From 7e90989141613e68ad8fceae63c1623954c96519 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 4 Nov 2020 11:11:56 -0800 Subject: [PATCH] Input: synaptics-rmi4 - fix kerneldoc warnings Fixes the kerneldoc warnings from building the driver with W=1. Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20201104162427.2984742-2-lee.jones@linaro.org [dtor: folded together several Lee's patches; added more descriptions] Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_bus.c | 2 +- drivers/input/rmi4/rmi_f01.c | 16 +-- drivers/input/rmi4/rmi_f11.c | 236 +++++++++++++++++++++++-------------------- drivers/input/rmi4/rmi_f54.c | 6 ++ drivers/input/rmi4/rmi_i2c.c | 4 + 5 files changed, 149 insertions(+), 115 deletions(-) diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c index 47d1b97ed6cf..24f31a5c0e04 100644 --- a/drivers/input/rmi4/rmi_bus.c +++ b/drivers/input/rmi4/rmi_bus.c @@ -286,7 +286,7 @@ void rmi_unregister_function(struct rmi_function *fn) /** * rmi_register_function_handler - register a handler for an RMI function * @handler: RMI handler that should be registered. - * @module: pointer to module that implements the handler + * @owner: pointer to module that implements the handler * @mod_name: name of the module implementing the handler * * This function performs additional setup of RMI function handler and diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c index e623c956376e..d7603c50f864 100644 --- a/drivers/input/rmi4/rmi_f01.c +++ b/drivers/input/rmi4/rmi_f01.c @@ -103,13 +103,15 @@ struct f01_basic_properties { #define RMI_F01_CTRL0_CONFIGURED_BIT BIT(7) /** - * @ctrl0 - see the bit definitions above. - * @doze_interval - controls the interval between checks for finger presence - * when the touch sensor is in doze mode, in units of 10ms. - * @wakeup_threshold - controls the capacitance threshold at which the touch - * sensor will decide to wake up from that low power state. - * @doze_holdoff - controls how long the touch sensor waits after the last - * finger lifts before entering the doze state, in units of 100ms. + * struct f01_device_control - controls basic sensor functions + * + * @ctrl0: see the bit definitions above. + * @doze_interval: controls the interval between checks for finger presence + * when the touch sensor is in doze mode, in units of 10ms. + * @wakeup_threshold: controls the capacitance threshold at which the touch + * sensor will decide to wake up from that low power state. + * @doze_holdoff: controls how long the touch sensor waits after the last + * finger lifts before entering the doze state, in units of 100ms. */ struct f01_device_control { u8 ctrl0; diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c index ffa39ab153f2..49ca9168685a 100644 --- a/drivers/input/rmi4/rmi_f11.c +++ b/drivers/input/rmi4/rmi_f11.c @@ -30,12 +30,12 @@ #define DEFAULT_MIN_ABS_MT_TRACKING_ID 1 #define DEFAULT_MAX_ABS_MT_TRACKING_ID 10 -/** A note about RMI4 F11 register structure. +/* + * A note about RMI4 F11 register structure. * - * The properties for - * a given sensor are described by its query registers. The number of query - * registers and the layout of their contents are described by the F11 device - * queries as well as the sensor query information. + * The properties for a given sensor are described by its query registers. The + * number of query registers and the layout of their contents are described by + * the F11 device queries as well as the sensor query information. * * Similarly, each sensor has control registers that govern its behavior. The * size and layout of the control registers for a given sensor can be determined @@ -62,8 +62,8 @@ /* maximum ABS_MT_POSITION displacement (in mm) */ #define DMAX 10 -/** - * @rezero - writing this to the F11 command register will cause the sensor to +/* + * Writing this to the F11 command register will cause the sensor to * calibrate to the current capacitive state. */ #define RMI_F11_REZERO 0x01 @@ -178,135 +178,157 @@ #define F11_UNIFORM_CLICKPAD 0x02 /** + * struct f11_2d_sensor_queries - describes sensor capabilities + * * Query registers 1 through 4 are always present. * - * @nr_fingers - describes the maximum number of fingers the 2-D sensor - * supports. - * @has_rel - the sensor supports relative motion reporting. - * @has_abs - the sensor supports absolute poition reporting. - * @has_gestures - the sensor supports gesture reporting. - * @has_sensitivity_adjust - the sensor supports a global sensitivity - * adjustment. - * @configurable - the sensor supports various configuration options. - * @num_of_x_electrodes - the maximum number of electrodes the 2-D sensor - * supports on the X axis. - * @num_of_y_electrodes - the maximum number of electrodes