From 91ec77924714b67a6fbe9f6631dd639012fb76eb Mon Sep 17 00:00:00 2001 From: Chen Yu Date: Tue, 8 Mar 2022 09:20:30 -0800 Subject: [PATCH] e1000e: Print PHY register address when MDI read/write fails There is occasional suspend error from e1000e which blocks the system from further suspending. And the issue was found on a WhiskeyLake-U platform with I219-V: [ 20.078957] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x780 [e1000e] returns -2 [ 20.078970] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -2 [ 20.078974] e1000e 0000:00:1f.6: PM: pci_pm_suspend+0x0/0x170 returned -2 after 371012 usecs [ 20.078978] e1000e 0000:00:1f.6: PM: failed to suspend async: error -2 According to the code flow, this might be caused by broken MDI read/write to PHY registers. However currently the code does not tell us which register is broken. Thus enhance the debug information to print the offender PHY register. So the next the issue is reproduced, this information could be used for narrow down. Acked-by: Paul Menzel Reported-by: Todd Brandt Signed-off-by: Chen Yu Tested-by: Naama Meir Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20220308172030.451566-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/e1000e/phy.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 0f0efee5fc8e..fd07c3679bb1 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -146,11 +146,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) break; } if (!(mdic & E1000_MDIC_READY)) { - e_dbg("MDI Read did not complete\n"); + e_dbg("MDI Read PHY Reg Address %d did not complete\n", offset); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - e_dbg("MDI Error\n"); + e_dbg("MDI Read PHY Reg Address %d Error\n", offset); return -E1000_ERR_PHY; } if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { @@ -210,11 +210,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) break; } if (!(mdic & E1000_MDIC_READY)) { - e_dbg("MDI Write did not complete\n"); + e_dbg("MDI Write PHY Reg Address %d did not complete\n", offset); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - e_dbg("MDI Error\n"); + e_dbg("MDI Write PHY Red Address %d Error\n", offset); return -E1000_ERR_PHY; } if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { -- 2.11.0