From 93c5aecc35c61414073d848e1ba637fc2cae98a8 Mon Sep 17 00:00:00 2001 From: Gary Lin Date: Tue, 19 Jan 2021 18:24:59 +0800 Subject: [PATCH] bpf,x64: Pad NOPs to make images converge more easily The x64 bpf jit expects bpf images converge within the given passes, but it could fail to do so with some corner cases. For example: l0: ja 40 l1: ja 40 [... repeated ja 40 ] l39: ja 40 l40: ret #0 This bpf program contains 40 "ja 40" instructions which are effectively NOPs and designed to be replaced with valid code dynamically. Ideally, bpf jit should optimize those "ja 40" instructions out when translating the bpf instructions into x64 machine code. However, do_jit() can only remove one "ja 40" for offset==0 on each pass, so it requires at least 40 runs to eliminate those JMPs and exceeds the current limit of passes(20). In the end, the program got rejected when BPF_JIT_ALWAYS_ON is set even though it's legit as a classic socket filter. To make bpf images more likely converge within 20 passes, this commit pads some instructions with NOPs in the last 5 passes: 1. conditional jumps A possible size variance comes from the adoption of imm8 JMP. If the offset is imm8, we calculate the size difference of this BPF instruction between the previous and the current pass and fill the gap with NOPs. To avoid the recalculation of jump offset, those NOPs are inserted before the JMP code, so we have to subtract the 2 bytes of imm8 JMP when calculating the NOP number. 2. BPF_JA There are two conditions for BPF_JA. a.) nop jumps If this instruction is not optimized out in the previous pass, instead of removing it, we insert the equivalent size of NOPs. b.) label jumps Similar to condition jumps, we prepend NOPs right before the JMP code. To make the code concise, emit_nops() is modified to use the signed len and return the number of inserted NOPs. For bpf-to-bpf, we always enable padding for the extra pass since there is only one extra run and the jump padding doesn't affected the images that converge without padding. After applying this patch, the corner case was loaded with the following jit code: flen=45 proglen=77 pass=17 image=ffffffffc03367d4 from=jump pid=10097 JIT code: 00000000: 0f 1f 44 00 00 55 48 89 e5 53 41 55 31 c0 45 31 JIT code: 00000010: ed 48 89 fb eb 30 eb 2e eb 2c eb 2a eb 28 eb 26 JIT code: 00000020: eb 24 eb 22 eb 20 eb 1e eb 1c eb 1a eb 18 eb 16 JIT code: 00000030: eb 14 eb 12 eb 10 eb 0e eb 0c eb 0a eb 08 eb 06 JIT code: 00000040: eb 04 eb 02 66 90 31 c0 41 5d 5b c9 c3 0: 0f 1f 44 00 00 nop DWORD PTR [rax+rax*1+0x0] 5: 55 push rbp 6: 48 89 e5 mov rbp,rsp 9: 53 push rbx a: 41 55 push r13 c: 31 c0 xor eax,eax e: 45 31 ed xor r13d,r13d 11: 48 89 fb mov rbx,rdi 14: eb 30 jmp 0x46 16: eb 2e jmp 0x46 ... 3e: eb 06 jmp 0x46 40: eb 04 jmp 0x46 42: eb 02 jmp 0x46 44: 66 90 xchg ax,ax 46: 31 c0 xor eax,eax 48: 41 5d pop r13 4a: 5b pop rbx 4b: c9 leave 4c: c3 ret At the 16th pass, 15 jumps were already optimized out, and one jump was replaced with NOPs at 44 and the image converged at the 17th pass. v4: - Add the detailed comments about the possible padding bytes v3: - Copy the instructions of prologue separately or the size calculation of the first BPF instruction would include the prologue. - Replace WARN_ONCE() with pr_err() and EFAULT - Use MAX_PASSES in the for loop condition check - Remove the "padded" flag from x64_jit_data. For the extra pass of subprogs, padding is always enabled since it won't hurt the images that converge without padding. v2: - Simplify the sample code in the description and provide the jit code - Check the expected padding bytes with WARN_ONCE - Move the 'padded' flag to 'struct x64_jit_data' Signed-off-by: Gary Lin Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20210119102501.511-2-glin@suse.com --- arch/x86/net/bpf_jit_comp.c | 140 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 112 insertions(+), 28 deletions(-) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 1d4d50199293..b7a2911bda77 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -869,8 +869,31 @@ static void detect_reg_usage(struct bpf_insn *insn, int insn_cnt, } } +static int emit_nops(u8 **pprog, int len) +{ + u8 *prog = *pprog; + int i, noplen, cnt = 0; + + while (len > 0) { + noplen = len; + + if (noplen > ASM_NOP_MAX) + noplen = ASM_NOP_MAX; + + for (i = 0; i < noplen; i++) + EMIT1(ideal_nops[noplen][i]); + len -= noplen; + } + + *pprog = prog; + + return cnt; +} + +#define INSN_SZ_DIFF (((addrs[i] - addrs[i - 1]) - (prog - temp))) + static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, - int oldproglen, struct jit_context *ctx) + int oldproglen, struct jit_context *ctx, bool jmp_padding) { bool tail_call_reachable = bpf_prog->aux->tail_call_reachable; struct bpf_insn *insn = bpf_prog->insnsi; @@ -880,7 +903,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, bool seen_exit = false; u8 temp[BPF_MAX_INSN_SIZE + BPF_INSN_SAFETY]; int i, cnt = 0, excnt = 0; - int