From 78cbcc38b9043a736ca97577bd47a2d291c67981 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 3 Sep 2020 10:00:41 +0200 Subject: [PATCH] drm/vc4: crtc: Move the cob allocation outside of bind The COB allocation depends on the HVS channel used for a given pixelvalve. While the channel allocation was entirely static in vc4, vc5 changes that and at bind time, a pixelvalve can be assigned to multiple HVS channels. Let's prepare that rework by allocating the COB when it's actually needed. Signed-off-by: Maxime Ripard Tested-by: Chanwoo Choi Tested-by: Hoegeun Kwon Tested-by: Stefan Wahren Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/484cbd4b00cfeee425295df438222258cc39a3dd.1599120059.git-series.maxime@cerno.tech --- drivers/gpu/drm/vc4/vc4_crtc.c | 35 +++++++++++++++++------------------ drivers/gpu/drm/vc4/vc4_drv.h | 2 -- 2 files changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index 9faae22cb0f8..fdecaba77836 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -65,6 +65,20 @@ static const struct debugfs_reg32 crtc_regs[] = { VC4_REG32(PV_HACT_ACT), }; +static unsigned int +vc4_crtc_get_cob_allocation(struct vc4_dev *vc4, unsigned int channel) +{ + u32 dispbase = HVS_READ(SCALER_DISPBASEX(channel)); + /* Top/base are supposed to be 4-pixel aligned, but the + * Raspberry Pi firmware fills the low bits (which are + * presumably ignored). + */ + u32 top = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_TOP) & ~3; + u32 base = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_BASE) & ~3; + + return top - base + 4; +} + static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc, bool in_vblank_irq, int *vpos, int *hpos, @@ -74,6 +88,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; struct vc4_dev *vc4 = to_vc4_dev(dev); struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + unsigned int cob_size; u32 val; int fifo_lines; int vblank_lines; @@ -109,8 +124,9 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc, *hpos += mode->crtc_htotal / 2; } + cob_size = vc4_crtc_get_cob_allocation(vc4, vc4_crtc->channel); /* This is the offset we need for translating hvs -> pv scanout pos. */ - fifo_lines = vc4_crtc->cob_size / mode->crtc_hdisplay; + fifo_lines = cob_size / mode->crtc_hdisplay; if (fifo_lines > 0) ret = true; @@ -823,22 +839,6 @@ static void vc4_set_crtc_possible_masks(struct drm_device *drm, } } -static void -vc4_crtc_get_cob_allocation(struct vc4_crtc *vc4_crtc) -{ - struct drm_device *drm = vc4_crtc->base.dev; - struct vc4_dev *vc4 = to_vc4_dev(drm); - u32 dispbase = HVS_READ(SCALER_DISPBASEX(vc4_crtc->channel)); - /* Top/base are supposed to be 4-pixel aligned, but the - * Raspberry Pi firmware fills the low bits (which are - * presumably ignored). - */ - u32 top = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_TOP) & ~3; - u32 base = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_BASE) & ~3; - - vc4_crtc->cob_size = top - base + 4; -} - int vc4_crtc_init(struct drm_device *drm, struct vc4_crtc *vc4_crtc, const struct drm_crtc_funcs *crtc_funcs, const struct drm_crtc_helper_funcs *crtc_helper_funcs) @@ -870,7 +870,6 @@ int vc4_crtc_init(struct drm_device *drm, struct vc4_crtc *vc4_crtc, * implemented as private driver state in vc4_kms, not here. */ drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size); - vc4_crtc_get_cob_allocation(vc4_crtc); for (i = 0; i < crtc->gamma_size; i++) { vc4_crtc->lut_r[i] = i; diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h index 0bc150daafb2..d80fc3bbb450 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.h +++ b/drivers/gpu/drm/vc4/vc4_drv.h @@ -477,8 +477,6 @@ struct vc4_crtc { u8 lut_r[256]; u8 lut_g[256]; u8 lut_b[256]; - /* Size in pixels of the COB memory allocated to this CRTC. */ - u32 cob_size; struct drm_pending_vblank_event *event; -- 2.11.0