From 790de7ddd1d7ba455ff5a4fd8412290a1bf76301 Mon Sep 17 00:00:00 2001 From: Ulrich Weigand Date: Fri, 22 Jun 2007 12:47:48 +0000 Subject: [PATCH] * infrun.c (adjust_pc_after_break): Do not assume software single-step is always active if SOFTWARE_SINGLE_STEP_P is true. (resume): Use gdbarch_software_single_step[_p] instead of SOFTWARE_SINGLE_STEP[_P]. (handle_inferior_event): Do not check for SOFTWARE_SINGLE_STEP_P. * gdbarch.sh (software_single_step): Remove target macro. * gdbarch.h, gdbarch.c: Regenerate. --- gdb/ChangeLog | 11 ++++++++ gdb/gdbarch.c | 12 -------- gdb/gdbarch.h | 19 ------------- gdb/gdbarch.sh | 2 +- gdb/infrun.c | 88 +++++++++++++++++++++++----------------------------------- 5 files changed, 46 insertions(+), 86 deletions(-) diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 0fb25edd14..e9ea35ba83 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,16 @@ 2007-06-22 Ulrich Weigand + * infrun.c (adjust_pc_after_break): Do not assume software single-step + is always active if SOFTWARE_SINGLE_STEP_P is true. + (resume): Use gdbarch_software_single_step[_p] instead of + SOFTWARE_SINGLE_STEP[_P]. + (handle_inferior_event): Do not check for SOFTWARE_SINGLE_STEP_P. + + * gdbarch.sh (software_single_step): Remove target macro. + * gdbarch.h, gdbarch.c: Regenerate. + +2007-06-22 Ulrich Weigand + * gdbarch.sh (gdbarch_swap_ftype, deprecated_register_gdbarch_swap, DEPRECATED_REGISTER_GDBARCH_SWAP): Remove. (struct gdbarch_swap, struct gdbarch_swap_registration, diff --git a/gdb/gdbarch.c b/gdb/gdbarch.c index 37a78616fc..825ce1c124 100644 --- a/gdb/gdbarch.c +++ b/gdb/gdbarch.c @@ -976,21 +976,9 @@ gdbarch_dump (struct gdbarch *current_gdbarch, struct ui_file *file) fprintf_unfiltered (file, "gdbarch_dump: smash_text_address = <0x%lx>\n", (long) current_gdbarch->smash_text_address); -#ifdef SOFTWARE_SINGLE_STEP_P - fprintf_unfiltered (file, - "gdbarch_dump: %s # %s\n", - "SOFTWARE_SINGLE_STEP_P()", - XSTRING (SOFTWARE_SINGLE_STEP_P ())); -#endif fprintf_unfiltered (file, "gdbarch_dump: gdbarch_software_single_step_p() = %d\n", gdbarch_software_single_step_p (current_gdbarch)); -#ifdef SOFTWARE_SINGLE_STEP - fprintf_unfiltered (file, - "gdbarch_dump: %s # %s\n", - "SOFTWARE_SINGLE_STEP(frame)", - XSTRING (SOFTWARE_SINGLE_STEP (frame))); -#endif fprintf_unfiltered (file, "gdbarch_dump: software_single_step = <0x%lx>\n", (long) current_gdbarch->software_single_step); diff --git a/gdb/gdbarch.h b/gdb/gdbarch.h index b9b2ae926f..aed8f9cb4d 100644 --- a/gdb/gdbarch.h +++ b/gdb/gdbarch.h @@ -526,30 +526,11 @@ extern void set_gdbarch_smash_text_address (struct gdbarch *gdbarch, gdbarch_sma A return value of 1 means that the software_single_step breakpoints were inserted; 0 means they were not. */ -#if defined (SOFTWARE_SINGLE_STEP) -/* Legacy for systems yet to multi-arch SOFTWARE_SINGLE_STEP */ -#if !defined (SOFTWARE_SINGLE_STEP_P) -#define SOFTWARE_SINGLE_STEP_P() (1) -#endif -#endif - extern int gdbarch_software_single_step_p (struct gdbarch *gdbarch); -#if !defined (GDB_TM_FILE) && defined (SOFTWARE_SINGLE_STEP_P) -#error "Non multi-arch definition of SOFTWARE_SINGLE_STEP" -#endif -#if !defined (SOFTWARE_SINGLE_STEP_P) -#define SOFTWARE_SINGLE_STEP_P() (gdbarch_software_single_step_p (current_gdbarch)) -#endif typedef int (gdbarch_software_single_step_ftype) (struct frame_info *frame); extern int gdbarch_software_single_step (struct gdbarch *gdbarch, struct frame_info *frame); extern void set_gdbarch_software_single_step (struct gdbarch *gdbarch, gdbarch_software_single_step_ftype *software_single_step); -#if !defined (GDB_TM_FILE) && defined (SOFTWARE_SINGLE_STEP) -#error "Non multi-arch definition of SOFTWARE_SINGLE_STEP" -#endif -#if !defined (SOFTWARE_SINGLE_STEP) -#define SOFTWARE_SINGLE_STEP(frame) (gdbarch_software_single_step (current_gdbarch, frame)) -#endif /* Return non-zero if the processor is executing a delay slot and a further single-step is needed before the instruction finishes. */ diff --git a/gdb/gdbarch.sh b/gdb/gdbarch.sh index 1c1bd734aa..0c3f0888fe 100755 --- a/gdb/gdbarch.sh +++ b/gdb/gdbarch.sh @@ -582,7 +582,7 @@ f::CORE_ADDR:smash_text_address:CORE_ADDR addr:addr::core_addr_identity::0 # # A return value of 1 means that the software_single_step breakpoints # were inserted; 0 means they were not. -F:=:int:software_single_step:struct frame_info *frame:frame +F::int:software_single_step:struct frame_info *frame:frame # Return non-zero if the processor is executing a delay slot and a # further single-step is needed before the instruction finishes. diff --git a/gdb/infrun.c b/gdb/infrun.c index 27d78b13fd..346e6c8634 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -537,10 +537,10 @@ how to step past a permanent breakpoint on this architecture. Try using\n\ a command like `return' or `jump' to continue execution.")); } - if (SOFTWARE_SINGLE_STEP_P () && step) + if (step && gdbarch_software_single_step_p (current_gdbarch)) { /* Do it the hard way, w/temp breakpoints */ - if (SOFTWARE_SINGLE_STEP (get_current_frame ())) + if (gdbarch_software_single_step (current_gdbarch, get_current_frame ())) { /* ...and don't ask hardware to do it. */ step = 0; @@ -1190,52 +1190,33 @@ adjust_pc_after_break (struct execution_control_state *ecs) breakpoint_pc = read_pc_pid (ecs->ptid) - gdbarch_decr_pc_after_break (current_gdbarch); - if (SOFTWARE_SINGLE_STEP_P ()) - { - /* When using software single-step, a SIGTRAP can only indicate - an inserted breakpoint. This actually makes things - easier. */ - if (singlestep_breakpoints_inserted_p) - /* When software single stepping, the instruction at [prev_pc] - is never a breakpoint, but the instruction following - [prev_pc] (in program execution order) always is. Assume - that following instruction was reached and hence a software - breakpoint was hit. */ - write_pc_pid (breakpoint_pc, ecs->ptid); - else if (software_breakpoint_inserted_here_p (breakpoint_pc)) - /* The inferior was free running (i.e., no single-step - breakpoints inserted) and it hit a software breakpoint. */ - write_pc_pid (breakpoint_pc, ecs->ptid); - } - else + /* Check whether there actually is a software breakpoint inserted + at that location. */ + if (software_breakpoint_inserted_here_p (breakpoint_pc)) { - /* When using hardware single-step, a SIGTRAP is reported for - both a completed single-step and a software breakpoint. Need - to differentiate between the two as the latter needs - adjusting but the former does not. + /* When using hardware single-step, a SIGTRAP is reported for both + a completed single-step and a software breakpoint. Need to + differentiate between the two, as the latter needs adjusting + but the former does not. - When the thread to be examined does not match the current thread - context we can't use currently_stepping, so assume no - single-stepping in this case. */ - if (ptid_equal (ecs->ptid, inferior_ptid) && currently_stepping (ecs)) - { - if (prev_pc == breakpoint_pc - && software_breakpoint_inserted_here_p (breakpoint_pc)) - /* Hardware single-stepped a software breakpoint (as - occures when the inferior is resumed with PC