proglen = 0; + int ilen, proglen = 0; u8 *prog = temp; int err; @@ -894,7 +917,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, bpf_prog_was_classic(bpf_prog), tail_call_reachable, bpf_prog->aux->func_idx != 0); push_callee_regs(&prog, callee_regs_used); - addrs[0] = prog - temp; + + ilen = prog - temp; + if (image) + memcpy(image + proglen, temp, ilen); + proglen += ilen; + addrs[0] = proglen; + prog = temp; for (i = 1; i <= insn_cnt; i++, insn++) { const s32 imm32 = insn->imm; @@ -903,8 +932,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, u8 b2 = 0, b3 = 0; s64 jmp_offset; u8 jmp_cond; - int ilen; u8 *func; + int nops; switch (insn->code) { /* ALU */ @@ -1502,6 +1531,30 @@ emit_cond_jmp: /* Convert BPF opcode to x86 */ } jmp_offset = addrs[i + insn->off] - addrs[i]; if (is_imm8(jmp_offset)) { + if (jmp_padding) { + /* To keep the jmp_offset valid, the extra bytes are + * padded before the jump insn, so we substract the + * 2 bytes of jmp_cond insn from INSN_SZ_DIFF. + * + * If the previous pass already emits an imm8 + * jmp_cond, then this BPF insn won't shrink, so + * "nops" is 0. + * + * On the other hand, if the previous pass emits an + * imm32 jmp_cond, the extra 4 bytes(*) is padded to + * keep the image from shrinking further. + * + * (*) imm32 jmp_cond is 6 bytes, and imm8 jmp_cond + * is 2 bytes, so the size difference is 4 bytes. + */ + nops = INSN_SZ_DIFF - 2; + if (nops != 0 && nops != 4) { + pr_err("unexpected jmp_cond padding: %d bytes\n", + nops); + return -EFAULT; + } + cnt += emit_nops(&prog, nops); + } EMIT2(jmp_cond, jmp_offset); } else if (is_simm32(jmp_offset)) { EMIT2_off32(0x0F, jmp_cond + 0x10, jmp_offset); @@ -1524,11 +1577,55 @@ emit_cond_jmp: /* Convert BPF opcode to x86 */ else jmp_offset = addrs[i + insn->off] - addrs[i]; - if (!jmp_offset) - /* Optimize out nop jumps */ + if (!jmp_offset) { + /* + * If jmp_padding is enabled, the extra nops will + * be inserted. Otherwise, optimize out nop jumps. + */ + if (jmp_padding) { + /* There are 3 possible conditions. + * (1) This BPF_JA is already optimized out in + * the previous run, so there is no need + * to pad any extra byte (0 byte). + * (2) The previous pass emits an imm8 jmp, + * so we pad 2 bytes to match the previous + * insn size. + * (3) Similarly, the previous pass emits an + * imm32 jmp, and 5 bytes is padded. + */ + nops = INSN_SZ_DIFF; + if (nops != 0 && nops != 2 && nops != 5) { + pr_err("unexpected nop jump padding: %d bytes\n", + nops); + return -EFAULT; + } + cnt += emit_nops(&prog, nops); + } break; + } emit_jmp: if (is_imm8(jmp_offset)) { + if (jmp_padding) { + /* To avoid breaking jmp_offset, the extra bytes + * are padded before the actual jmp insn, so + * 2 bytes is substracted from INSN_SZ_DIFF. + * + * If the previous pass already emits an imm8 + * jmp, there is nothing to pad (0 byte). + * + * If it emits an imm32 jmp (5 bytes) previously + * and now an imm8 jmp (2 bytes), then we pad + * (5 - 2 = 3) bytes to stop the image from + * shrinking further. + */ + nops = INSN_SZ_DIFF - 2; + if (nops != 0 && nops != 3) { + pr_err("unexpected jump padding: %d bytes\n", + nops); + return -EFAULT; + } + cnt += emit_nops(&prog, INSN_SZ_DIFF - 2); + } EMIT2(0xEB, jmp_offset); } else if (is_simm32(jmp_offset)) { EMIT1_off32(0xE9, jmp_offset); @@ -1671,26 +1768,6 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog, return 0; } -static void emit_nops(u8 **pprog, unsigned int len) -{ - unsigned int i, noplen; - u8 *prog = *pprog; - int cnt = 0; - - while (len > 0) { - noplen = len; - - if (noplen > ASM_NOP_MAX) - noplen = ASM_NOP_MAX; - - for (i = 0; i < noplen; i++) - EMIT1(ideal_nops[noplen][i]); - len -= noplen; - } - - *pprog = prog; -} - static void emit_align(u8 **pprog, u32 align) { u8 *target, *prog = *pprog; @@ -2065,6 +2142,9 @@ struct x64_jit_data { struct jit_context ctx; }; +#define MAX_PASSES 20 +#define PADDING_PASSES (MAX_PASSES - 5) + struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) { struct bpf_binary_header *header = NULL; @@ -2074,6 +2154,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) struct jit_context ctx = {}; bool tmp_blinded = false; bool extra_pass = false; + bool padding = false; u8 *image = NULL; int *addrs; int pass; @@ -2110,6 +2191,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) image = jit_data->image; header = jit_data->header; extra_pass = true; + padding = true; goto skip_init_addrs; } addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL); @@ -2135,8 +2217,10 @@ skip_init_addrs: * may converge on the last pass. In such case do one more * pass to emit the final image. */ - for (pass = 0; pass < 20 || image; pass++) { - proglen = do_jit(prog, addrs, image, oldproglen, &ctx); + for (pass = 0; pass < MAX_PASSES || image; pass++) { + if (!padding && pass >= PADDING_PASSES) + padding = true; + proglen = do_jit(prog, addrs, image, oldproglen, &ctx, padding); if (proglen <= 0) { out_image: image = NULL; -- 2.11.0