From 6a4f1b41357d2bd65d39f7a5d44e92f69daaf04b Mon Sep 17 00:00:00 2001 From: Duncan Sands Date: Thu, 5 Oct 2006 10:40:55 +0200 Subject: [PATCH] speedtch: "extended reach" The speedtouch modem setup code was reverse engineered many years ago from a prehistoric windows driver. Less ancient windows drivers, even those from a few years ago, perform extra initialization steps which this patch adds to the linux driver. David Woodhouse observed that this initialization along with the firmware bin/sachu3/zzzlp2.eni from the driver at http://www.speedtouch.co.uk/downloads/330/301/UK3012%20Extended.zip improves line sync speeds by about 20%. He provided the original patch, which I've modified to use symbolic names (BMaxDSL, ModemMode, ModemOption) rather than magic numbers. These names may not seem like much of an improvement (after all, what is "ModemOption" exactly?), but they do have one big advantage: they are the names used in the windows registry. I've made them available as module parameters. Thanks are due to Aurelio Arroyo, who noticed the relationship between these magic numbers and the entries in Phonebook.ini. Signed-off-by: Duncan Sands Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/speedtch.c | 93 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 77 insertions(+), 16 deletions(-) diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 7c7b507af29d..c870c804470f 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -55,7 +55,6 @@ static const char speedtch_driver_name[] = "speedtch"; #define OFFSET_d 9 /* size 4 */ #define OFFSET_e 13 /* size 1 */ #define OFFSET_f 14 /* size 1 */ -#define TOTAL 15 #define SIZE_7 1 #define SIZE_b 8 @@ -79,6 +78,18 @@ static int dl_512_first = DEFAULT_DL_512_FIRST; static int enable_isoc = DEFAULT_ENABLE_ISOC; static int sw_buffering = DEFAULT_SW_BUFFERING; +#define DEFAULT_B_MAX_DSL 8128 +#define DEFAULT_MODEM_MODE 11 +#define MODEM_OPTION_LENGTH 16 +static const unsigned char DEFAULT_MODEM_OPTION[MODEM_OPTION_LENGTH] = { + 0x10, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static unsigned int BMaxDSL = DEFAULT_B_MAX_DSL; +static unsigned char ModemMode = DEFAULT_MODEM_MODE; +static unsigned char ModemOption[MODEM_OPTION_LENGTH]; +static int num_ModemOption; + module_param(altsetting, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(altsetting, "Alternative setting for data interface (bulk_default: " @@ -100,6 +111,17 @@ MODULE_PARM_DESC(sw_buffering, "Enable software buffering (default: " __MODULE_STRING(DEFAULT_SW_BUFFERING) ")"); +module_param(BMaxDSL, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(BMaxDSL, + "default: " __MODULE_STRING(DEFAULT_B_MAX_DSL)); + +module_param(ModemMode, byte, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ModemMode, + "default: " __MODULE_STRING(DEFAULT_MODEM_MODE)); + +module_param_array(ModemOption, byte, &num_ModemOption, S_IRUGO); +MODULE_PARM_DESC(ModemOption, "default: 0x10,0x00,0x00,0x00,0x20"); + #define INTERFACE_DATA 1 #define ENDPOINT_INT 0x81 #define ENDPOINT_BULK_DATA 0x07 @@ -108,10 +130,17 @@ MODULE_PARM_DESC(sw_buffering, #define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) ) +struct speedtch_params { + unsigned int altsetting; + unsigned int BMaxDSL; + unsigned char ModemMode; + unsigned char ModemOption[MODEM_OPTION_LENGTH]; +}; + struct speedtch_instance_data { struct usbatm_data *usbatm; - unsigned int altsetting; + struct speedtch_params params; /* set in probe, constant afterwards */ struct work_struct status_checker; @@ -123,7 +152,7 @@ struct speedtch_instance_data { struct urb *int_urb; unsigned char int_data[16]; - unsigned char scratch_buffer[TOTAL]; + unsigned char scratch_buffer[16]; }; /*************** @@ -186,6 +215,34 @@ static void speedtch_test_sequence(struct speedtch_instance_data *instance) 0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT); if (ret < 0) usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret); + + /* Extra initialisation in recent drivers - gives higher speeds */ + + /* URBext1 */ + buf[0] = instance->params.ModemMode; + ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + 0x01, 0x40, 0x11, 0x00, buf, 1, CTRL_TIMEOUT); + if (ret < 0) + usb_warn(usbatm, "%s failed on URBext1: %d\n", __func__, ret); + + /* URBext2 */ + /* This seems to be the one which actually triggers the higher sync + rate -- it does require the new firmware too, although it works OK + with older firmware */ + ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + 0x01, 0x40, 0x14, 0x00, + instance->params.ModemOption, + MODEM_OPTION_LENGTH, CTRL_TIMEOUT); + if (ret < 0) + usb_warn(usbatm, "%s failed on URBext2: %d\n", __func__, ret); + + /* URBext3 */ + buf[0] = instance->params.BMaxDSL & 0xff; + buf[1] = instance->params.BMaxDSL >> 8; + ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + 0x01, 0x40, 0x12, 0x00, buf, 2, CTRL_TIMEOUT); + if (ret < 0) + usb_warn(usbatm, "%s failed on URBext3: %d\n", __func__, ret); } static int speedtch_upload_firmware(struct speedtch_instance_data *instance, @@ -285,8 +342,8 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance, because we're in our own kernel thread anyway. */ msleep_interruptible(1000); - if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) { - usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->altsetting, ret); + if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) { + usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->params.altsetting, ret); goto out_free; } @@ -372,7 +429,7 @@ static int speedtch_read_status(struct speedtch_instance_data *instance) unsigned char *buf = instance->scratch_buffer; int ret; - memset(buf, 0, TOTAL); + memset(buf, 0, 16); ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7, @@ -746,17 +803,21 @@ static int speedtch_bind(struct usbatm_data *usbatm, instance->usbatm = usbatm; - /* altsetting and enable_isoc may change at any moment, so take a snapshot */ - instance->altsetting = altsetting; + /* module parameters may change at any moment, so take a snapshot */ + instance->params.altsetting = altsetting; + instance->params.BMaxDSL = BMaxDSL; + instance->params.ModemMode = ModemMode; + memcpy(instance->params.ModemOption, DEFAULT_MODEM_OPTION, MODEM_OPTION_LENGTH); + memcpy(instance->params.ModemOption, ModemOption, num_ModemOption); use_isoc = enable_isoc; - if (instance->altsetting) - if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) { - usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->altsetting, ret); - instance->altsetting = 0; /* fall back to default */ + if (instance->params.altsetting) + if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) { + usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->params.altsetting, ret); + instance->params.altsetting = 0; /* fall back to default */ } - if (!instance->altsetting && use_isoc) + if (!instance->params.altsetting && use_isoc) if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) { usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret); use_isoc = 0; /* fall back to bulk */ @@ -783,14 +844,14 @@ static int speedtch_bind(struct usbatm_data *usbatm, usb_info(usbatm, "isochronous transfer not supported - using bulk\n"); } - if (!use_isoc && !instance->altsetting) + if (!use_isoc && !instance->params.altsetting) if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) { usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret); goto fail_free; } - if (!instance->altsetting) - instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING; + if (!instance->params.altsetting) + instance->params.altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING; usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0); -- 2.11.0