From 8840a843dc14adc9b6e7b5454ca64116e110a17c Mon Sep 17 00:00:00 2001 From: John Snow Date: Thu, 21 Aug 2014 13:44:34 -0400 Subject: [PATCH] ahci: Add test_pci_spec to ahci-test. Adds a specification adherence test for AHCI where the boot-up values for the PCI configuration space are compared against the AHCI 1.3 specification. This test does not itself attempt to engage the device. Signed-off-by: John Snow Message-id: 1408643079-30675-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi --- tests/ahci-test.c | 305 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 299 insertions(+), 6 deletions(-) diff --git a/tests/ahci-test.c b/tests/ahci-test.c index cc49dba30f..0674d5e189 100644 --- a/tests/ahci-test.c +++ b/tests/ahci-test.c @@ -25,7 +25,7 @@ #include #include #include - +#include #include #include "libqtest.h" @@ -43,15 +43,36 @@ /*** Supplementary PCI Config Space IDs & Masks ***/ #define PCI_DEVICE_ID_INTEL_Q35_AHCI (0x2922) +#define PCI_MSI_FLAGS_RESERVED (0xFF00) +#define PCI_PM_CTRL_RESERVED (0xFC) +#define PCI_BCC(REG32) ((REG32) >> 24) +#define PCI_PI(REG32) (((REG32) >> 8) & 0xFF) +#define PCI_SCC(REG32) (((REG32) >> 16) & 0xFF) + +/*** Recognized AHCI Device Types ***/ +#define AHCI_INTEL_ICH9 (PCI_DEVICE_ID_INTEL_Q35_AHCI << 16 | \ + PCI_VENDOR_ID_INTEL) /*** Globals ***/ static QGuestAllocator *guest_malloc; static QPCIBus *pcibus; static char tmp_path[] = "/tmp/qtest.XXXXXX"; +static bool ahci_pedantic; +static uint32_t ahci_fingerprint; + +/*** Macro Utilities ***/ +#define ASSERT_BIT_SET(data, mask) g_assert_cmphex((data) & (mask), ==, (mask)) +#define ASSERT_BIT_CLEAR(data, mask) g_assert_cmphex((data) & (mask), ==, 0) /*** Function Declarations ***/ static QPCIDevice *get_ahci_device(void); static void free_ahci_device(QPCIDevice *dev); +static void ahci_test_pci_spec(QPCIDevice *ahci); +static void ahci_test_pci_caps(QPCIDevice *ahci, uint16_t header, + uint8_t offset); +static void ahci_test_satacap(QPCIDevice *ahci, uint8_t offset); +static void ahci_test_msicap(QPCIDevice *ahci, uint8_t offset); +static void ahci_test_pmcap(QPCIDevice *ahci, uint8_t offset); /*** Utilities ***/ @@ -61,7 +82,6 @@ static void free_ahci_device(QPCIDevice *dev); static QPCIDevice *get_ahci_device(void) { QPCIDevice *ahci; - uint16_t vendor_id, device_id; pcibus = qpci_init_pc(); @@ -69,11 +89,15 @@ static QPCIDevice *get_ahci_device(void) ahci = qpci_device_find(pcibus, QPCI_DEVFN(0x1F, 0x02)); g_assert(ahci != NULL); - vendor_id = qpci_config_readw(ahci, PCI_VENDOR_ID); - device_id = qpci_config_readw(ahci, PCI_DEVICE_ID); + ahci_fingerprint = qpci_config_readl(ahci, PCI_VENDOR_ID); - g_assert_cmphex(vendor_id, ==, PCI_VENDOR_ID_INTEL); - g_assert_cmphex(device_id, ==, PCI_DEVICE_ID_INTEL_Q35_AHCI); + switch (ahci_fingerprint) { + case AHCI_INTEL_ICH9: + break; + default: + /* Unknown device. */ + g_assert_not_reached(); + } return ahci; } @@ -145,6 +169,239 @@ static void ahci_shutdown(QPCIDevice *ahci) qtest_shutdown(); } +/*** Specification Adherence Tests ***/ + +/** + * Implementation for test_pci_spec. Ensures PCI configuration space is sane. + */ +static void ahci_test_pci_spec(QPCIDevice *ahci) +{ + uint8_t datab; + uint16_t data; + uint32_t datal; + + /* Most of these bits should start cleared until we turn them on. */ + data = qpci_config_readw(ahci, PCI_COMMAND); + ASSERT_BIT_CLEAR(data, PCI_COMMAND_MEMORY); + ASSERT_BIT_CLEAR(data, PCI_COMMAND_MASTER); + ASSERT_BIT_CLEAR(data, PCI_COMMAND_SPECIAL); /* Reserved */ + ASSERT_BIT_CLEAR(data, PCI_COMMAND_VGA_PALETTE); /* Reserved */ + ASSERT_BIT_CLEAR(data, PCI_COMMAND_PARITY); + ASSERT_BIT_CLEAR(data, PCI_COMMAND_WAIT); /* Reserved */ + ASSERT_BIT_CLEAR(data, PCI_COMMAND_SERR); + ASSERT_BIT_CLEAR(data, PCI_COMMAND_FAST_BACK); + ASSERT_BIT_CLEAR(data, PCI_COMMAND_INTX_DISABLE); + ASSERT_BIT_CLEAR(data, 0xF800); /* Reserved */ + + data = qpci_config_readw(ahci, PCI_STATUS); + ASSERT_BIT_CLEAR(data, 0x01 | 0x02 | 0x04); /* Reserved */ + ASSERT_BIT_CLEAR(data, PCI_STATUS_INTERRUPT); + ASSERT_BIT_SET(data, PCI_STATUS_CAP_LIST); /* must be set */ + ASSERT_BIT_CLEAR(data, PCI_STATUS_UDF); /* Reserved */ + ASSERT_BIT_CLEAR(data, PCI_STATUS_PARITY); + ASSERT_BIT_CLEAR(data, PCI_STATUS_SIG_TARGET_ABORT); + ASSERT_BIT_CLEAR(data, PCI_STATUS_REC_TARGET_ABORT); + ASSERT_BIT_CLEAR(data, PCI_STATUS_REC_MASTER_ABORT); + ASSERT_BIT_CLEAR(data, PCI_STATUS_SIG_SYSTEM_ERROR); + ASSERT_BIT_CLEAR(data, PCI_STATUS_DETECTED_PARITY); + + /* RID occupies the low byte, CCs occupy the high three. */ + datal = qpci_config_readl(ahci, PCI_CLASS_REVISION); + if (ahci_pedantic) { + /* AHCI 1.3 specifies that at-boot, the RID should reset to 0x00, + * Though in practice this is likely seldom true. */ + ASSERT_BIT_CLEAR(datal, 0xFF); + } + + /* BCC *must* equal 0x01. */ + g_assert_cmphex(PCI_BCC(datal), ==, 0x01); + if (PCI_SCC(datal) == 0x01) { + /* IDE */ + ASSERT_BIT_SET(0x80000000, datal); + ASSERT_BIT_CLEAR(0x60000000, datal); + } else if (PCI_SCC(datal) == 0x04) { + /* RAID */ + g_assert_cmphex(PCI_PI(datal), ==, 0); + } else if (PCI_SCC(datal) == 0x06) { + /* AHCI */ + g_assert_cmphex(PCI_PI(datal), ==, 0x01); + } else { + g_assert_not_reached(); + } + + datab = qpci_config_readb(ahci, PCI_CACHE_LINE_SIZE); + g_assert_cmphex(datab, ==, 0); + + datab = qpci_config_readb(ahci, PCI_LATENCY_TIMER); + g_assert_cmphex(datab, ==, 0); + + /* Only the bottom 7 bits must be off. */ + datab = qpci_config_readb(ahci, PCI_HEADER_TYPE); + ASSERT_BIT_CLEAR(datab, 0x7F); + + /* BIST is optional, but the low 7 bits must always start off regardless. */ + datab = qpci_config_readb(ahci, PCI_BIST); + ASSERT_BIT_CLEAR(datab, 0x7F); + + /* BARS 0-4 do not have a boot spec, but ABAR/BAR5 must be clean. */ + datal = qpci_config_readl(ahci, PCI_BASE_ADDRESS_5); + g_assert_cmphex(datal, ==, 0); + + qpci_config_writel(ahci, PCI_BASE_ADDRESS_5, 0xFFFFFFFF); + datal = qpci_config_readl(ahci, PCI_BASE_ADDRESS_5); + /* ABAR must be 32-bit, memory mapped, non-prefetchable and + * must be >= 512 bytes. To that end, bits 0-8 must be off. */ + ASSERT_BIT_CLEAR(datal, 0xFF); + + /* Capability list MUST be present, */ + datal = qpci_config_readl(ahci, PCI_CAPABILITY_LIST); + /* But these bits are reserved. */ + ASSERT_BIT_CLEAR(datal, ~0xFF); + g_assert_cmphex(datal, !=, 0); + + /* Check specification adherence for capability extenstions. */ + data = qpci_config_readw(ahci, datal); + + switch (ahci_fingerprint) { + case AHCI_INTEL_ICH9: + /* Intel ICH9 Family Datasheet 14.1.19 p.550 */ + g_assert_cmphex((data & 0xFF), ==, PCI_CAP_ID_MSI); + break; + default: + /* AHCI 1.3, Section 2.1.14 -- CAP must point to PMCAP. */ + g_assert_cmphex((data & 0xFF), ==, PCI_CAP_ID_PM); + } + + ahci_test_pci_caps(ahci, data, (uint8_t)datal); + + /* Reserved. */ + datal = qpci_config_readl(ahci, PCI_CAPABILITY_LIST + 4); + g_assert_cmphex(datal, ==, 0); + + /* IPIN might vary, but ILINE must be off. */ + datab = qpci_config_readb(ahci, PCI_INTERRUPT_LINE); + g_assert_cmphex(datab, ==, 0); +} + +/** + * Test PCI capabilities for AHCI specification adherence. + */ +static void ahci_test_pci_caps(QPCIDevice *ahci, uint16_t header, + uint8_t offset) +{ + uint8_t cid = header & 0xFF; + uint8_t next = header >> 8; + + g_test_message("CID: %02x; next: %02x", cid, next); + + switch (cid) { + case PCI_CAP_ID_PM: + ahci_test_pmcap(ahci, offset); + break; + case PCI_CAP_ID_MSI: + ahci_test_msicap(ahci, offset); + break; + case PCI_CAP_ID_SATA: + ahci_test_satacap(ahci, offset); + break; + + default: + g_test_message("Unknown CAP 0x%02x", cid); + } + + if (next) { + ahci_test_pci_caps(ahci, qpci_config_readw(ahci, next), next); + } +} + +/** + * Test SATA PCI capabilitity for AHCI specification adherence. + */ +static void ahci_test_satacap(QPCIDevice *ahci, uint8_t offset) +{ + uint16_t dataw; + uint32_t datal; + + g_test_message("Verifying SATACAP"); + + /* Assert that the SATACAP version is 1.0, And