From 8011657b9e63cb2e914b9a0f75233b910c1854cb Mon Sep 17 00:00:00 2001 From: Christian Daudt Date: Wed, 13 Mar 2013 14:27:27 -0700 Subject: [PATCH] ARM: bcm281xx: Add timer driver (driver portion) This adds support for the Broadcom timer, used in the following SoCs: BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 Updates from V6: - Split DT portion into a separate patch Updates from V5: - Rebase to latest arm-soc/for-next Updates from V4: - Switch code to use CLOCKSOURCE_OF_DECLARE Updates from V3: - Migrate to 3.9 timer framework updates Updates from V2: - prepend static fns + fields with kona_ Updates from V1: - Rename bcm_timer.c to bcm_kona_timer.c - Pull .h into bcm_kona_timer.c - Make timers static - Clean up comment block - Switched to using clockevents_config_and_register - Added an error to the get_timer loop if it repeats too much - Added to Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt - Added missing readl to timer_disable_and_clear Note: bcm,kona-timer was kept as the 'compatible' field to make it specific enough for when there are multiple bcm timers (bcm,timer is too generic). Signed-off-by: Christian Daudt Acked-by: Arnd Bergmann Acked-by: John Stultz Reviewed-by: Stephen Warren Signed-off-by: John Stultz --- arch/arm/mach-bcm/Kconfig | 1 + arch/arm/mach-bcm/board_bcm.c | 7 +- drivers/clocksource/Makefile | 1 + drivers/clocksource/bcm_kona_timer.c | 211 +++++++++++++++++++++++++++++++++++ 4 files changed, 215 insertions(+), 5 deletions(-) create mode 100644 drivers/clocksource/bcm_kona_timer.c diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index bf02471d7e7c..f11289519c39 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -6,6 +6,7 @@ config ARCH_BCM select ARM_ERRATA_764369 if SMP select ARM_GIC select CPU_V7 + select CLKSRC_OF select GENERIC_CLOCKEVENTS select GENERIC_TIME select GPIO_BCM diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c index f0f9abafad29..259593540477 100644 --- a/arch/arm/mach-bcm/board_bcm.c +++ b/arch/arm/mach-bcm/board_bcm.c @@ -16,14 +16,11 @@ #include #include #include +#include #include #include -static void timer_init(void) -{ -} - static void __init board_init(void) { @@ -35,7 +32,7 @@ static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") .init_irq = irqchip_init, - .init_time = timer_init, + .init_time = clocksource_of_init, .init_machine = board_init, .dt_compat = bcm11351_dt_compat, MACHINE_END diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 4d8283aec5b5..96e25319659b 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o +obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c new file mode 100644 index 000000000000..350f49356458 --- /dev/null +++ b/drivers/clocksource/bcm_kona_timer.c @@ -0,0 +1,211 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + + +#define KONA_GPTIMER_STCS_OFFSET 0x00000000 +#define KONA_GPTIMER_STCLO_OFFSET 0x00000004 +#define KONA_GPTIMER_STCHI_OFFSET 0x00000008 +#define KONA_GPTIMER_STCM0_OFFSET 0x0000000C + +#define KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT 0 +#define KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT 4 + +struct kona_bcm_timers { + int tmr_irq; + void __iomem *tmr_regs; +}; + +static struct kona_bcm_timers timers; + +static u32 arch_timer_rate; + +/* + * We use the peripheral timers for system tick, the cpu global timer for + * profile tick + */ +static void kona_timer_disable_and_clear(void __iomem *base) +{ + uint32_t reg; + + /* + * clear and disable interrupts + * We are using compare/match register 0 for our system interrupts + */ + reg = readl(base + KONA_GPTIMER_STCS_OFFSET); + + /* Clear compare (0) interrupt */ + reg |= 1 << KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT; + /* disable compare */ + reg &= ~(1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT); + + writel(reg, base + KONA_GPTIMER_STCS_OFFSET); + +} + +static void +kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw) +{ + void __iomem *base = IOMEM(timer_base); + int loop_limit = 4; + + /* + * Read 64-bit free running counter + * 1. Read hi-word + * 2. Read low-word + * 3. Read hi-word again + * 4.1 + * if new hi-word is not equal to previously read hi-word, then + * start from #1 + * 4.2 + * if new hi-word is equal to previously read hi-word then stop. + */ + + while (--loop_limit) { + *msw = readl(base + KONA_GPTIMER_STCHI_OFFSET); + *lsw = readl(base + KONA_GPTIMER_STCLO_OFFSET); + if (*msw == readl(base + KONA_GPTIMER_STCHI_OFFSET)) + break; + } + if (!loop_limit) { + pr_err("bcm_kona_timer: getting counter failed.\n"); + pr_err(" Timer will be impacted\n"); + } + + return; +} + +static const struct of_device_id bcm_timer_ids[] __initconst = { + {.compatible = "bcm,kona-timer"}, + {}, +}; + +static void __init kona_timers_init(void) +{ + struct device_node *node; + u32 freq; + + node = of_find_matching_node(NULL, bcm_timer_ids); + + if (!node) + panic("No timer"); + + if (!of_property_read_u32(node, "clock-frequency", &freq)) + arch_timer_rate = freq; + else + panic("clock-frequency not set in the .dts file"); + + /* Setup IRQ numbers */ + timers.tmr_irq = irq_of_parse_and_map(node, 0); + + /* Setup IO addresses */ + timers.tmr_regs = of_iomap(node, 0); + + kona_timer_disable_and_clear(timers.tmr_regs); +} + +static int kona_timer_set_next_event(unsigned long clc, + struct clock_event_device *unused) +{ + /* + * timer (0) is disabled by the timer interrupt already + * so, here we reload the next event value and re-enable + * the timer. + * + * This way, we are potentially losing the time between + * timer-interrupt->set_next_event. CPU local timers, when + * they come in should get rid of skew. + */ + + uint32_t lsw, msw; + uint32_t reg; + + kona_timer_get_counter(timers.tmr_regs, &msw, &lsw); + + /* Load the "next" event tick value */ + writel(lsw + clc, timers.tmr_regs + KONA_GPTIMER_STCM0_OFFSET); + + /* Enable compare */ + reg = readl(timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET); + reg |= (1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT); + writel(reg, timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET); + + return 0; +} + +static void kona_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *unused) +{ + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + /* by default mode is one shot don't do any thing */ + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + kona_timer_disable_and_clear(timers.tmr_regs); + } +} + +static struct clock_event_device kona_clockevent_timer = { + .name = "timer 1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = kona_timer_set_next_event, + .set_mode = kona_timer_set_mode +}; + +static void __init kona_timer_clockevents_init(void) +{ + kona_clockevent_timer.cpumask = cpumask_of(0); + clockevents_config_and_register(&kona_clockevent_timer, + arch_timer_rate, 6, 0xffffffff); +} + +static irqreturn_t kona_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &kona_clockevent_timer; + + kona_timer_disable_and_clear(timers.tmr_regs); + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction kona_timer_irq = { + .name = "Kona Timer Tick", + .flags = IRQF_TIMER, + .handler = kona_timer_interrupt, +}; + +static void __init kona_timer_init(void) +{ + kona_timers_init(); + kona_timer_clockevents_init(); + setup_irq(timers.tmr_irq, &kona_timer_irq); + kona_timer_set_next_event((arch_timer_rate / HZ), NULL); +} + +CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", + kona_timer_init); -- 2.11.0