From 7ce4669c8feefe0c772e9d5f3ae65160e20d8458 Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Thu, 21 Mar 2013 15:59:00 +0000 Subject: [PATCH] regulator: ab8500: Added get_optimum_mode on regulators with idle mode With this change, Vtvout, Vintcore12, Vaux1, 2 and 3 regulators support DRMS (Dynamic Regulator Mode Switching) which will dynamically handle requests for max current consumption from several consumers and select a suitable regulator mode. Signed-off-by: Bengt Jonsson Signed-off-by: Lee Jones Reviewed-by: Mattias WALLIN Signed-off-by: Mark Brown --- drivers/regulator/ab8500.c | 111 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 86 insertions(+), 25 deletions(-) diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 283d9a51114b..3465ac38bffe 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -31,6 +31,7 @@ * @desc: regulator description * @regulator_dev: regulator device * @is_enabled: status of regulator (on/off) + * @load_lp_uA: maximum load in idle (low power) mode * @update_bank: bank to control on/off * @update_reg: register to control on/off * @update_mask: mask to enable/disable and set mode of regulator @@ -48,6 +49,7 @@ struct ab8500_regulator_info { struct regulator_desc desc; struct regulator_dev *regulator; bool is_enabled; + int load_lp_uA; u8 update_bank; u8 update_reg; u8 update_mask; @@ -156,6 +158,27 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev) return ret; } +static unsigned int ab8500_regulator_get_optimum_mode( + struct regulator_dev *rdev, int input_uV, + int output_uV, int load_uA) +{ + unsigned int mode; + + struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) { + dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); + return -EINVAL; + } + + if (load_uA <= info->load_lp_uA) + mode = REGULATOR_MODE_IDLE; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + static int ab8500_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode) { @@ -186,6 +209,12 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev, if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set regulator mode\n"); + + dev_vdbg(rdev_get_dev(rdev), + "%s-set_mode (bank, reg, mask, value): " + "0x%x, 0x%x, 0x%x, 0x%x\n", + info->desc.name, info->update_bank, info->update_reg, + info->update_mask, info->update_val); } return ret; @@ -313,23 +342,37 @@ static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev, return info->delay; } -static struct regulator_ops ab8500_regulator_ops = { - .enable = ab8500_regulator_enable, - .disable = ab8500_regulator_disable, - .set_mode = ab8500_regulator_set_mode, - .get_mode = ab8500_regulator_get_mode, - .is_enabled = ab8500_regulator_is_enabled, - .get_voltage_sel = ab8500_regulator_get_voltage_sel, - .set_voltage_sel = ab8500_regulator_set_voltage_sel, - .list_voltage = regulator_list_voltage_table, - .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel, +static struct regulator_ops ab8500_regulator_volt_mode_ops = { + .enable = ab8500_regulator_enable, + .disable = ab8500_regulator_disable, + .is_enabled = ab8500_regulator_is_enabled, + .get_optimum_mode = ab8500_regulator_get_optimum_mode, + .set_mode = ab8500_regulator_set_mode, + .get_mode = ab8500_regulator_get_mode, + .get_voltage_sel = ab8500_regulator_get_voltage_sel, + .set_voltage_sel = ab8500_regulator_set_voltage_sel, + .list_voltage = regulator_list_voltage_table, + .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel, }; -static struct regulator_ops ab8500_regulator_fixed_ops = { - .enable = ab8500_regulator_enable, - .disable = ab8500_regulator_disable, - .is_enabled = ab8500_regulator_is_enabled, - .list_voltage = regulator_list_voltage_linear, +static struct regulator_ops ab8500_regulator_mode_ops = { + .enable = ab8500_regulator_enable, + .disable = ab8500_regulator_disable, + .is_enabled = ab8500_regulator_is_enabled, + .get_optimum_mode = ab8500_regulator_get_optimum_mode, + .set_mode = ab8500_regulator_set_mode, + .get_mode = ab8500_regulator_get_mode, + .get_voltage_sel = ab8500_regulator_get_voltage_sel, + .list_voltage = regulator_list_voltage_table, + .