reserved bits are empty. */ + dataw = qpci_config_readw(ahci, offset + 2); + g_assert_cmphex(dataw, ==, 0x10); + + /* Grab the SATACR1 register. */ + datal = qpci_config_readw(ahci, offset + 4); + + switch (datal & 0x0F) { + case 0x04: /* BAR0 */ + case 0x05: /* BAR1 */ + case 0x06: + case 0x07: + case 0x08: + case 0x09: /* BAR5 */ + case 0x0F: /* Immediately following SATACR1 in PCI config space. */ + break; + default: + /* Invalid BARLOC for the Index Data Pair. */ + g_assert_not_reached(); + } + + /* Reserved. */ + g_assert_cmphex((datal >> 24), ==, 0x00); +} + +/** + * Test MSI PCI capability for AHCI specification adherence. + */ +static void ahci_test_msicap(QPCIDevice *ahci, uint8_t offset) +{ + uint16_t dataw; + uint32_t datal; + + g_test_message("Verifying MSICAP"); + + dataw = qpci_config_readw(ahci, offset + PCI_MSI_FLAGS); + ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_ENABLE); + ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_QSIZE); + ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_RESERVED); + + datal = qpci_config_readl(ahci, offset + PCI_MSI_ADDRESS_LO); + g_assert_cmphex(datal, ==, 0); + + if (dataw & PCI_MSI_FLAGS_64BIT) { + g_test_message("MSICAP is 64bit"); + datal = qpci_config_readl(ahci, offset + PCI_MSI_ADDRESS_HI); + g_assert_cmphex(datal, ==, 0); + dataw = qpci_config_readw(ahci, offset + PCI_MSI_DATA_64); + g_assert_cmphex(dataw, ==, 0); + } else { + g_test_message("MSICAP is 32bit"); + dataw = qpci_config_readw(ahci, offset + PCI_MSI_DATA_32); + g_assert_cmphex(dataw, ==, 0); + } +} + +/** + * Test Power Management PCI capability for AHCI specification adherence. + */ +static void ahci_test_pmcap(QPCIDevice *ahci, uint8_t offset) +{ + uint16_t dataw; + + g_test_message("Verifying PMCAP"); + + dataw = qpci_config_readw(ahci, offset + PCI_PM_PMC); + ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_PME_CLOCK); + ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_RESERVED); + ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_D1); + ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_D2); + + dataw = qpci_config_readw(ahci, offset + PCI_PM_CTRL); + ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_STATE_MASK); + ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_RESERVED); + ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_DATA_SEL_MASK); + ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_DATA_SCALE_MASK); +} + /******************************************************************************/ /* Test Interfaces */ /******************************************************************************/ @@ -159,6 +416,18 @@ static void test_sanity(void) ahci_shutdown(ahci); } +/** + * Ensure that the PCI configuration space for the AHCI device is in-line with + * the AHCI 1.3 specification for initial values. + */ +static void test_pci_spec(void) +{ + QPCIDevice *ahci; + ahci = ahci_boot(); + ahci_test_pci_spec(ahci); + ahci_shutdown(ahci); +} + /******************************************************************************/ int main(int argc, char **argv) @@ -166,10 +435,33 @@ int main(int argc, char **argv) const char *arch; int fd; int ret; + int c; + + static struct option long_options[] = { + {"pedantic", no_argument, 0, 'p' }, + {0, 0, 0, 0}, + }; /* Should be first to utilize g_test functionality, So we can see errors. */ g_test_init(&argc, &argv, NULL); + while (1) { + c = getopt_long(argc, argv, "", long_options, NULL); + if (c == -1) { + break; + } + switch (c) { + case -1: + break; + case 'p': + ahci_pedantic = 1; + break; + default: + fprintf(stderr, "Unrecognized ahci_test option.\n"); + g_assert_not_reached(); + } + } + /* Check architecture */ arch = qtest_get_arch(); if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) { @@ -186,6 +478,7 @@ int main(int argc, char **argv) /* Run the tests */ qtest_add_func("/ahci/sanity", test_sanity); + qtest_add_func("/ahci/pci_spec", test_pci_spec); ret = g_test_run(); -- 2.11.0