From 72fb2c852188ad75ab3badb55bf491925b9eba46 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 17 Jul 2017 18:03:01 +0200 Subject: [PATCH] ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition The libretech CC derives less from the p212 than initially thought. Several voltage regulators are different and the capabilities of the sdcard and emmc also differ. Deriving from the p212 is not convient anymore so the libretech is now derived from s905x definition directly. Fixes: cd84aff1d981 ("ARM64: dts: meson-gxl: Add Libre Technology CC support") Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 103 ++++++++++++++++++--- 1 file changed, 91 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 890821d6e52b..266fbcf3e47f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -10,12 +10,20 @@ #include -#include "meson-gxl-s905x-p212.dtsi" +#include "meson-gxl-s905x.dtsi" / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; model = "Libre Technology CC"; + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cvbs-connector { compatible = "composite-video-connector"; @@ -26,6 +34,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -53,6 +66,39 @@ linux,default-trigger = "heartbeat"; }; }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-gpio"; + + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cvbs_vdac_port { @@ -61,6 +107,16 @@ }; }; +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -73,20 +129,43 @@ }; }; -/* - * The following devices exists but are exposed on the general - * purpose GPIO header. End user may well decide to use those pins - * for another purpose - */ +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; -&sd_emmc_a { - status = "disabled"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_card>; }; -&uart_A { - status = "disabled"; +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <50000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; }; -&wifi32k { - status = "disabled"; +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; -- 2.11.0