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel, +}; + +static struct regulator_ops ab8500_regulator_ops = { + .enable = ab8500_regulator_enable, + .disable = ab8500_regulator_disable, + .is_enabled = ab8500_regulator_is_enabled, + .get_voltage_sel = ab8500_regulator_get_voltage_sel, + .list_voltage = regulator_list_voltage_table, }; static struct ab8500_regulator_info @@ -343,13 +386,14 @@ static struct ab8500_regulator_info [AB8500_LDO_AUX1] = { .desc = { .name = "LDO-AUX1", - .ops = &ab8500_regulator_ops, + .ops = &ab8500_regulator_volt_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_AUX1, .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages), .volt_table = ldo_vauxn_voltages, }, + .load_lp_uA = 5000, .update_bank = 0x04, .update_reg = 0x09, .update_mask = 0x03, @@ -363,13 +407,14 @@ static struct ab8500_regulator_info [AB8500_LDO_AUX2] = { .desc = { .name = "LDO-AUX2", - .ops = &ab8500_regulator_ops, + .ops = &ab8500_regulator_volt_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_AUX2, .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages), .volt_table = ldo_vauxn_voltages, }, + .load_lp_uA = 5000, .update_bank = 0x04, .update_reg = 0x09, .update_mask = 0x0c, @@ -383,13 +428,14 @@ static struct ab8500_regulator_info [AB8500_LDO_AUX3] = { .desc = { .name = "LDO-AUX3", - .ops = &ab8500_regulator_ops, + .ops = &ab8500_regulator_volt_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_AUX3, .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages), .volt_table = ldo_vaux3_voltages, }, + .load_lp_uA = 5000, .update_bank = 0x04, .update_reg = 0x0a, .update_mask = 0x03, @@ -403,13 +449,14 @@ static struct ab8500_regulator_info [AB8500_LDO_INTCORE] = { .desc = { .name = "LDO-INTCORE", - .ops = &ab8500_regulator_ops, + .ops = &ab8500_regulator_volt_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_INTCORE, .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages), .volt_table = ldo_vintcore_voltages, }, + .load_lp_uA = 5000, .update_bank = 0x03, .update_reg = 0x80, .update_mask = 0x44, @@ -430,7 +477,7 @@ static struct ab8500_regulator_info [AB8500_LDO_TVOUT] = { .desc = { .name = "LDO-TVOUT", - .ops = &ab8500_regulator_fixed_ops, + .ops = &ab8500_regulator_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_TVOUT, .owner = THIS_MODULE, @@ -439,10 +486,13 @@ static struct ab8500_regulator_info .enable_time = 10000, }, .delay = 10000, + .load_lp_uA = 1000, .update_bank = 0x03, .update_reg = 0x80, .update_mask = 0x82, .update_val = 0x02, + .update_val_idle = 0x82, + .update_val_normal = 0x02, }, [AB8500_LDO_USB] = { .desc = { @@ -458,10 +508,14 @@ static struct ab8500_regulator_info .update_reg = 0x82, .update_mask = 0x03, }, + + /* + * Regulators with fixed voltage and normal mode + */ [AB8500_LDO_AUDIO] = { .desc = { .name = "LDO-AUDIO", - .ops = &ab8500_regulator_fixed_ops, + .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_AUDIO, .owner = THIS_MODULE, @@ -476,7 +530,7 @@ static struct ab8500_regulator_info [AB8500_LDO_ANAMIC1] = { .desc = { .name = "LDO-ANAMIC1", - .ops = &ab8500_regulator_fixed_ops, + .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_ANAMIC1, .owner = THIS_MODULE, @@ -491,7 +545,7 @@ static struct ab8500_regulator_info [AB8500_LDO_ANAMIC2] = { .desc = { .name = "LDO-ANAMIC2", - .ops = &ab8500_regulator_fixed_ops, + .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_ANAMIC2, .owner = THIS_MODULE, @@ -506,7 +560,7 @@ static struct ab8500_regulator_info [AB8500_LDO_DMIC] = { .desc = { .name = "LDO-DMIC", - .ops = &ab8500_regulator_fixed_ops, + .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_DMIC, .owner = THIS_MODULE, @@ -518,20 +572,27 @@ static struct ab8500_regulator_info .update_mask = 0x04, .update_val = 0x04, }, + + /* + * Regulators with fixed voltage and normal/idle modes + */ [AB8500_LDO_ANA] = { .desc = { .name = "LDO-ANA", - .ops = &ab8500_regulator_fixed_ops, + .ops = &ab8500_regulator_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_ANA, .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 1200000, }, + .load_lp_uA = 1000, .update_bank = 0x04, .update_reg = 0x06, .update_mask = 0x0c, .update_val = 0x04, + .update_val_idle = 0x0c, + .update_val_normal = 0x04, }, -- 2.11.0