From 87a18a6a565271a886d48df49e5e27ba99e26c60 Mon Sep 17 00:00:00 2001 From: Chaotian Jing Date: Thu, 19 May 2016 16:47:40 +0800 Subject: [PATCH] mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch() Some MMC hosts do not support MMC_CAP_WAIT_WHILE_BUSY, but implements the ->card_busy() callback. In such cases, extend __mmc_switch() to use this method to check card status after switch command. Signed-off-by: Chaotian Jing Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc_ops.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 62355bda608f..32de14450ea7 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -480,6 +480,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, u32 status = 0; bool use_r1b_resp = use_busy_signal; bool expired = false; + bool busy = false; mmc_retune_hold(host); @@ -535,19 +536,24 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, /* Must check status to be sure of no errors. */ timeout = jiffies + msecs_to_jiffies(timeout_ms); do { + /* + * Due to the possibility of being preempted after + * sending the status command, check the expiration + * time first. + */ + expired = time_after(jiffies, timeout); if (send_status) { - /* - * Due to the possibility of being preempted after - * sending the status command, check the expiration - * time first. - */ - expired = time_after(jiffies, timeout); err = __mmc_send_status(card, &status, ignore_crc); if (err) goto out; } if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) break; + if (host->ops->card_busy) { + if (!host->ops->card_busy(host)) + break; + busy = true; + } if (mmc_host_is_spi(host)) break; @@ -556,19 +562,20 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only * rely on waiting for the stated timeout to be sufficient. */ - if (!send_status) { + if (!send_status && !host->ops->card_busy) { mmc_delay(timeout_ms); goto out; } /* Timeout if the device never leaves the program state. */ - if (expired && R1_CURRENT_STATE(status) == R1_STATE_PRG) { + if (expired && + (R1_CURRENT_STATE(status) == R1_STATE_PRG || busy)) { pr_err("%s: Card stuck in programming state! %s\n", mmc_hostname(host), __func__); err = -ETIMEDOUT; goto out; } - } while (R1_CURRENT_STATE(status) == R1_STATE_PRG); + } while (R1_CURRENT_STATE(status) == R1_STATE_PRG || busy); err = mmc_switch_status_error(host, status); out: -- 2.11.0