the 2-D sensor - * supports on the Y axis. - * @max_electrodes - the total number of X and Y electrodes that may be - * configured. + * @nr_fingers: describes the maximum number of fingers the 2-D sensor + * supports. + * @has_rel: the sensor supports relative motion reporting. + * @has_abs: the sensor supports absolute poition reporting. + * @has_gestures: the sensor supports gesture reporting. + * @has_sensitivity_adjust: the sensor supports a global sensitivity + * adjustment. + * @configurable: the sensor supports various configuration options. + * @nr_x_electrodes: the maximum number of electrodes the 2-D sensor + * supports on the X axis. + * @nr_y_electrodes: the maximum number of electrodes the 2-D sensor + * supports on the Y axis. + * @max_electrodes: the total number of X and Y electrodes that may be + * configured. * * Query 5 is present if the has_abs bit is set. * - * @abs_data_size - describes the format of data reported by the absolute - * data source. Only one format (the kind used here) is supported at this - * time. - * @has_anchored_finger - then the sensor supports the high-precision second - * finger tracking provided by the manual tracking and motion sensitivity - * options. - * @has_adjust_hyst - the difference between the finger release threshold and - * the touch threshold. - * @has_dribble - the sensor supports the generation of dribble interrupts, - * which may be enabled or disabled with the dribble control bit. - * @has_bending_correction - Bending related data registers 28 and 36, and - * control register 52..57 are present. - * @has_large_object_suppression - control register 58 and data register 28 - * exist. - * @has_jitter_filter - query 13 and control 73..76 exist. + * @abs_data_size: describes the format of data reported by the absolute + * data source. Only one format (the kind used here) is supported at this + * time. + * @has_anchored_finger: then the sensor supports the high-precision second + * finger tracking provided by the manual tracking and motion sensitivity + * options. + * @has_adj_hyst: the difference between the finger release threshold and + * the touch threshold. + * @has_dribble: the sensor supports the generation of dribble interrupts, + * which may be enabled or disabled with the dribble control bit. + * @has_bending_correction: Bending related data registers 28 and 36, and + * control register 52..57 are present. + * @has_large_object_suppression: control register 58 and data register 28 + * exist. + * @has_jitter_filter: query 13 and control 73..76 exist. + * + * Query 6 is present if the has_rel it is set. + * + * @f11_2d_query6: this register is reserved. * * Gesture information queries 7 and 8 are present if has_gestures bit is set. * - * @has_single_tap - a basic single-tap gesture is supported. - * @has_tap_n_hold - tap-and-hold gesture is supported. - * @has_double_tap - double-tap gesture is supported. - * @has_early_tap - early tap is supported and reported as soon as the finger - * lifts for any tap event that could be interpreted as either a single tap - * or as the first tap of a double-tap or tap-and-hold gesture. - * @has_flick - flick detection is supported. - * @has_press - press gesture reporting is supported. - * @has_pinch - pinch gesture detection is supported. - * @has_palm_det - the 2-D sensor notifies the host whenever a large conductive - * object such as a palm or a cheek touches the 2-D sensor. - * @has_rotate - rotation gesture detection is supported. - * @has_touch_shapes - TouchShapes are supported. A TouchShape is a fixed - * rectangular area on the sensor that behaves like a capacitive button. - * @has_scroll_zones - scrolling areas near the sensor edges are supported. - * @has_individual_scroll_zones - if 1, then 4 scroll zones are supported; - * if 0, then only two are supported. - * @has_mf_scroll - the multifinger_scrolling bit will be set when - * more than one finger is involved in a scrolling action. + * @has_single_tap: a basic single-tap gesture is supported. + * @has_tap_n_hold: tap-and-hold gesture is supported. + * @has_double_tap: double-tap gesture is supported. + * @has_early_tap: early tap is supported and reported as soon as the finger + * lifts for any tap event that could be interpreted as either a single + * tap or as the first tap of a double-tap or tap-and-hold gesture. + * @has_flick: flick detection is supported. + * @has_press: press gesture reporting is supported. + * @has_pinch: pinch gesture detection is supported. + * @has_chiral: chiral (circular) scrolling gesture detection is supported. + * @has_palm_det: the 2-D sensor notifies the host whenever a large conductive + * object such as a palm or a cheek touches the 2-D