From 7b59d2d8d7980522bb4b532dcecb39bac3639726 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Fri, 25 May 2018 14:36:22 -0500 Subject: [PATCH] dt-bindings: new binding for Ilitek ILI9341 display panels This adds a new binding for Ilitek ILI9341 display panels. It includes a compatible string for one display (more can be added in the future). The YX240QV29-T panel[1] is found, for example, in an Adafruit breakout board[2] and in Mindsensors' PiStorms[3]. The vendor prefix "adafruit" is used because the actual vendor is not known, but Adafruit is the most common source for a product that contains this panel. [1]: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf [2]: https://www.adafruit.com/product/2478 [3]: http://www.mindsensors.com/stem-with-robotics/13-pistorms-v2-base-kit-raspberry-pi-brain-for-lego-robot Signed-off-by: David Lechner Reviewed-by: Rob Herring Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-4-david@lechnology.com --- .../devicetree/bindings/display/ilitek,ili9341.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt new file mode 100644 index 000000000000..169b32e4ee4e --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt @@ -0,0 +1,27 @@ +Ilitek ILI9341 display panels + +This binding is for display panels using an Ilitek ILI9341 controller in SPI +mode. + +Required properties: +- compatible: "adafruit,yx240qv29", "ilitek,ili9341" +- dc-gpios: D/C pin +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "adafruit,yx240qv29", "ilitek,ili9341"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = <&backlight>; + }; -- 2.11.0