From 7428022b50d0fbb4846dd0f00639ea09d36dff02 Mon Sep 17 00:00:00 2001 From: DENG Qingfang Date: Wed, 11 Aug 2021 17:50:43 +0800 Subject: [PATCH] net: dsa: mt7530: fix VLAN traffic leaks again When a port leaves a VLAN-aware bridge, the current code does not clear other ports' matrix field bit. If the bridge is later set to VLAN-unaware mode, traffic in the bridge may leak to that port. Remove the VLAN filtering check in mt7530_port_bridge_leave. Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks") Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 53e6150e95b6..77e0205e4e59 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1315,11 +1315,8 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port, /* Remove this port from the port matrix of the other ports * in the same bridge. If the port is disabled, port matrix * is kept and not being setup until the port becomes enabled. - * And the other port's port matrix cannot be broken when the - * other port is still a VLAN-aware port. */ - if (dsa_is_user_port(ds, i) && i != port && - !dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { + if (dsa_is_user_port(ds, i) && i != port) { if (dsa_to_port(ds, i)->bridge_dev != bridge) continue; if (priv->ports[i].enable) -- 2.11.0