sensor. + * @has_rotate: rotation gesture detection is supported. + * @has_touch_shapes: TouchShapes are supported. A TouchShape is a fixed + * rectangular area on the sensor that behaves like a capacitive button. + * @has_scroll_zones: scrolling areas near the sensor edges are supported. + * @has_individual_scroll_zones: if 1, then 4 scroll zones are supported; + * if 0, then only two are supported. + * @has_mf_scroll: the multifinger_scrolling bit will be set when + * more than one finger is involved in a scrolling action. + * @has_mf_edge_motion: indicates whether multi-finger edge motion gesture + * is supported. + * @has_mf_scroll_inertia: indicates whether multi-finger scroll inertia + * feature is supported. * * Convenience for checking bytes in the gesture info registers. This is done * often enough that we put it here to declutter the conditionals * - * @query7_nonzero - true if none of the query 7 bits are set - * @query8_nonzero - true if none of the query 8 bits are set + * @query7_nonzero: true if none of the query 7 bits are set + * @query8_nonzero: true if none of the query 8 bits are set * * Query 9 is present if the has_query9 is set. * - * @has_pen - detection of a stylus is supported and registers F11_2D_Ctrl20 - * and F11_2D_Ctrl21 exist. - * @has_proximity - detection of fingers near the sensor is supported and - * registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist. - * @has_palm_det_sensitivity - the sensor supports the palm detect sensitivity - * feature and register F11_2D_Ctrl27 exists. - * @has_two_pen_thresholds - is has_pen is also set, then F11_2D_Ctrl35 exists. - * @has_contact_geometry - the sensor supports the use of contact geometry to - * map absolute X and Y target positions and registers F11_2D_Data18 - * through F11_2D_Data27 exist. + * @has_pen: detection of a stylus is supported and registers F11_2D_Ctrl20 + * and F11_2D_Ctrl21 exist. + * @has_proximity: detection of fingers near the sensor is supported and + * registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist. + * @has_palm_det_sensitivity: the sensor supports the palm detect sensitivity + * feature and register F11_2D_Ctrl27 exists. + * @has_suppress_on_palm_detect: the device supports the large object detect + * suppression feature and register F11_2D_Ctrl27 exists. + * @has_two_pen_thresholds: if has_pen is also set, then F11_2D_Ctrl35 exists. + * @has_contact_geometry: the sensor supports the use of contact geometry to + * map absolute X and Y target positions and registers F11_2D_Data18 + * through F11_2D_Data27 exist. + * @has_pen_hover_discrimination: if has_pen is also set, then registers + * F11_2D_Data29 through F11_2D_Data31, F11_2D_Ctrl68.*, F11_2D_Ctrl69 + * and F11_2D_Ctrl72 exist. + * @has_pen_filters: if has_pen is also set, then registers F11_2D_Ctrl70 and + * F11_2D_Ctrl71 exist. * * Touch shape info (query 10) is present if has_touch_shapes is set. * - * @nr_touch_shapes - the total number of touch shapes supported. + * @nr_touch_shapes: the total number of touch shapes supported. * * Query 11 is present if the has_query11 bit is set in query 0. * - * @has_z_tuning - if set, the sensor supports Z tuning and registers - * F11_2D_Ctrl29 through F11_2D_Ctrl33 exist. - * @has_algorithm_selection - controls choice of noise suppression algorithm - * @has_w_tuning - the sensor supports Wx and Wy scaling and registers - * F11_2D_Ctrl36 through F11_2D_Ctrl39 exist. - * @has_pitch_info - the X and Y pitches of the sensor electrodes can be - * configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist. - * @has_finger_size - the default finger width settings for the - * sensor can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44 - * exist. - * @has_segmentation_aggressiveness - the sensor’s ability to distinguish - * multiple objects close together can be configured and register F11_2D_Ctrl45 - * exists. - * @has_XY_clip - the inactive outside borders of the sensor can be - * configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist. - * @has_drumming_filter - the sensor can be configured to distinguish - * between a fast flick and a quick drumming movement and registers - * F11_2D_Ctrl50 and F11_2D_Ctrl51 exist. + * @has_z_tuning: if set, the sensor supports Z tuning and registers + * F11_2D_Ctrl29 through F11_2D_Ctrl33 exist. + * @has_algorithm_selection: controls choice of noise suppression algorithm + * @has_w_tuning: the sensor supports Wx and Wy scaling and registers + * F11_2D_Ctrl36 through F11_2D_Ctrl39 exist. + * @has_pitch_info: the X and Y pitches of the sensor electrodes can be + * configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist. + * @has_finger_size: the default finger width settings for