pointing - at not-yet-hit software breakpoint). Since the - breakpoint really is executed, the inferior needs to be - backed up to the breakpoint address. */ - write_pc_pid (breakpoint_pc, ecs->ptid); - } - else - { - if (software_breakpoint_inserted_here_p (breakpoint_pc)) - /* The inferior was free running (i.e., no hardware - single-step and no possibility of a false SIGTRAP) and - hit a software breakpoint. */ - write_pc_pid (breakpoint_pc, ecs->ptid); - } + The SIGTRAP can be due to a completed hardware single-step only if + - we didn't insert software single-step breakpoints + - the thread to be examined is still the current thread + - this thread is currently being stepped + + If any of these events did not occur, we must have stopped due + to hitting a software breakpoint, and have to back up to the + breakpoint address. + + As a special case, we could have hardware single-stepped a + software breakpoint. In this case (prev_pc == breakpoint_pc), + we also need to back up to the breakpoint address. */ + + if (singlestep_breakpoints_inserted_p + || !ptid_equal (ecs->ptid, inferior_ptid) + || !currently_stepping (ecs) + || prev_pc == breakpoint_pc) + write_pc_pid (breakpoint_pc, ecs->ptid); } } @@ -1379,7 +1360,7 @@ handle_inferior_event (struct execution_control_state *ecs) (LONGEST) ecs->ws.value.integer)); gdb_flush (gdb_stdout); target_mourn_inferior (); - singlestep_breakpoints_inserted_p = 0; /* SOFTWARE_SINGLE_STEP_P() */ + singlestep_breakpoints_inserted_p = 0; stop_print_frame = 0; stop_stepping (ecs); return; @@ -1399,7 +1380,7 @@ handle_inferior_event (struct execution_control_state *ecs) target_mourn_inferior (); print_stop_reason (SIGNAL_EXITED, stop_signal); - singlestep_breakpoints_inserted_p = 0; /* SOFTWARE_SINGLE_STEP_P() */ + singlestep_breakpoints_inserted_p = 0; stop_stepping (ecs); return; @@ -1555,8 +1536,7 @@ handle_inferior_event (struct execution_control_state *ecs) if (stepping_past_singlestep_breakpoint) { - gdb_assert (SOFTWARE_SINGLE_STEP_P () - && singlestep_breakpoints_inserted_p); + gdb_assert (singlestep_breakpoints_inserted_p); gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid)); gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid)); @@ -1605,7 +1585,7 @@ handle_inferior_event (struct execution_control_state *ecs) if (!breakpoint_thread_match (stop_pc, ecs->ptid)) thread_hop_needed = 1; } - else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p) + else if (singlestep_breakpoints_inserted_p) { /* We have not context switched yet, so this should be true no matter which thread hit the singlestep breakpoint. */ @@ -1676,7 +1656,7 @@ handle_inferior_event (struct execution_control_state *ecs) /* Saw a breakpoint, but it was hit by the wrong thread. Just continue. */ - if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p) + if (singlestep_breakpoints_inserted_p) { /* Pull the single step breakpoints out of the target. */ remove_single_step_breakpoints (); @@ -1725,7 +1705,7 @@ handle_inferior_event (struct execution_control_state *ecs) return; } } - else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p) + else if (singlestep_breakpoints_inserted_p) { sw_single_step_trap_p = 1; ecs->random_signal = 0; @@ -1747,7 +1727,7 @@ handle_inferior_event (struct execution_control_state *ecs) deprecated_context_hook (pid_to_thread_id (ecs->ptid)); } - if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p) + if (singlestep_breakpoints_inserted_p) { /* Pull the single step breakpoints out of the target. */ remove_single_step_breakpoints (); -- 2.11.0