From 6990640a93ba4e76dd62ca3ea1082a7354db09d7 Mon Sep 17 00:00:00 2001 From: Marijn Suijten Date: Sun, 8 May 2022 12:03:33 +0200 Subject: [PATCH] arm64: dts: qcom: sm6125: Move sdc2 pinctrl from seine-pdx201 to sm6125 Both the sdc2-on and sdc2-off pinctrl nodes are used by the sdhci@4784000 node in sm6125.dtsi. Surprisingly sdc2-off is defined in sm6125, yet its sdc2-on counterpart is only defined in board-specific DT for the Sony Seine PDX201 board/device resulting in an "undefined label &sdc2_state_on" error if sm6125.dtsi were included elsewhere. This sm6125 base dtsi should not rely on externally defined labels; the properties referencing it should then also be written externally. Since the sdc2-on pin configuration is board-independent just like sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi. The SDCard-detect pin (gpio98) is however board-specific, and remains as an overwrite in seine-pdx201.dts for both the on and off state. As a drive-by cleanup, reorder bias- and drive-strength properties. Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125") Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II") Signed-off-by: Marijn Suijten Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220508100336.127176-1-marijn.suijten@somainline.org --- .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 34 +++++----------------- arch/arm64/boot/dts/qcom/sm6125.dtsi | 24 +++++++++++++-- 2 files changed, 30 insertions(+), 28 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index c9f195649954..8c05528df543 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -89,8 +89,16 @@ &sdc2_state_off { sd-cd { pins = "gpio98"; + drive-strength = <2>; bias-disable; + }; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio98"; drive-strength = <2>; + bias-pull-up; }; }; @@ -100,32 +108,6 @@ &tlmm { gpio-reserved-ranges = <22 2>, <28 6>; - - sdc2_state_on: sdc2-on { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - - sd-cd { - pins = "gpio98"; - bias-pull-up; - drive-strength = <2>; - }; - }; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 94e427abbfd2..39b17d4438fe 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -389,20 +389,40 @@ sdc2_state_off: sdc2-off { clk { pins = "sdc2_clk"; - bias-disable; drive-strength = <2>; + bias-disable; }; cmd { pins = "sdc2_cmd"; + drive-strength = <2>; bias-pull-up; + }; + + data { + pins = "sdc2_data"; drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_state_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; }; data { pins = "sdc2_data"; + drive-strength = <10>; bias-pull-up; - drive-strength = <2>; }; }; }; -- 2.11.0