the sensor + * can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44 + * exist. + * @has_segmentation_aggressiveness: the sensor’s ability to distinguish + * multiple objects close together can be configured and register + * F11_2D_Ctrl45 exists. + * @has_XY_clip: the inactive outside borders of the sensor can be + * configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist. + * @has_drumming_filter: the sensor can be configured to distinguish + * between a fast flick and a quick drumming movement and registers + * F11_2D_Ctrl50 and F11_2D_Ctrl51 exist. * * Query 12 is present if hasQuery12 bit is set. * - * @has_gapless_finger - control registers relating to gapless finger are - * present. - * @has_gapless_finger_tuning - additional control and data registers relating - * to gapless finger are present. - * @has_8bit_w - larger W value reporting is supported. - * @has_adjustable_mapping - TBD - * @has_info2 - the general info query14 is present - * @has_physical_props - additional queries describing the physical properties - * of the sensor are present. - * @has_finger_limit - indicates that F11 Ctrl 80 exists. - * @has_linear_coeff - indicates that F11 Ctrl 81 exists. + * @has_gapless_finger: control registers relating to gapless finger are + * present. + * @has_gapless_finger_tuning: additional control and data registers relating + * to gapless finger are present. + * @has_8bit_w: larger W value reporting is supported. + * @has_adjustable_mapping: TBD + * @has_info2: the general info query14 is present + * @has_physical_props: additional queries describing the physical properties + * of the sensor are present. + * @has_finger_limit: indicates that F11 Ctrl 80 exists. + * @has_linear_coeff_2: indicates that F11 Ctrl 81 exists. * * Query 13 is present if Query 5's has_jitter_filter bit is set. - * @jitter_window_size - used by Design Studio 4. - * @jitter_filter_type - used by Design Studio 4. + * + * @jitter_window_size: used by Design Studio 4. + * @jitter_filter_type: used by Design Studio 4. * * Query 14 is present if query 12's has_general_info2 flag is set. * - * @light_control - Indicates what light/led control features are present, if - * any. - * @is_clear - if set, this is a clear sensor (indicating direct pointing - * application), otherwise it's opaque (indicating indirect pointing). - * @clickpad_props - specifies if this is a clickpad, and if so what sort of - * mechanism it uses - * @mouse_buttons - specifies the number of mouse buttons present (if any). - * @has_advanced_gestures - advanced driver gestures are supported. + * @light_control: Indicates what light/led control features are present, + * if any. + * @is_clear: if set, this is a clear sensor (indicating direct pointing + * application), otherwise it's opaque (indicating indirect pointing). + * @clickpad_props: specifies if this is a clickpad, and if so what sort of + * mechanism it uses + * @mouse_buttons: specifies the number of mouse buttons present (if any). + * @has_advanced_gestures: advanced driver gestures are supported. + * + * @x_sensor_size_mm: size of the sensor in millimeters on the X axis. + * @y_sensor_size_mm: size of the sensor in millimeters on the Y axis. */ struct f11_2d_sensor_queries { /* query1 */ diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c index 6b23e679606e..93b328c796c6 100644 --- a/drivers/input/rmi4/rmi_f54.c +++ b/drivers/input/rmi4/rmi_f54.c @@ -42,6 +42,8 @@ /** * enum rmi_f54_report_type - RMI4 F54 report types * + * @F54_REPORT_NONE: No Image Report. + * * @F54_8BIT_IMAGE: Normalized 8-Bit Image Report. The capacitance variance * from baseline for each pixel. * @@ -64,6 +66,10 @@ * Report. Set Low reference to its minimum value and high * references to its maximum value, then report the raw * capacitance for each pixel. + * + * @F54_MAX_REPORT_TYPE: + * Maximum number of Report Types. Used for sanity + * checking. */ enum rmi_f54_report_type { F54_REPORT_NONE = 0, diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c index a95c2c9bcab4..50305fcfbef5 100644 --- a/drivers/input/rmi4/rmi_i2c.c +++ b/drivers/input/rmi4/rmi_i2c.c @@ -17,12 +17,16 @@ * struct rmi_i2c_xport - stores information for i2c communication * * @xport: The transport interface structure + * @client: The I2C client device structure * * @page_mutex: Locks current page to avoid changing pages in unexpected ways. * @page: Keeps track of the current virtual page * * @tx_buf: Buffer used for transmitting data to the sensor over i2c. * @tx_buf_size: Size of the buffer + * + * @supplies: Array of voltage regulators + * @startup_delay: Milliseconds to pause after powering up the regulators */ struct rmi_i2c_xport { struct rmi_transport_dev xport; -- 2.11.0