From 86c1b9eff3f27c82bceabd3b5c76376b26d26e92 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 11 May 2017 16:56:22 -0700 Subject: [PATCH] drm/vc4: Adjust modes in DSI to work around the integer PLL divider. BCM2835's PLLD_DSI1 divider doesn't give us many choices for our pixel clocks, so to support panels on the Raspberry Pi we need to set a higher pixel clock rate than requested and adjust the mode we program to extend out the HFP so that the refresh rate matches. v2: Drop an unfinished comment (caught by Noralf) Signed-off-by: Eric Anholt Link: http://patchwork.freedesktop.org/patch/msgid/20170511235625.22427-2-eric@anholt.net Acked-by: Daniel Vetter --- drivers/gpu/drm/vc4/vc4_dsi.c | 112 ++++++++++++++++++++++++++++++++---------- 1 file changed, 86 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c index 160f981d1cf4..fdb387740b69 100644 --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c @@ -519,7 +519,8 @@ struct vc4_dsi { /* DSI channel for the panel we're connected to. */ u32 channel; u32 lanes; - enum mipi_dsi_pixel_format format; + u32 format; + u32 divider; u32 mode_flags; /* Input clock from CPRMAN to the digital PHY, for the DSI @@ -906,13 +907,67 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder) pm_runtime_put(dev); } +/* Extends the mode's blank intervals to handle BCM2835's integer-only + * DSI PLL divider. + * + * On 2835, PLLD is set to 2Ghz, and may not be changed by the display + * driver since most peripherals are hanging off of the PLLD_PER + * divider. PLLD_DSI1, which drives our DSI bit clock (and therefore + * the pixel clock), only has an integer divider off of DSI. + * + * To get our panel mode to refresh at the expected 60Hz, we need to + * extend the horizontal blank time. This means we drive a + * higher-than-expected clock rate to the panel, but that's what the + * firmware does too. + */ +static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); + struct vc4_dsi *dsi = vc4_encoder->dsi; + struct clk *phy_parent = clk_get_parent(dsi->pll_phy_clock); + unsigned long parent_rate = clk_get_rate(phy_parent); + unsigned long pixel_clock_hz = mode->clock * 1000; + unsigned long pll_clock = pixel_clock_hz * dsi->divider; + int divider; + + /* Find what divider gets us a faster clock than the requested + * pixel clock. + */ + for (divider = 1; divider < 8; divider++) { + if (parent_rate / divider < pll_clock) { + divider--; + break; + } + } + + /* Now that we've picked a PLL divider, calculate back to its + * pixel clock. + */ + pll_clock = parent_rate / divider; + pixel_clock_hz = pll_clock / dsi->divider; + + /* Round up the clk_set_rate() request slightly, since + * PLLD_DSI1 is an integer divider and its rate selection will + * never round up. + */ + adjusted_mode->clock = pixel_clock_hz / 1000 + 1; + + /* Given the new pixel clock, adjust HFP to keep vrefresh the same. */ + adjusted_mode->htotal = pixel_clock_hz / (mode->vrefresh * mode->vtotal); + adjusted_mode->hsync_end += adjusted_mode->htotal - mode->htotal; + adjusted_mode->hsync_start += adjusted_mode->htotal - mode->htotal; + + return true; +} + static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) { - struct drm_display_mode *mode = &encoder->crtc->mode; + struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); struct vc4_dsi *dsi = vc4_encoder->dsi; struct device *dev = &dsi->pdev->dev; - u32 format = 0, divider = 0; bool debug_dump_regs = false; unsigned long hs_clock; u32 ui_ns; @@ -940,26 +995,7 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) vc4_dsi_dump_regs(dsi); } - switch (dsi->format) { - case MIPI_DSI_FMT_RGB888: - format = DSI_PFORMAT_RGB888; - divider = 24 / dsi->lanes; - break; - case MIPI_DSI_FMT_RGB666: - format = DSI_PFORMAT_RGB666; - divider = 24 / dsi->lanes; - break; - case MIPI_DSI_FMT_RGB666_PACKED: - format = DSI_PFORMAT_RGB666_PACKED; - divider = 18 / dsi->lanes; - break; - case MIPI_DSI_FMT_RGB565: - format = DSI_PFORMAT_RGB565; - divider = 16 / dsi->lanes; - break; - } - - phy_clock = pixel_clock_hz * divider; + phy_clock = pixel_clock_hz * dsi->divider; ret = clk_set_rate(dsi->pll_phy_clock, phy_clock); if (ret) { dev_err(&dsi->pdev->dev, @@ -1134,8 +1170,9 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { DSI_PORT_WRITE(DISP0_CTRL, - VC4_SET_FIELD(divider, DSI_DISP0_PIX_CLK_DIV) | - VC4_SET_FIELD(format, DSI_DISP0_PFORMAT) | + VC4_SET_FIELD(dsi->divider, + DSI_DISP0_PIX_CLK_DIV) | + VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) | VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, DSI_DISP0_LP_STOP_CTRL) | DSI_DISP0_ST_END | @@ -1347,9 +1384,31 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host, dsi->lanes = device->lanes; dsi->channel = device->channel; - dsi->format = device->format; dsi->mode_flags = device->mode_flags; + switch (device->format) { + case MIPI_DSI_FMT_RGB888: + dsi->format = DSI_PFORMAT_RGB888; + dsi->divider = 24 / dsi->lanes; + break; + case MIPI_DSI_FMT_RGB666: + dsi->format = DSI_PFORMAT_RGB666; + dsi->divider = 24 / dsi->lanes; + break; + case MIPI_DSI_FMT_RGB666_PACKED: + dsi->format = DSI_PFORMAT_RGB666_PACKED; + dsi->divider = 18 / dsi->lanes; + break; + case MIPI_DSI_FMT_RGB565: + dsi->format = DSI_PFORMAT_RGB565; + dsi->divider = 16 / dsi->lanes; + break; + default: + dev_err(&dsi->pdev->dev, "Unknown DSI format: %d.\n", + dsi->format); + return 0; + } + if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) { dev_err(&dsi->pdev->dev, "Only VIDEO mode panels supported currently.\n"); @@ -1397,6 +1456,7 @@ static const struct mipi_dsi_host_ops vc4_dsi_host_ops = { static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = { .disable = vc4_dsi_encoder_disable, .enable = vc4_dsi_encoder_enable, + .mode_fixup = vc4_dsi_encoder_mode_fixup, }; static const struct of_device_id vc4_dsi_dt_match[] = { -- 2.11.0