From 862a4a7836ebe77beabcda844d03e1eab3e1cf19 Mon Sep 17 00:00:00 2001 From: Cory Tusar Date: Wed, 6 Jan 2016 22:55:01 -0500 Subject: [PATCH] Documentation: devicetree: Add DT bindings to eeprom_93xx46 driver. This commit documents bindings to be added to the eeprom_93xx46 driver which will allow: - Device word size and read-only attributes to be specified. - A device-specific compatible string for use with Atmel AT93C46D EEPROMs. - Specifying a GPIO line to function as a 'select' or 'enable' signal prior to accessing the EEPROM. Signed-off-by: Cory Tusar Acked-by: Rob Herring Tested-by: Chris Healy Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/misc/eeprom-93xx46.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.txt diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt new file mode 100644 index 000000000000..a8ebb4621f79 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt @@ -0,0 +1,25 @@ +EEPROMs (SPI) compatible with Microchip Technology 93xx46 family. + +Required properties: +- compatible : shall be one of: + "atmel,at93c46d" + "eeprom-93xx46" +- data-size : number of data bits per word (either 8 or 16) + +Optional properties: +- read-only : parameter-less property which disables writes to the EEPROM +- select-gpios : if present, specifies the GPIO that will be asserted prior to + each access to the EEPROM (e.g. for SPI bus multiplexing) + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + +Example: + eeprom@0 { + compatible = "eeprom-93xx46"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cs-high; + data-size = <8>; + select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + }; -- 2.11.0