From 81f5471838c279c97f0b46f18e766c2ac0de8806 Mon Sep 17 00:00:00 2001 From: Manish Narani Date: Mon, 23 Jul 2018 20:32:01 +0530 Subject: [PATCH] iio: adc: xilinx: limit pcap clock frequency value This patch limits the xadc pcap clock frequency value to be less than 200MHz. This fixes the issue when zynq is booted at higher frequency values, pcap crosses the maximum limit of 200MHz(Fmax) as it is derived from IOPLL. If this limit is crossed it is required to alter the WEDGE and REDGE bits of XADC_CFG register to make timings better in the interface. So to avoid alteration of these bits every time, the pcap value should not cross the Fmax limit. Signed-off-by: Manish Narani Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc-core.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 23395fc5b267..0dd306d2c7f1 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -322,6 +322,7 @@ static irqreturn_t xadc_zynq_interrupt_handler(int irq, void *devid) #define XADC_ZYNQ_TCK_RATE_MAX 50000000 #define XADC_ZYNQ_IGAP_DEFAULT 20 +#define XADC_ZYNQ_PCAP_RATE_MAX 200000000 static int xadc_zynq_setup(struct platform_device *pdev, struct iio_dev *indio_dev, int irq) @@ -332,6 +333,7 @@ static int xadc_zynq_setup(struct platform_device *pdev, unsigned int div; unsigned int igap; unsigned int tck_rate; + int ret; /* TODO: Figure out how to make igap and tck_rate configurable */ igap = XADC_ZYNQ_IGAP_DEFAULT; @@ -343,6 +345,13 @@ static int xadc_zynq_setup(struct platform_device *pdev, if (!pcap_rate) return -EINVAL; + if (pcap_rate > XADC_ZYNQ_PCAP_RATE_MAX) { + ret = clk_set_rate(xadc->clk, + (unsigned long)XADC_ZYNQ_PCAP_RATE_MAX); + if (ret) + return ret; + } + if (tck_rate > pcap_rate / 2) { div = 2; } else { @@ -368,6 +377,12 @@ static int xadc_zynq_setup(struct platform_device *pdev, XADC_ZYNQ_CFG_REDGE | XADC_ZYNQ_CFG_WEDGE | tck_div | XADC_ZYNQ_CFG_IGAP(igap)); + if (pcap_rate > XADC_ZYNQ_PCAP_RATE_MAX) { + ret = clk_set_rate(xadc->clk, pcap_rate); + if (ret) + return ret; + } + return 0; } -- 2.11.0