From 81da8a8913e768d8ce0de9edb5699f3879c1dd51 Mon Sep 17 00:00:00 2001 From: Svetlana Orlik Date: Tue, 22 Mar 2016 18:07:22 +0300 Subject: [PATCH] staging: iio: accel: adis16204: Fix 'line over 80 characters' warning Many of the comments in the same lines with #define caused checkpatch warning 'line over 80 characters'. Move all such comments to line before #define. This style is already used in some other .h files in accel: Add blank lines after #define to improve readability. Signed-off-by: Svetlana Orlik Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/accel/adis16204.h | 159 +++++++++++++++++++++++++--------- 1 file changed, 118 insertions(+), 41 deletions(-) diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h index 0b23f0b5c52f..cfc4038ffdfb 100644 --- a/drivers/staging/iio/accel/adis16204.h +++ b/drivers/staging/iio/accel/adis16204.h @@ -3,53 +3,130 @@ #define ADIS16204_STARTUP_DELAY 220 /* ms */ -#define ADIS16204_FLASH_CNT 0x00 /* Flash memory write count */ -#define ADIS16204_SUPPLY_OUT 0x02 /* Output, power supply */ -#define ADIS16204_XACCL_OUT 0x04 /* Output, x-axis accelerometer */ -#define ADIS16204_YACCL_OUT 0x06 /* Output, y-axis accelerometer */ -#define ADIS16204_AUX_ADC 0x08 /* Output, auxiliary ADC input */ -#define ADIS16204_TEMP_OUT 0x0A /* Output, temperature */ -#define ADIS16204_X_PEAK_OUT 0x0C /* Twos complement */ -#define ADIS16204_Y_PEAK_OUT 0x0E /* Twos complement */ -#define ADIS16204_XACCL_NULL 0x10 /* Calibration, x-axis acceleration offset null */ -#define ADIS16204_YACCL_NULL 0x12 /* Calibration, y-axis acceleration offset null */ -#define ADIS16204_XACCL_SCALE 0x14 /* X-axis scale factor calibration register */ -#define ADIS16204_YACCL_SCALE 0x16 /* Y-axis scale factor calibration register */ -#define ADIS16204_XY_RSS_OUT 0x18 /* XY combined acceleration (RSS) */ -#define ADIS16204_XY_PEAK_OUT 0x1A /* Peak, XY combined output (RSS) */ -#define ADIS16204_CAP_BUF_1 0x1C /* Capture buffer output register 1 */ -#define ADIS16204_CAP_BUF_2 0x1E /* Capture buffer output register 2 */ -#define ADIS16204_ALM_MAG1 0x20 /* Alarm 1 amplitude threshold */ -#define ADIS16204_ALM_MAG2 0x22 /* Alarm 2 amplitude threshold */ -#define ADIS16204_ALM_CTRL 0x28 /* Alarm control */ -#define ADIS16204_CAPT_PNTR 0x2A /* Capture register address pointer */ -#define ADIS16204_AUX_DAC 0x30 /* Auxiliary DAC data */ -#define ADIS16204_GPIO_CTRL 0x32 /* General-purpose digital input/output control */ -#define ADIS16204_MSC_CTRL 0x34 /* Miscellaneous control */ -#define ADIS16204_SMPL_PRD 0x36 /* Internal sample period (rate) control */ -#define ADIS16204_AVG_CNT 0x38 /* Operation, filter configuration */ -#define ADIS16204_SLP_CNT 0x3A /* Operation, sleep mode control */ -#define ADIS16204_DIAG_STAT 0x3C /* Diagnostics, system status register */ -#define ADIS16204_GLOB_CMD 0x3E /* Operation, system command register */ +/* Flash memory write count */ +#define ADIS16204_FLASH_CNT 0x00 + +/* Output, power supply */ +#define ADIS16204_SUPPLY_OUT 0x02 + +/* Output, x-axis accelerometer */ +#define ADIS16204_XACCL_OUT 0x04 + +/* Output, y-axis accelerometer */ +#define ADIS16204_YACCL_OUT 0x06 + +/* Output, auxiliary ADC input */ +#define ADIS16204_AUX_ADC 0x08 + +/* Output, temperature */ +#define ADIS16204_TEMP_OUT 0x0A + +/* Twos complement */ +#define ADIS16204_X_PEAK_OUT 0x0C +#define ADIS16204_Y_PEAK_OUT 0x0E + +/* Calibration, x-axis acceleration offset null */ +#define ADIS16204_XACCL_NULL 0x10 + +/* Calibration, y-axis acceleration offset null */ +#define