 3 files changed, 24 insertions(+), 3 deletions(-) diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 93d8e3d55150..08106ad7089c 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -84,6 +84,10 @@ Supported chips: Addresses scanned: I2C 0x4c Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + * Winbond/Nuvoton W83L771AWG/ASG + Prefix: 'w83l771' + Addresses scanned: I2C 0x4c + Datasheet: Not publicly available, can be requested from Nuvoton Author: Jean Delvare @@ -147,6 +151,12 @@ MAX6680 and MAX6681: * Selectable address * Remote sensor type selection +W83L771AWG/ASG + * The AWG and ASG variants only differ in package format. + * Filter and alert configuration register at 0xBF + * Diode ideality factor configuration (remote sensor) at 0xE3 + * Moving average (depending on conversion rate) + All temperature values are given in degrees Celsius. Resolution is 1.0 degree for the local temperature, 0.125 degree for the remote temperature, except for the MAX6657, MAX6658 and MAX6659 which have a diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 68cf87749a42..9234c2e2c7d9 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -563,9 +563,10 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim + LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, - MAX6680, MAX6681 and MAX6692 sensor chips. + MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG + sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 7c9bdc167426..ddf617f3a713 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -93,7 +93,8 @@ static const unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; -enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646 }; +enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646, + w83l771 }; /* * The LM90 registers @@ -173,6 +174,7 @@ static const struct i2c_device_id lm90_id[] = { { "max6659", max6657 }, { "max6680", max6680 }, { "max6681", max6680 }, + { "w83l771", w83l771 }, { } }; MODULE_DEVICE_TABLE(i2c, lm90_id); @@ -758,6 +760,14 @@ static int lm90_detect(struct i2c_client *new_client, && reg_convrate <= 0x07) { name = "max6646"; } + } else + if (address == 0x4C + && man_id == 0x5C) { /* Winbond/Nuvoton */ + if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */ + && (reg_config1 & 0x2A) == 0x00 + && reg_convrate <= 0x08) { + name = "w83l771"; + } } if (!name) { /* identification failed */ -- 2.11.0