From 81c3e08f726921f244e11795a415d2acb5bdf071 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Fri, 14 May 2021 12:43:27 +0200 Subject: [PATCH] arm64: dts: qcom: msm8916-huawei-g7: Add display regulator The display on the Huawei Ascend G7 is supplied by a TI TPS65132 regulator. The panel needs a driver in mainline first, but the TPS65132 is already supported in mainline by the tps65132 driver. Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20210514104328.18756-4-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 32 ++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 3b558dc9e90f..5ad4e921b110 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -135,6 +135,30 @@ pinctrl-names = "default"; pinctrl-0 = <&prox_irq_default>; }; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + + pinctrl-names = "default"; + pinctrl-0 = <®_lcd_en_default>; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <5400000>; + regulator-max-microvolt = <5400000>; + enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + regulator-active-discharge = <1>; + }; + }; }; &blsp_i2c5 { @@ -370,6 +394,14 @@ bias-disable; }; + reg_lcd_en_default: reg-lcd-en-default { + pins = "gpio32", "gpio97"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + sdhc2_cd_default: sdhc2-cd-default { pins = "gpio56"; function = "gpio"; -- 2.11.0