ADIS16204_YACCL_NULL 0x12 + +/* X-axis scale factor calibration register */ +#define ADIS16204_XACCL_SCALE 0x14 + +/* Y-axis scale factor calibration register */ +#define ADIS16204_YACCL_SCALE 0x16 + +/* XY combined acceleration (RSS) */ +#define ADIS16204_XY_RSS_OUT 0x18 + +/* Peak, XY combined output (RSS) */ +#define ADIS16204_XY_PEAK_OUT 0x1A + +/* Capture buffer output register 1 */ +#define ADIS16204_CAP_BUF_1 0x1C + +/* Capture buffer output register 2 */ +#define ADIS16204_CAP_BUF_2 0x1E + +/* Alarm 1 amplitude threshold */ +#define ADIS16204_ALM_MAG1 0x20 + +/* Alarm 2 amplitude threshold */ +#define ADIS16204_ALM_MAG2 0x22 + +/* Alarm control */ +#define ADIS16204_ALM_CTRL 0x28 + +/* Capture register address pointer */ +#define ADIS16204_CAPT_PNTR 0x2A + +/* Auxiliary DAC data */ +#define ADIS16204_AUX_DAC 0x30 + +/* General-purpose digital input/output control */ +#define ADIS16204_GPIO_CTRL 0x32 + +/* Miscellaneous control */ +#define ADIS16204_MSC_CTRL 0x34 + +/* Internal sample period (rate) control */ +#define ADIS16204_SMPL_PRD 0x36 + +/* Operation, filter configuration */ +#define ADIS16204_AVG_CNT 0x38 + +/* Operation, sleep mode control */ +#define ADIS16204_SLP_CNT 0x3A + +/* Diagnostics, system status register */ +#define ADIS16204_DIAG_STAT 0x3C + +/* Operation, system command register */ +#define ADIS16204_GLOB_CMD 0x3E /* MSC_CTRL */ -#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */ -#define ADIS16204_MSC_CTRL_SELF_TEST_EN BIT(8) /* Self-test enable */ -#define ADIS16204_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16204_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16204_MSC_CTRL_DATA_RDY_DIO2 BIT(0) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ + +/* Self-test at power-on: 1 = disabled, 0 = enabled */ +#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST BIT(10) + +/* Self-test enable */ +#define ADIS16204_MSC_CTRL_SELF_TEST_EN BIT(8) + +/* Data-ready enable: 1 = enabled, 0 = disabled */ +#define ADIS16204_MSC_CTRL_DATA_RDY_EN BIT(2) + +/* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16204_MSC_CTRL_ACTIVE_HIGH BIT(1) + +/* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ +#define ADIS16204_MSC_CTRL_DATA_RDY_DIO2 BIT(0) /* DIAG_STAT */ -#define ADIS16204_DIAG_STAT_ALARM2 BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16204_DIAG_STAT_ALARM1 BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag: 1 = error condition, - 0 = normal operation */ -#define ADIS16204_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */ -#define ADIS16204_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */ -#define ADIS16204_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */ -#define ADIS16204_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 2.975 V */ + +/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16204_DIAG_STAT_ALARM2 BIT(9) + +/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16204_DIAG_STAT_ALARM1 BIT(8) + +/* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */ +#define ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT 5 + +/* SPI communications failure */ +#define ADIS16204_DIAG_STAT_SPI_FAIL_BIT 3 + +/* Flash update failure */ +#define ADIS16204_DIAG_STAT_FLASH_UPT_BIT 2 + +/* Power supply above 3.625 V */ +#define ADIS16204_DIAG_STAT_POWER_HIGH_BIT 1 + +/* Power supply below 2.975 V */ +#define ADIS16204_DIAG_STAT_POWER_LOW_BIT 0 /* GLOB_CMD */ + #define ADIS16204_GLOB_CMD_SW_RESET BIT(7) #define ADIS16204_GLOB_CMD_CLEAR_STAT BIT(4) #define ADIS16204_GLOB_CMD_FACTORY_CAL BIT(1) -- 2.11.0