From 6d7bdd328da42cd08bc98f6d1bcc402c68eed33e Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Sun, 11 Feb 2018 22:15:05 +0100 Subject: [PATCH] ARM: dts: omap4-droid4: update touchscreen Update the Droid 4 devicetree to properly describe the reset GPIO. Also rename the node to touchscreen instead of tsp, which seems to be commonly used for touchscreens. Signed-off-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index b21084da490b..65c2cc6a9a30 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -124,13 +124,6 @@ }; &gpio6 { - touchscreen_reset { - gpio-hog; - gpios = <13 0>; - output-high; - line-name = "touchscreen-reset"; - }; - pwm8: dmtimer-pwm-8 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_direction_pin>; @@ -362,22 +355,18 @@ }; }; -/* - * REVISIT: Add gpio173 reset pin handling to the driver, see gpio-hog above. - * If the GPIO reset is used, we probably need to have /lib/firmware/maxtouch.fw - * available. See "mxt-app" and "droid4-touchscreen-firmware" tools for more - * information. - */ &i2c2 { - tsp@4a { + touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ + /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING - &omap4_pmx_core 0x160>; + interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, + <&omap4_pmx_core 0x160>; interrupt-names = "irq", "wakeup"; wakeup-source; }; @@ -435,6 +424,7 @@ touchscreen_pins: pinmux_touchscreen_pins { pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) >; }; -- 2.11.0