From 90ce62659994b87723ec6ba26815f9634c18e449 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Wed, 9 May 2018 14:01:34 +0200 Subject: [PATCH] ARM: dts: qcom-apq8064: use correct pci address for address translation For PCI, the second and third cell in ranges specifies the upper and lower target address for address translation. This target address will be used to program the internal address translation unit (iATU). The current device tree configuration will program the iATU to translate CPU accesses to 0x08000000 to PCI address 0x0 (with TLP type MEM). The device tree configuration also specifies that CPU acesses to 0x0fe00000 will be translated to PCI address 0x0 (with TLP type I/O). We cannot have both I/O space and memory space at PCI address 0x0. The PCI code already uses the CPU address when assigning addresses to memory BARs, so for memory space the PCI address should be the same as the CPU address. This also matches how all other device trees using snps,dw-pcie are configured. The existing configuration appears to work, even if it is incorrect. For some reason the iATU doesn't obey the existing configuration, and doesn't translate CPU accesses from 0x08000000 to PCI address 0x0. The reason why the existing configuration works at all is probably because the default behavior, when there is no match, is to use the untranslated address. This happens to work for memory space, since it's a 1:1 mapping. However, instead of relying on this behavior, let's configure the iATU correctly. Signed-off-by: Niklas Cassel Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index febf2efb393e..4a99c9255104 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1421,7 +1421,7 @@ #address-cells = <3>; #size-cells = <2>; ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ - 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */ interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; -- 2.11.0